6ES7414-2XK05-0AB0 CPU 414-2 – ngừng SX, mã thay thế

Name: Siemens 6ES7414-2XK05-0AB0
Brand: Siemens
SKU: 6ES7414-2XK05-0AB0

Siemens 6ES7414-2XK05-0AB0 là CPU PLC thuộc dòng SIMATIC S7-400. Mô tả đặt hàng theo Siemens: SIMATIC S7-400, CPU 414-2 central processing unit with: work memory 1 MB, (0.5 MB code, 0.5 MB data), 1st interface MPI/DP 12 Mbps, 2nd interface PROFIBUS DP. Thông số nổi bật của 6ES7414-2XK05-0AB0: Bộ nhớ chương trình: 1 MB; Điện áp nguồn: Power supply via system power supply; Tốc độ truyền: 12 Mbit/s; Phiên bản firmware: V5.3.

Tên gọi khác: PLC CPU; bộ xử lý PLC.

Thông số nổi bật 6ES7414-2XK05-0AB0

Bộ nhớ chương trình1 MB

Điện áp nguồnPower supply via system power supply

Tốc độ truyền12 Mbit/s

Phiên bản firmwareV5.3

Tổn hao công suất4.5 W

Kiểu sản phẩmCPU 414-2

Kích thước (R×C×S)25 mm x 290 mm x 219 mm

Tóm tắt nhanh

Mã đặt hàng (MLFB)6ES7414-2XK05-0AB0

Cách viết khác6ES7 414-2XK05-0AB0, 6ES74142XK050AB0

Dòng sản phẩmSIMATIC S7-400

Loại thiết bịCPU PLC

Mô tả SiemensSIMATIC S7-400, CPU 414-2 central processing unit with: work memory 1 MB, (0.5 MB code, 0.5 MB data), 1st interface MPI/DP 12 Mbps, 2nd interface PROFIBUS DP

Trạng thái vòng đờiNgừng sản xuất P.M410 since 2016-12-01; spare-part delivery listed until 2028-10-01; substitute 6ES7414-2XL07-0AB0

Xuất kho tiêu chuẩn (Siemens)theo yêu cầu

Mã thay thế6ES7414-2XL07-0AB0

Khối lượng tịnh0.856 kg

Xuất xứĐức

Mã HS85389091

EAN4019169147347

Trạng thái vòng đời và mã thay thế

6ES7414-2XK05-0AB0 đã ngừng sản xuất (PM410 từ 01/12/2016). Siemens chỉ còn cung cấp mã này dưới dạng phụ tùng thay thế đến 01/10/2028. Fast Group cung ứng từ nguồn hàng còn lại hoặc mã kế nhiệm tương thích. Trạng thái kiểm tra trên SiePortal ngày 23/09/2026; xem thêm hàng Siemens ngừng sản xuất và mã thay thế.

So sánh 6ES7414-2XK05-0AB0 với các mã cùng dòng SIMATIC S7-400

Mã	Mô tả	Thông số chính	Trạng thái
6ES7407-0KR02-0AA0	Power supply PS407; 10 A, wide range, UC 120/230V	Power supply PS407; 10 A, wide range, UC 120/230V	Đang cung cấp
6ES7410-5HX08-0AB0	CPU 410-5H	Bộ nhớ chương trình: 32 MB; max., dependent on the System Expansion Card used; Số cổng PROFINET: 2	Đang cung cấp
6ES7412-5HK06-0AB0	CPU 412-5H PN/DP	Bộ nhớ chương trình: 1 MB; Điện áp nguồn: Power supply via system power supply	Đang cung cấp
6ES7414-2XK05-0AB0 (đang xem)	CPU 414-2	Bộ nhớ chương trình: 1 MB; Điện áp nguồn: Power supply via system power supply	Ngừng sản xuất
6ES7414-2XL07-0AB0	CPU 414-2	Bộ nhớ chương trình: 2 MB; Điện áp nguồn: Power supply via system power supply	Đang cung cấp
6ES7414-3XM07-0AB0	CPU 414-3	Bộ nhớ chương trình: 4 MB; Điện áp nguồn: Power supply via system power supply	Đang cung cấp
6ES7416-3XS07-0AB0	CPU 416-3	Bộ nhớ chương trình: 16 MB; Điện áp nguồn: Power supply via system power supply	Đang cung cấp
6ES7417-5HT06-0AB0	CPU 417-5H PN/DP	Bộ nhớ chương trình: 32 MB; Điện áp nguồn: Power supply via system power supply	Đang cung cấp

Cung ứng 6ES7414-2XK05-0AB0 tại Fast Group

Fast Group – đại lý cung cấp thiết bị Siemens chính hãng – cung ứng 6ES7414-2XK05-0AB0 với các hạng mục:

Xác nhận 6ES7414-2XK05-0AB0 theo nhãn thiết bị hiện hữu, bao gồm phiên bản firmware.
Cung ứng từ nguồn hàng còn lại, tình trạng hàng ghi rõ trong báo giá.
Hồ sơ CO, CQ, packing list, hóa đơn VAT và tờ khai hải quan theo yêu cầu đơn hàng; giao hàng toàn quốc.

Thông tin cho yêu cầu báo giá 6ES7414-2XK05-0AB0

Mã MLFB
số lượng
hàng mới chính hãng hay surplus
firmware (CPU/HMI)
yêu cầu CO/CQ
thời gian cần hàng
địa điểm giao hàng
chấp nhận mã thay thế (Có/Không)

Thông số kỹ thuật 6ES7414-2XK05-0AB0 theo datasheet

Bảng dưới đây trích từ datasheet Siemens (tiếng Anh) để tham khảo khi lập yêu cầu kỹ thuật; thông số cuối cùng được xác nhận khi báo giá. Tải datasheet PDF từ Siemens.

General information (5)

Product type designation	CPU 414-2
HW functional status	03
Firmware version	V5.3
Isochronous mode	Yes; For PROFIBUS only
Programming package	STEP 7 V5.3 SP2 or higher with HW update

CiR - Configuration in RUN (2)

CiR synchronization time, basic load	100 ms
CiR synchronization time, time per I/O byte	15 µs

Supply voltage (1)

Rated value (DC)

Power supply via system power supply

Input current (4)

from backplane bus 5 V DC, typ.	0.9 A
from backplane bus 5 V DC, max.	1.1 A
from backplane bus 24 V DC, max.	300 mA; 150 mA per DP interface
from interface 5 V DC, max.	90 mA; At each DP interface

Power loss (1)

Power loss, typ.

4.5 W

Storage (13)

Type of memory	RAM
integrated	1 Mbyte
integrated (for program)	0.5 Mbyte
integrated (for data)	0.5 Mbyte
expandable	No
expandable FEPROM	Yes; with Memory Card (FLASH)
expandable FEPROM, max.	64 Mbyte
integrated RAM, max.	512 kbyte
expandable RAM	Yes; with Memory Card (RAM)
expandable RAM, max.	64 Mbyte
present	Yes
with battery	Yes; all data
without battery	No

Battery (4)

Backup current, typ.	125 µA; up to 40 °C
Backup current, max.	550 µA
Backup time, max.	See reference manual, module data, Chapter 3.3
Feeding of external backup voltage to CPU	5 V DC to 15 V DC

CPU processing times (4)

for bit operations, typ.	45 ns
for word operations, typ.	45 ns
for fixed point arithmetic, typ.	45 ns
for floating point arithmetic, typ.	135 ns

CPU-blocks (22)

Number, max.	6 000; Number range: 1 to 16000
Size, max.	64 kbyte
Number, max.	3 000; Number range: 0 to 7999
Size, max.	64 kbyte
Number, max.	3 000; Number range: 0 to 7999
Size, max.	64 kbyte
Number, max.	see instruction list
Size, max.	64 kbyte
Number of free cycle OBs	1; OB 1
Number of time alarm OBs	4; OB 10-13
Number of delay alarm OBs	4; OB 20-23
Number of cyclic interrupt OBs	4; OB 32-35 (shortest cycle that can be set = 500 µs)
Number of process alarm OBs	4; OB 40-43
Number of DPV1 alarm OBs	3; OB 55-57
Number of isochronous mode OBs	3; OB 61-63
Number of multicomputing OBs	1; OB 60
Number of background OBs	1; OB 90
Number of startup OBs	3; OB 100-102
Number of asynchronous error OBs	9; OB 80-88
Number of synchronous error OBs	2; OB 121, 122
per priority class	24
additional within an error OB	1

Counters, timers and their retentivity (16)

Number	2 048
adjustable	Yes
preset	Z 0 to Z 7
lower limit	0
upper limit	999
present	Yes
Type	SFB
Number	Unlimited (limited only by RAM capacity)
Number	2 048
adjustable	Yes
preset	No times retentive
lower limit	10 ms
upper limit	9 990 s
present	Yes
Type	SFB
Number	Unlimited (limited only by RAM capacity)

Data areas and their retentivity (7)

Retentive data area (incl. timers, counters, flags), max.	Total working and load memory (with backup battery)
Size, max.	8 kbyte; Size of bit memory address area
Retentivity available	Yes
Retentivity preset	MB 0 to MB 15
Number of clock memories	8; in 1 memory byte
adjustable, max.	16 kbyte
preset	8 kbyte

Address area (17)

Inputs	8 kbyte
Outputs	8 kbyte
Inputs, adjustable	8 kbyte
Outputs, adjustable	8 kbyte
Inputs, default	256 byte
Outputs, default	256 byte
consistent data, max.	244 byte
Access to consistent data in process image	Yes
Number of subprocess images, max.	15
Inputs	65 536
of which central	65 536
Outputs	65 536
of which central	65 536
Inputs	4 096
of which central	4 096
Outputs	4 096
of which central	4 096

Hardware configuration (19)

Integrated power supply	No
Number of expansion units, max.	21
connectable OPs	31
Multicomputing	Yes; 4 CPUs max. (with UR1 or UR2)
Number of connectable IMs (total), max.	6
Number of connectable IM 460s, max.	6
Number of connectable IM 463s, max.	4; IM 463-2
integrated	2
via CP	10; CP 443-5 Extended
via IM 467	4
Mixed mode IM + CP permitted	No; IM 467 not suitable for use with CP 443-5 Ext. and CP 443-1 EX4x, EX20, GX20 (in PROFINET IO mode)
via interface module	0
Number of pluggable S5 modules (via adapter capsule in central device), max.	6
integrated	0
Via CP	4; No mixed operation of CP443-1 EX40 and CP443-1 EX 41/EX20/GX20, max. 4 in central controller
FM	Limited by number of slots and number of connections
CP, PtP	CP 440: Limited by number of slots; CP 441: limited by number of connections
PROFIBUS and Ethernet CPs	14; Of which 10 CPs max. or IMs as DP master, 4 PROFINET controller maximum
required slots	1

Time of day (19)

Hardware clock (real-time)	Yes
retentive and synchronizable	Yes
Resolution	1 ms
Deviation per day (buffered), max.	1.7 s; Power off
Deviation per day (unbuffered), max.	8.6 s; For power On
Number	16
Number/Number range	0 to 15
Range of values	SFCs 2, 3 and 4: 0 to 32767 hours SFC 101: 0 to 2^31 - 1 hours
Granularity	1 h
retentive	Yes
supported	Yes
to MPI, master	Yes
on MPI, device	Yes
to DP, master	Yes
on DP, device	Yes
in AS, master	Yes
in AS, device	Yes
on Ethernet via NTP	No; Via CP
MPI, max.	200 ms

Interfaces (3)

Interfaces/bus type	1 x MPI/PROFIBUS DP, 1 x PROFIBUS DP
Number of RS 485 interfaces	2; Combined MPI / PROFIBUS DP and PROFIBUS DP
Optical interface	No

1. Interface (57)

Interface type	MPI/PROFIBUS DP
Isolated	Yes
RS 485	Yes
Output current of the interface, max.	150 mA
MPI	Yes
PROFIBUS DP master	Yes
PROFIBUS DP device	Yes
Number of connections	32; If a diagnostics repeater is used on the line, the number of connection resources on the line is reduced by 1
Transmission rate, max.	12 Mbit/s
PG/OP communication	Yes
Routing	Yes
Global data communication	Yes
S7 basic communication	Yes
S7 communication	Yes
S7 communication, as client	Yes
S7 communication, as server	Yes
Number of connections, max.	16; If a diagnostics repeater is used on the line, the number of connection resources on the line is reduced by 1
Transmission rate, max.	12 Mbit/s
max. number of DP devices	32
PG/OP communication	Yes
Routing	Yes; S7 routing
Global data communication	No
S7 basic communication	Yes
S7 communication	Yes
S7 communication, as client	Yes
S7 communication, as server	Yes
Equidistance	Yes
Isochronous mode	Yes
SYNC/FREEZE	Yes
activation/deactivation of DP devices	Yes
Direct data exchange (slave-to-slave communication)	Yes
DPV1	Yes
Inputs, max.	2 kbyte
Outputs, max.	2 kbyte
user data per DP device, max.	244 byte
Inputs, max.	244 byte
Outputs, max.	244 byte
Slots, max.	244
per slot, max.	128 byte
Number of connections	16
GSD file	http://support.automation.siemens.com/WW/view/en/113652
Transmission rate, max.	12 Mbit/s
automatic baud rate search	No
Address area, max.	32; Virtual slots
User data per address area, max.	32 byte
of which consistent, max.	32 byte
PG/OP communication	Yes; with interface active
Routing	Yes; with interface active
Global data communication	No
S7 basic communication	No
S7 communication	Yes
S7 communication, as client	Yes
S7 communication, as server	Yes
Direct data exchange (slave-to-slave communication)	No
DPV1	No
Inputs	244 byte
Outputs	244 byte

2. Interface (38)

Interface type	PROFIBUS DP
Isolated	Yes
RS 485	Yes
Output current of the interface, max.	150 mA
PROFIBUS DP master	Yes
PROFIBUS DP device	Yes
Number of connections, max.	16
Transmission rate, max.	12 Mbit/s
max. number of DP devices	96
PG/OP communication	Yes
Routing	Yes; S7 routing
Global data communication	No
S7 basic communication	Yes
S7 communication	Yes
S7 communication, as client	Yes
S7 communication, as server	Yes
Equidistance	Yes
Isochronous mode	Yes
SYNC/FREEZE	Yes
activation/deactivation of DP devices	Yes
Direct data exchange (slave-to-slave communication)	Yes
DPV1	Yes
Inputs, max.	6 kbyte
Outputs, max.	6 kbyte
user data per DP device, max.	244 byte
Inputs, max.	244 byte
Outputs, max.	244 byte
Slots, max.	244
per slot, max.	128 byte
Number of connections	16
GSD file	http://support.automation.siemens.com/WW/view/en/113652
Transmission rate, max.	12 Mbit/s
Address area, max.	32
User data per address area, max.	32 byte
of which consistent, max.	32 byte
Routing	Yes
Inputs	244 byte
Outputs	244 byte

Protocols (4)

S7 routing	Yes
ISO-on-TCP (RFC1006)	Via CP 443-1 and loadable FB
Data length, max.	1 452 bytes via CP 443-1 Adv.
supported	No

Isochronous mode (6)

Equidistance	Yes
Number of DP masters with isochronous mode	2
User data per isochronous slave, max.	244 byte
payload per isochronous device, max.	244 byte
shortest clock pulse	1 ms; 0.5 ms without use of SFC 126, 127
max. cycle	32 ms

Communication functions (40)

PG/OP communication	Yes
Number of connectable OPs with message processing	31; When using Alarm_S/SQ and Alarm_D/DQ
Number of connectable OPs without message processing	31
Data record routing	Yes
supported	Yes
Number of GD loops, max.	8
Number of GD packets, transmitter, max.	8
Number of GD packets, receiver, max.	16
Size of GD packets, max.	54 byte
Size of GD packet (of which consistent), max.	1 variable
supported	Yes
User data per job, max.	76 byte
User data per job (of which consistent), max.	1 variable
supported	Yes
as server	Yes
as client	Yes
User data per job, max.	64 kbyte
User data per job (of which consistent), max.	462 byte; 1 variable
supported	Yes; Via FC AG_SEND and AG_RECV, max. via 10 CP 443-1 or 443-5
User data per job, max.	8 kbyte
User data per job (of which consistent), max.	240 byte
Number of simultaneous AG-SEND/AG-RECV orders per CPU, max.	24/24
supported	Yes; Via CP and loadable FB
overall	32
overall	32
usable for PG communication	31
reserved for PG communication	1
adjustable for PG communication, max.	0
usable for OP communication	31
reserved for OP communication	1
adjustable for OP communication, max.	0
usable for S7 basic communication	30
reserved for S7 basic communication	0
adjustable for S7 basic communication, max.	0
usable for S7 communication	30
reserved for S7 communication	0
adjustable for S7 communication, max.	0
usable for routing	15
reserved for routing	0
adjustable for routing, max.	0

S7 message functions (17)

Number of login stations for message functions, max.	31; Max. 31 with Alarm_S/SQ and Alarm_D/DQ (OPs); max. 8 with Alarm_8 and Alarm_P (e.g. WinCC)
Symbol-related messages	Yes
SCAN procedure	Yes
Program alarms	Yes
Process diagnostic messages	Yes
simultaneously active Alarm_S blocks, max.	400; Simultaneously active alarm_S/SQ blocks or alarm_D/DQ blocks
Alarm 8-blocks	Yes
Number of instances for alarm 8 and S7 communication blocks, max.	1 200
preset, max.	300
Process control messages	Yes
Number of archives that can log on simultaneously (SFB 37 AR_SEND)	16
overall, max.	512
in 100 ms grid, max.	128
in 500 ms grid, max.	256
in 1000 ms grid, max.	512
with 100 ms grid, max.	1
with 500, 1000 ms grid, max.	10

Test commissioning functions (14)

Status block	Yes; Up to 2 simultaneously
Single step	Yes
Number of breakpoints	4
Status/control variable	Yes; Up to 16 variable tables
Variables	Inputs/outputs, memory bits, DBs, distributed I/Os, timers, counters
Number of variables, max.	70; Status/control
Forcing	Yes
Forcing, variables	Inputs, outputs, bit memories, peripheral inputs, peripheral outputs
Number of variables, max.	256
present	Yes
Number of entries, max.	400
can be set	Yes
preset	120
Can be read out	Yes

Standards, approvals, certificates (9)

CE mark	Yes
CSA approval	Yes
UL approval	Yes
cULus	Yes
FM approval	Yes
RCM (formerly C-TICK)	Yes
KC approval	Yes
EAC (formerly Gost-R)	Yes
ATEX	ATEX II 3G Ex nA IIC T4 Gc

Ambient conditions (2)

min.	0 °C
max.	60 °C

Configuration (26)

STEP 7	Yes
Command set	see instruction list
Nesting levels	7
Access to consistent data in process image	Yes
System functions (SFC)	see instruction list
System function blocks (SFB)	see instruction list
LAD	Yes
FBD	Yes
STL	Yes
SCL	Yes
CFC	Yes
GRAPH	Yes
HiGraph®	Yes
DPSYC_FR	2; SFC 11; per interface
D_ACT_DP	8; SFC 12; per interface
RD_REC	8; SFC 59; per interface
WR_REC	8; SFC 58; per interface
WR_PARM	8; SFC 55; per interface
PARM_MOD	1; SFC 57; per interface
WR_DPARM	2; SFC 56; per interface
DPNRM_DG	8; SFC 13; per interface
RDSYSST	8
DP_TOPOL	1; SFC 103; per interface
RDREC	8; SFB 52; per interface, but not more than 32 across all external interfaces
WRREC	8; SFB 53; per interface, but not more than 32 across all external interfaces
User program protection/password protection	Yes

Dimensions (3)

Width	25 mm
Height	290 mm
Depth	219 mm

Weights (1)

Weight, approx.

700 g

Classifications (14)

eClass	16
eClass	14
eClass	12
eClass	9.1
eClass	9
eClass	8
eClass	7.1
eClass	6
ETIM	10
ETIM	9
ETIM	8
ETIM	7
IDEA	4
UNSPSC	15

Approvals / Certificates (2)

General Product Approval	EMV
Manufacturer Declaration
For use in hazardous locations	Maritime application

Câu hỏi thường gặp về 6ES7414-2XK05-0AB0

6ES7414-2XK05-0AB0 đã ngừng sản xuất chưa, mã thay thế là gì?

6ES7414-2XK05-0AB0 đã ngừng sản xuất (PM410 từ 01/12/2016). Siemens chỉ còn cung cấp mã này dưới dạng phụ tùng thay thế đến 01/10/2028. Fast Group cung ứng từ nguồn hàng còn lại hoặc mã kế nhiệm tương thích. Gửi RFQ để kiểm tra phương án thay thế phù hợp.

Yêu cầu báo giá 6ES7414-2XK05-0AB0 cần những thông tin gì?

Mã đầy đủ, số lượng, thời hạn cần hàng, địa điểm giao và yêu cầu chứng từ. Ghi rõ cấu hình đơn hay dự phòng H và phiên bản firmware CPU.

Yêu cầu báo giá

Thiết bị đang vận hành đã ngừng sản xuất: Quý khách vui lòng gửi ảnh nhãn hoặc mã đầy đủ để Fast Group xác nhận nguồn hàng và phương án thay thế.

Siemens 6ES7414-2XK05-0AB0 – CPU PLC