
6EP3447-8SB00-0AY0 Bộ nguồn Siemens 48 V 20 A
Mã đặt hàng: 6EP3447-8SB00-0AY0
Bộ nguồn Siemens 6EP3447-8SB00-0AY0 (SITOP PSU8200): dòng định mức 20 A, ngõ ra 48 V / 20 A.
- Dòng sản phẩm
- SITOP PSU8200
- Dòng định mức
- 20 A
- Điện áp ra
- 48 V
- Dòng ra
- 20 A
- Khối lượng
- 3.15 kg
- Mã HS
- 85044083
- Hàng Siemens chính hãng
- CO/CQ đầy đủ
- Cấp hàng nhanh
Mã đặt hàng 6EP3447-8SB00-0AY0
| Mã đặt hàng | Mô tả (catalog) | Khối lượng | Tình trạng | Datasheet | Báo giá |
|---|---|---|---|---|---|
| 6EP3447-8SB00-0AY0 | 3.15 kg | Có trong catalog 2026 | PDF ↗ | Báo giá mã này |
Thông số kỹ thuật
Thông số theo catalog Siemens cho mã 6EP3447-8SB00-0AY0 (KT 10.1 SITOP power supply (2024) p.2/68).
Product brand name SITOP PSU8200 SITOP PSU8200
| type of current supply | 48 V/20 A |
|---|---|
| at short-circuit during operation typical | 60 A |
Input
| type of the power supply network | 3-phase AC |
|---|---|
| minimum rated value | 400 V |
| maximum rated value | 500 V |
| initial value | 320 V |
| full-scale value | 575 V |
| wide range input | Yes |
| buffering time for rated value of the output current in the event of | 10 ms |
Power failure minimum
| line frequency | 50 Hz/60 Hz |
|---|---|
| line frequency | 45 ... 65 Hz |
Input current
| at rated input voltage | A 2 A |
|---|---|
| at rated input voltage | A 1.7 A |
| I2t value maximum | 2.24 A²·s |
Output
| voltage curve at output Controlled, isolated | isolated DC voltage |
|---|
Output voltage
| 48 V | V |
|---|---|
| output voltage adjustable | Yes; via potentiometer |
| adjustable output voltage | 46 ... 56 V; max. 960 W |
Relative control precision of the output voltage
| on slow fluctuation of input voltage | 0.1 % |
|---|---|
| on slow fluctuation of ohm loading | 0.2 % |
Residual ripple
| maximum | 100 mV |
|---|
Voltage peak
| maximum | 480 mV |
|---|---|
| display version for | OK Green LED for 48 V OK |
| response delay maximum | 0.1 s |
Voltage increase time of the output voltage
| maximum | 100 ms |
|---|
Output current
| rated value | 20 A |
|---|---|
| rated range | 0 ... 20 A; +60 ... +70 °C: Derating 4%/K |
| 10 A | A |
| supplied active power typical | 960 W |
Duration of overloading capability for excess current
| at short-circuit during operation | 25 ms |
|---|
Constant overload current
| on short-circuiting during the start-up typical | 24 A |
|---|---|
| bridging of equipment | Yes; switchable characteristic |
| number of parallel-switched equipment resources | 2 |
Efficiency
| efficiency in percent | 94 % |
|---|
Power loss [W]
| at rated output voltage for rated value of the output current typical31 W | W |
|---|
Closed-loop control
| relative control precision of the output voltage with rapid fluctuation0.1 % | % |
|---|---|
| of the input voltage by +/- | typical |
| relative control precision of the output voltage load step of resistive | 3 % |
Setting time
| load step | typical 0.2 ms |
|---|---|
| relative control precision of the output voltage at load step of resist | % |
| maximum | 10 ms |
Protection and monitoring
| property of the output short-circuit proof | Yes |
|---|---|
| typical | 22 A |
Overcurrent overload capability
| in | 5 overload capability 150 % Iout rated up to 5 |
|---|
Enduring short circuit current RMS value
| typical | 26 A |
|---|
Safety
| galvanic isolation between input and output | Yes |
|---|---|
| ing to EN | and EN 50178 |
| operating resource protection class | Class I |
Leakage current
| maximum | 1 mA |
|---|---|
| typical | 0.6 mA |
| protection class IP | IP20 |
Certificate of suitability
| CE marking | Yes |
|---|---|
| UL approval | Yes; cULus-Listed (UL 508, CSA C22.2 No. |
| 60950-1, UL | UL 60950-1) |
| CSA approval | Yes; cULus-Listed (UL 508, CSA C22.2 No. |
| EAC approval | Yes |
| Regulatory Compliance Mark (RCM) | Yes |
| NEC | No No |
| SEMI F47 | Yes |
| IECEx | No |
| ATEX | No |
| ULhazloc approval | No |
| cCSAus, | 2 No No |
| FM registration | No |
Type of certification
| CB-certificate | Yes |
|---|
Standards, specifications, approvals marine classification
| shipbuilding approval | Yes |
|---|
Marine classification association
| American Bureau of Shipping Europe Ltd. (ABS) | No |
|---|---|
| French marine classification society (BV) | No |
| Lloyds Register of Shipping (LRS) | No |
Declaration
| Environmental Product Declaration | Yes |
|---|
Global Warming Potential [CO2 eq]
| during manufacturing | 49.6 kg |
|---|---|
| after end of life | 0.71 kg |
Ambient temperature
| during operation | -25 ... +70 °C; With natural convection |
|---|---|
| during transport | -40 ... +85 °C |
| during storage | -40 ... +85 °C |
Type of electrical connection screw terminal screw terminal
| at input L1, L2, L3, PE: | L3, PE: 1 screw terminal each for 0.5 |
|---|---|
| for auxiliary contacts | 13, 14 (alarm signal), 15, 16 (Remote): 1 |
| for | screw terminal each for 0.05 ... 2.5 mm² |
| screw terminal each for | 1.5 mm² |
Mechanical data
| width × height × depth of the enclosure | 135 mm × 150 mm |
|---|---|
| installation width × mounting height | 135 mm |
Required spacing
| top | 40 mm |
|---|---|
| bottom | 40 mm |
| left | 0 mm |
| right | 0 mm |
| standard rail mounting | Yes |
| S7 rail mounting | No |
| wall mounting | No |
| housing can be lined up | Yes |
| net weight | 3.3 kg |
Accessories
| mechanical accessories Device identification label | label 20 mm × 7 mm, TI- |
|---|
Additional information
| ambient temperature | temperature +25 °C (unless other |
|---|
Dòng catalog gốc (in theo catalog)
| Catalog row text | SITOP PSU8200 3-phase, |
|---|
Thông tin thương mại
| Mã HS (CN8) | 85044083 |
|---|---|
| Xuất xứ (theo Siemens) | Romania (RO) |
| Khối lượng tịnh | 3.15 kg |
| UPC | 804766731419 |
| Nguồn catalog | KT 10.1 SITOP power supply (2024) p.2/68 |
Tài liệu
- Data sheet 6EP3447-8SB00-0AY0Datasheet PDF
- SiePortal 6EP3447-8SB00-0AY0Trang sản phẩm SiePortal
- CAx data 6EP3447-8SB00-0AY0 (via SiePortal "Download product images and data for M-CAD and E-CAD")CAD 2D/3D, EPLAN
- KT 10.1 SITOP power supply (2024)Catalog
Tài liệu mở tại website Siemens (SiePortal / Siemens TED).
Model khác: SITOP PSU8200
Hỏi đáp về Siemens 6EP3447-8SB00-0AY0
Siemens 6EP3447-8SB00-0AY0 còn được cung cấp không?
Mã này có trong catalog Siemens hiện hành (KT 10.1 SITOP power supply (2024) p.2/68). Tình trạng giao hàng cụ thể được xác nhận khi báo giá.
Xuất xứ, mã HS và khối lượng của Siemens 6EP3447-8SB00-0AY0?
Xuất xứ theo siemens: romania; mã hs (cn8): 85044083; khối lượng tịnh 3.15 kg (theo dữ liệu Siemens cho mã 6EP3447-8SB00-0AY0; xuất xứ thực tế ghi trên CO của từng lô hàng).
Cần gửi gì để nhận báo giá Siemens 6EP3447-8SB00-0AY0?
Gửi mã đặt hàng (vd 6EP3447-8SB00-0AY0), số lượng, nơi giao và thời điểm cần hàng qua form bên dưới hoặc Zalo (+84) 938 888 958. Fast Group cung cấp hàng Siemens chính hãng, CO/CQ đầy đủ, cấp hàng nhanh; rfq nhận trước 16:00 được phản hồi trong ngày làm việc.