Siemens 6ES7410-5HX08-0AB0 là CPU PLC thuộc dòng SIMATIC S7-400. Mô tả đặt hàng theo Siemens: SIMATIC CPU 410-5H Process Automation, central unit for S7-400 and S7-400H/F/FH; 5 interfaces: 2x PN, 1x DP, 2x for sync modules; for use as spare part; without System Expansion Card. Thông số nổi bật của 6ES7410-5HX08-0AB0: Bộ nhớ chương trình: 32 MB; max., dependent on the System Expansion Card used; Số cổng PROFINET: 2; Tốc độ truyền: 12 Mbit/s; Phiên bản firmware: V8.3.
Tên gọi khác: PLC CPU; bộ xử lý PLC.
Thông số nổi bật 6ES7410-5HX08-0AB0
Bộ nhớ chương trình32 MB; max., dependent on the System Expansion Card used
Số cổng PROFINET2
Tốc độ truyền12 Mbit/s
Phiên bản firmwareV8.3
Tổn hao công suất10 W
Kiểu sản phẩmCPU 410-5H
Kích thước (R×C×S)50 mm x 290 mm x 219 mm
Tóm tắt nhanh
Mã đặt hàng (MLFB)6ES7410-5HX08-0AB0
Cách viết khác6ES7 410-5HX08-0AB0, 6ES74105HX080AB0
Dòng sản phẩmSIMATIC S7-400
Loại thiết bịCPU PLC
Mô tả SiemensSIMATIC CPU 410-5H Process Automation, central unit for S7-400 and S7-400H/F/FH; 5 interfaces: 2x PN, 1x DP, 2x for sync modules; for use as spare part; without System Expansion Card
Trạng thái vòng đờiĐang cung cấp P.M300 since 2013-06-14
Xuất kho tiêu chuẩn (Siemens)20 ngày
Khối lượng tịnh1.465 kg
Xuất xứĐức
Mã HS85371091
EAN4019169312509
Trạng thái vòng đời và mã thay thế
6ES7410-5HX08-0AB0 đang được Siemens sản xuất và cung cấp bình thường (PM300 từ 14/06/2013). Trạng thái kiểm tra trên SiePortal ngày 23/09/2026; xem thêm hàng Siemens ngừng sản xuất và mã thay thế.
So sánh 6ES7410-5HX08-0AB0 với các mã cùng dòng SIMATIC S7-400
| Mã | Mô tả | Thông số chính | Trạng thái |
|---|
| 6ES7400-1TA11-0AA0 | UR1 | UR1 | Đang cung cấp |
| 6ES7405-0KA02-0AA0 | Power supply PS405, wide range 10 A, 24/48/60 V DC; 5… | Power supply PS405, wide range 10 A, 24/48/60 V… | Đang cung cấp |
| 6ES7407-0KR02-0AA0 | Power supply PS407; 10 A, wide range, UC 120/230V | Power supply PS407; 10 A, wide range, UC 120/230V | Đang cung cấp |
| 6ES7410-5HX08-0AB0 (đang xem) | CPU 410-5H | Bộ nhớ chương trình: 32 MB; max., dependent on the System Expansion Card used; Số cổng PROFINET: 2 | Đang cung cấp |
| 6ES7412-5HK06-0AB0 | CPU 412-5H PN/DP | Bộ nhớ chương trình: 1 MB; Điện áp nguồn: Power supply via system power supply | Đang cung cấp |
| 6ES7414-2XK05-0AB0 | CPU 414-2 | Bộ nhớ chương trình: 1 MB; Điện áp nguồn: Power supply via system power supply | Ngừng sản xuất |
| 6ES7414-2XL07-0AB0 | CPU 414-2 | Bộ nhớ chương trình: 2 MB; Điện áp nguồn: Power supply via system power supply | Đang cung cấp |
| 6ES7414-3XM07-0AB0 | CPU 414-3 | Bộ nhớ chương trình: 4 MB; Điện áp nguồn: Power supply via system power supply | Đang cung cấp |
Cung ứng 6ES7410-5HX08-0AB0 tại Fast Group
Fast Group – đại lý cung cấp thiết bị Siemens chính hãng – cung ứng 6ES7410-5HX08-0AB0 với các hạng mục:
- Xác nhận 6ES7410-5HX08-0AB0 theo nhãn thiết bị hiện hữu, bao gồm phiên bản firmware.
- Theo SiePortal, thời gian xuất kho tiêu chuẩn của Siemens cho 6ES7410-5HX08-0AB0 là 20 ngày. Thời gian giao về Việt Nam được xác nhận trong báo giá.
- Hồ sơ CO, CQ, packing list, hóa đơn VAT và tờ khai hải quan theo yêu cầu đơn hàng; giao hàng toàn quốc.
Thông tin cho yêu cầu báo giá 6ES7410-5HX08-0AB0
- Mã MLFB
- số lượng
- hàng mới chính hãng hay surplus
- firmware (CPU/HMI)
- yêu cầu CO/CQ
- thời gian cần hàng
- địa điểm giao hàng
- chấp nhận mã thay thế (Có/Không)
Thông số kỹ thuật 6ES7410-5HX08-0AB0 theo datasheet
Bảng dưới đây trích từ datasheet Siemens (tiếng Anh) để tham khảo khi lập yêu cầu kỹ thuật; thông số cuối cùng được xác nhận khi báo giá. Tải datasheet PDF từ Siemens.
General information (7)
| Product type designation | CPU 410-5H |
| HW functional status | 3 |
| Firmware version | V8.3 |
| Design of PLC basic unit | With Conformal Coating (ISA-S71.04 severity level G1; G2; G3) and operating temperature to 70 °C |
| SysLog | Yes; via TCP; up to 4 receivers can be parameterized; buffer capacity max. 3 200 entries |
| Field interface security | Yes |
| Programming package | from SIMATIC PCS 7 V10.0.1 (HSP 324, 325, 326) |
CiR - Configuration in RUN (2)
| CiR synchronization time, basic load | 60 ms |
| CiR synchronization time, time per I/O byte | 0 µs |
Input current (4)
| from backplane bus 5 V DC, typ. | 2 A |
| from backplane bus 5 V DC, max. | 2.4 A |
| from backplane bus 24 V DC, max. | 150 mA; DP interface |
| from interface 5 V DC, max. | 90 mA; At the DP interface |
Power loss (1)
Processor (1)
| CPU speed | 450 MHz; Multi-processor system |
Storage (9)
| PCS 7 process objects | 100 ... approx. 2 600, adjustable with System Expansion Card |
| integrated | 32 Mbyte; max., dependent on the System Expansion Card used |
| integrated (for program) | Dependent on the System Expansion Card used |
| integrated (for data) | Dependent on the System Expansion Card used |
| expandable | Dependent on the System Expansion Card used |
| integrated RAM, max. | 48 Mbyte |
| expandable RAM | No |
| with battery | Yes; all data |
| without battery | Yes; Program and data of the load memory |
Battery (4)
| Backup current, typ. | 370 µA; Valid up to 40°C |
| Backup current, max. | 2.1 mA |
| Backup time, max. | Dealt with in the module data manual with the secondary conditions and the factors of influence |
| Feeding of external backup voltage to CPU | No |
CPU processing times (6)
| for bit operations, typ. | 7.5 ns |
| for word operations, typ. | 7.5 ns |
| for fixed point arithmetic, typ. | 7.5 ns |
| for floating point arithmetic, typ. | 15 ns |
| average processing time of PCS 7 typicals | 110 µs; with APL Typicals |
| Process tasks, max. | 9; Individually adjustable from 10 ms to 5 s |
CPU-blocks (19)
| Number, max. | 16 000; Number range: 1 to 16 000 (= Instances) |
| Size, max. | 64 kbyte; Dependent on the System Expansion Card used |
| Number, max. | 8 000; Number range: 0 to 7999 |
| Size, max. | 64 kbyte |
| Number, max. | 8 000; Number range: 0 to 7999 |
| Size, max. | 64 kbyte |
| Number, max. | see instruction list |
| Size, max. | 64 kbyte |
| Number of free cycle OBs | 1; OB 1 |
| Number of time alarm OBs | 8; OB 10-17 |
| Number of delay alarm OBs | 4; OB 20-23 |
| Number of cyclic interrupt OBs | 9; OB 30-38 (= Process Tasks) |
| Number of process alarm OBs | 8; OB 40-47 |
| Number of DPV1 alarm OBs | 3; OB 55-57 |
| Number of startup OBs | 2; OB 100, 102 |
| Number of asynchronous error OBs | 9; OB 80-88 |
| Number of synchronous error OBs | 2; OB 121, 122 |
| per priority class | 24 |
| additional within an error OB | 2 |
Counters, timers and their retentivity (6)
| present | Yes |
| Type | SFB |
| Number | Unlimited (limited only by RAM capacity) |
| present | Yes |
| Type | SFB |
| Number | Unlimited (limited only by RAM capacity) |
Data areas and their retentivity (5)
| Retentive data area (incl. timers, counters, flags), max. | Total working and load memory (with backup battery) |
| Size, max. | 16 384 byte |
| Retentivity available | Yes |
| Number of clock memories | 8; in 1 memory byte |
| adjustable, max. | 64 kbyte |
Address area (7)
| Inputs | 16 kbyte; max., dependent on the System Expansion Card used |
| Outputs | 16 kbyte; max., dependent on the System Expansion Card used |
| Inputs, default | 16 kbyte; Dependent on the System Expansion Card used |
| Outputs, default | 16 kbyte; Dependent on the System Expansion Card used |
| consistent data, max. | 244 byte |
| Access to consistent data in process image | Yes |
| Number of subprocess images, max. | 15 |
Hardware configuration (12)
| Number of expansion units, max. | 21; S7-400 expansion devices |
| connectable OPs | 119 |
| Multicomputing | No |
| Number of connectable IMs (total), max. | 6 |
| Number of connectable IM 460s, max. | 6 |
| Number of connectable IM 463s, max. | 4; Single mode only |
| integrated | 1 |
| via CP | 10; CP 443-5 Extended |
| Integrated | 2 |
| Via CP | 0 |
| PROFIBUS and Ethernet CPs | 11; Of which max. 10 CP as DP master |
| required slots | 2 |
Time of day (16)
| Hardware clock (real-time) | Yes |
| retentive and synchronizable | Yes |
| Resolution | 1 ms |
| Deviation per day (buffered), max. | 1.7 s; Power off |
| Deviation per day (unbuffered), max. | 8.6 s; Power on |
| Number | 16 |
| Number/Number range | 0 to 15 |
| Range of values | SFCs 2, 3 and 4: 0 to 32767 hours SFC 101: 0 to 2^31 - 1 hours |
| Granularity | 1 h |
| retentive | Yes |
| supported | Yes |
| to DP, master | Yes |
| on DP, device | Yes |
| in AS, master | Yes |
| in AS, device | Yes |
| on Ethernet via NTP | NTP as client and as server/client via SIMATIC procedure |
Interfaces (3)
| Number of PROFINET interfaces | 2 |
| Number of RS 485 interfaces | 1; PROFIBUS DP |
| Number of other interfaces | 2; 2x synchronization |
1. Interface (30)
| Interface type | RS 485 / PROFIBUS |
| Isolated | Yes |
| Number of connections | 16 |
| Output current of the interface, max. | 150 mA |
| PROFIBUS DP master | Yes |
| PROFIBUS DP device | No |
| Number of connections, max. | 16 |
| Transmission rate, max. | 12 Mbit/s |
| max. number of DP devices | 96 |
| Number of slots per interface, max. | 1 632 |
| PG/OP communication | Yes |
| Routing | Yes; S7 routing |
| Global data communication | No |
| S7 basic communication | No |
| S7 communication | Yes |
| S7 communication, as client | Yes |
| S7 communication, as server | Yes |
| Equidistance | No |
| Isochronous mode | No |
| SYNC/FREEZE | No |
| activation/deactivation of DP devices | Yes; Approved for stand-alone operation only, not in conjunction with CiR (Configuration in Run) |
| Direct data exchange (slave-to-slave communication) | No |
| DPV1 | Yes |
| Inputs, max. | 6 kbyte |
| Outputs, max. | 6 kbyte |
| user data per DP device, max. | 244 byte |
| Inputs, max. | 244 byte |
| Outputs, max. | 244 byte |
| Slots, max. | 244 |
| per slot, max. | 128 byte |
2. Interface (36)
| Interface type | PROFINET |
| Isolated | Yes |
| automatic detection of transmission rate | Yes; Autosensing |
| Autonegotiation | Yes |
| Autocrossing | Yes |
| System redundancy | Yes |
| Redundant subnetworks | Yes |
| Change of IP address at runtime, supported | No |
| Number of connections | 120 |
| Number of ports | 2 |
| integrated switch | Yes |
| PROFINET IO Controller | Yes |
| PROFINET IO Device | No |
| PROFINET CBA | No |
| Open IE communication | Yes |
| Web server | No |
| Media redundancy | Yes |
| Transmission rate, max. | 100 Mbit/s |
| PG/OP communication | Yes |
| S7 communication | Yes |
| Shared device | No; however, usable as part of S7 |
| Prioritized startup | No |
| Number of connectable IO Devices, max. | 250 |
| Number of connectable IO Devices for RT, max. | 250 |
| of which in line, max. | 250 |
| Activation/deactivation of IO Devices | Yes; Approved for stand-alone operation only, not in conjunction with CiR (Configuration in Run) |
| IO Devices changing during operation (partner ports), supported | No |
| Device replacement without swap medium | Yes |
| Send cycles | 250 µs, 500 µs, 1 ms, 2 ms, 4 ms |
| Updating time | 250 µs to 512 ms, minimum value depends on the number of configured user data and the configured single or redundant mode |
| Inputs, max. | 8 kbyte |
| Outputs, max. | 8 kbyte |
| User data consistency, max. | 1 024 byte |
| Number of connections, max. | 118 |
| Local port numbers used at the system end | 0, 20, 21, 25, 102, 135, 161, 34962, 34963, 34964, 65532, 65533, 65534, 65535 |
| Keep-alive function, supported | Yes |
3. Interface (35)
| Interface type | PROFINET |
| Isolated | Yes |
| automatic detection of transmission rate | Yes; Autosensing |
| Autonegotiation | Yes |
| Autocrossing | Yes |
| System redundancy | Yes |
| Redundant subnetworks | Yes |
| Number of connections | 120 |
| Number of ports | 2 |
| integrated switch | Yes |
| PROFINET IO Controller | Yes |
| PROFINET IO device | No |
| PROFINET CBA | No |
| Open IE communication | Yes |
| Web server | No |
| Media redundancy | Yes |
| Transmission rate, max. | 100 Mbit/s |
| PG/OP communication | Yes |
| S7 communication | Yes |
| Shared device | No; however, usable as part of S7 |
| Prioritized startup | No |
| Number of connectable IO Devices, max. | 250 |
| Number of connectable IO Devices for RT, max. | 250 |
| of which in line, max. | 250 |
| Activation/deactivation of IO Devices | Yes; Approved for stand-alone operation only, not in conjunction with CiR (Configuration in Run) |
| IO Devices changing during operation (partner ports), supported | No |
| Device replacement without swap medium | Yes |
| Send cycles | 250 µs, 500 µs, 1 ms, 2 ms, 4 ms |
| Updating time | 250 µs to 512 ms, minimum value depends on the number of configured user data and the configured single or redundant mode |
| Inputs, max. | 8 kbyte |
| Outputs, max. | 8 kbyte |
| User data consistency, max. | 1 024 byte |
| Number of connections, max. | 118 |
| Local port numbers used at the system end | 0, 20, 21, 25, 102, 135, 161, 34962, 34963, 34964, 65532, 65533, 65534, 65535 |
| Keep-alive function, supported | Yes |
4. Interface (2)
| Interface type | Pluggable synchronization submodule (FO) |
| Plug-in interface modules | Synchronization module 6ES7960-1AA06-0XA0, 6ES7960-1AB06-0XA0 or 6ES7960-1AA08-0XA0 |
5. Interface (2)
| Interface type | Pluggable synchronization submodule (FO) |
| Plug-in interface modules | Synchronization module 6ES7960-1AA06-0XA0, 6ES7960-1AB06-0XA0 or 6ES7960-1AA08-0XA0 |
Protocols (20)
| Supports protocol for PROFINET IO | Yes |
| PROFINET CBA | No |
| PROFIsafe | Yes |
| PROFIBUS | Yes |
| AS-Interface | Yes; Via add-on |
| Switchover time on line break, typ. | < 200 ms |
| Number of stations in the ring, max. | 50 |
| S7 routing | Yes |
| TCP/IP | Yes; via integrated PROFINET interface and loadable FBs |
| Number of connections, max. | 118 |
| Data length, max. | 32 kbyte |
| several passive connections per port, supported | Yes |
| ISO-on-TCP (RFC1006) | Yes; Via integrated PROFINET interface or CP 443-1 and loadable FBs |
| Number of connections, max. | 118 |
| Data length, max. | 32 kbyte; 1 452 bytes via CP 443-1 Adv. |
| UDP | Yes; via integrated PROFINET interface and loadable FBs |
| Number of connections, max. | 118 |
| Data length, max. | 1 472 byte |
| Foundation Fieldbus | Yes; via DP/FF Link |
| MODBUS | Yes; Via add-on |
Communication functions (18)
| PG/OP communication | Yes |
| Number of connectable OPs with message processing | 119; When using Alarm_S/SQ and Alarm_D/DQ |
| Number of connectable OPs without message processing | 119 |
| Data record routing | Yes |
| supported | Yes |
| as server | Yes |
| as client | Yes |
| User data per job, max. | 64 kbyte |
| User data per job (of which consistent), max. | 462 byte; 1 variable |
| supported | Yes; via CP and FC AG_SEND and FC AG_RECV |
| User data per job, max. | 8 kbyte |
| User data per job (of which consistent), max. | 240 byte |
| Number of simultaneous AG-SEND/AG-RECV orders per CPU, max. | 64/64 |
| supported | Yes; Via CP and loadable FB |
| overall | 120 |
| overall | 120 |
| usable for PG communication |
| reserved for PG communication | 1 |
| usable for OP communication |
| reserved for OP communication | 1 |
S7 message functions (8)
| Number of login stations for message functions, max. | 119; max. 119 with Alarm_S/SQ and Alarm_D/DQ (OPs); max. 16 with Alarm_8, Alarm_8P, Notify and Notify_8 (e.g. WinCC) |
| Program alarms | Yes |
| Process diagnostic messages | Yes |
| simultaneously active Alarm_S blocks, max. | 1 000; Simultaneously active alarm_S/SQ blocks or alarm_D/DQ blocks |
| Alarm 8-blocks | Yes |
| Number of instances for alarm 8 and S7 communication blocks, max. | 10 000 |
| Process control messages | Yes |
| Number of archives that can log on simultaneously (SFB 37 AR_SEND) | 64 |
Test commissioning functions (9)
| Status block | Yes |
| Single step | Yes |
| Number of breakpoints | 4 |
| Status/control variable | Yes |
| Variables | Inputs/outputs, memory bits, DBs, distributed I/Os, timers, counters |
| Number of variables, max. | 70 |
| present | Yes |
| Number of entries, max. | 3 200 |
| Can be read out | Yes |
Standards, approvals, certificates (11)
| CE mark | Yes |
| UKCA mark | Yes |
| CSA approval | Yes |
| UL approval | Yes |
| cULus | Yes |
| FM approval | Yes |
| RCM (formerly C-TICK) | Yes |
| KC approval | Yes |
| EAC (formerly Gost-R) | Yes |
| CCC | No |
| ATEX | ATEX II 3G Ex ec IIC T4 Gc |
Ambient conditions (4)
| horizontal installation, min. | 0 °C |
| horizontal installation, max. | 70 °C |
| vertical installation, min. | Not permitted |
| vertical installation, max. | Not permitted |
Configuration (19)
| Command set | see instruction list |
| Nesting levels | 7 |
| Access to consistent data in process image | Yes |
| System functions (SFC) | see instruction list |
| System function blocks (SFB) | see instruction list |
| SCL | Yes |
| CFC | Yes |
| RD_REC | 8; SFC 59; per interface |
| WR_REC | 8; SFC 58; per interface |
| WR_PARM | 8; SFC 55; per interface |
| PARM_MOD | 1; SFC 57; per interface |
| WR_DPARM | 2; SFC 56; per interface |
| DPNRM_DG | 8; SFC 13; per interface |
| RDSYSST | 8; SFC 51 |
| DP_TOPOL | 1; SFC 103; per interface |
| RDREC | 8; SFB 52; per interface, but not more than 32 across all external interfaces |
| WRREC | 8; SFB 53; per interface, but not more than 32 across all external interfaces |
| User program protection/password protection | Yes |
| Block encryption | Yes; With S7 block Privacy |
Dimensions (3)
| Width | 50 mm |
| Height | 290 mm |
| Depth | 219 mm |
Weights (1)
Classifications (12)
| eClass | 16 |
| eClass | 14 |
| eClass | 12 |
| eClass | 9.1 |
| eClass | 9 |
| eClass | 8 |
| eClass | 7.1 |
| eClass | 6 |
| ETIM | 10 |
| ETIM | 9 |
| ETIM | 8 |
| ETIM | 7 |
Approvals / Certificates (4)
| General Product Approval | For use in hazardous locations |
| Functional Saftey | Maritime application |
| TUEV | Type Examination Certificate |
| Maritime application | Environment |
Câu hỏi thường gặp về 6ES7410-5HX08-0AB0
6ES7410-5HX08-0AB0 còn được Siemens sản xuất không?
6ES7410-5HX08-0AB0 đang được Siemens sản xuất và cung cấp bình thường (PM300 từ 14/06/2013).
Yêu cầu báo giá 6ES7410-5HX08-0AB0 cần những thông tin gì?
Mã đầy đủ, số lượng, thời hạn cần hàng, địa điểm giao và yêu cầu chứng từ. Ghi rõ cấu hình đơn hay dự phòng H và phiên bản firmware CPU.
Yêu cầu báo giá
Quý khách vui lòng gửi mã 6ES7410-5HX08-0AB0 và số lượng; Fast Group xác nhận nguồn hàng, thời gian giao và phát hành báo giá.
