

6EP3446-8SB10-0AY0 Bộ nguồn Siemens 36 V 13 A
Mã đặt hàng: 6EP3446-8SB10-0AY0
Bộ nguồn Siemens 6EP3446-8SB10-0AY0 (SITOP PSU8200): dòng định mức 13 A, ngõ ra 36 V / 13 A.
- Dòng sản phẩm
- SITOP PSU8200
- Dòng định mức
- 13 A
- Điện áp ra
- 36 V
- Dòng ra
- 13 A
- Khối lượng
- 1.1 kg
- Mã HS
- 85044083
- Hàng Siemens chính hãng
- CO/CQ đầy đủ
- Cấp hàng nhanh
Mã đặt hàng 6EP3446-8SB10-0AY0
| Mã đặt hàng | Mô tả (catalog) | Khối lượng | Tình trạng | Datasheet | Báo giá |
|---|---|---|---|---|---|
| 6EP3446-8SB10-0AY0 | Article number | 1.1 kg | Có trong catalog 2026 | PDF ↗ | Báo giá mã này |
Thông số kỹ thuật
Thông số theo catalog Siemens cho mã 6EP3446-8SB10-0AY0 (KT 10.1 SITOP power supply (2024) p.2/65).
Product brand name SITOP PSU8200
| type of current supply | 36 V/13 A |
|---|
Input
| type of the power supply network | 3-phase AC |
|---|---|
| supply voltage at | AC |
| minimum rated value | 400 V |
| maximum rated value | 500 V |
| initial value | 320 V |
| full-scale value | 575 V |
| wide range input | Yes |
| buffering time for rated value of the | 15 ms |
Failure minimum
| operating condition of the mains buf at Vin = | 400 V |
|---|
Fering
| The | 3-phase SITOP PSU8200 are technology power supplies for chal line frequency 50 Hz/60 Hz |
|---|
Lenging solutions. The wide-range input allows a connection to
| line frequency | 47 ... 63 Hz |
|---|
Degree of safety even if there are large voltage fluctuations.
| at rated input voltage | 400 V 1.2 A |
|---|---|
| To further increase | 36 V availability, SITOP power supplies can be |
| combined with redundancy modules. | •at rated input voltage 500 V 1 A |
| Product highlights current limitation of inrush current at | 16 A |
25 °C maximum
| 3-phase, | 36 V DC / 13 A |
|---|---|
| I2t value maximum | 0.8 A²·s |
| Input voltage | 320 … 575 V AC fuse protection type none |
| Up to | 94% efficiency fuse protection type in the feeder Required: 3-pole connected miniature |
| circuit breaker | 6 ... 16 A characteristic |
Selection and ordering data
| voltage curve at output Controlled, isolated | DC voltage |
|---|
A output voltage
| Stabilized power supply | •at output 1 at DC rated value 36 V |
|---|---|
| Input: | 400 ... 500 V 3 AC |
| Output: | 36 V DC/13 A 36 V |
| output voltage adjustable | Yes; via potentiometer |
| adjustable output voltage | 36 ... 42 V; max. 480 W |
Voltage
| SITOP RED1200 redundancy For more information, visit: | •on slow fluctuation of input voltage 0.1 % |
|---|---|
| maximum | 500 ms |
Modules www.siemens.com/sitop-redund
| ancy/mall | •on slow fluctuation of ohm loading 0.2 % |
|---|---|
| maximum | 100 mV |
Voltage peak
| maximum | 200 mV |
|---|---|
| display version for | normal operation Green LED for 36 V OK |
| type of signal at output Relay contact (NO contact, rating | 60 V |
| DC/ | 0.3 A) for 36 V OK |
| behavior of the output voltage when | No overshoot of Vout (soft start) |
Switching on
| response delay maximum | 2.5 s |
|---|
Product brand name SITOP PSU8200 product brand name SITOP PSU8200
| type of current supply | 36 V/13 A type of |
|---|---|
| type of current supply | current supply 36 V/13 A |
| total | 958.4 kg |
| total | security information |
Output current safety
| rated value | 13 A galvanic isolation |
|---|---|
| rated value | between input and Yes |
2%/K galvanic isolation Safety extra low output voltage Vout
| 10.1 … | 19.9 |
|---|---|
| 10.1 … | A |
| operating resource protection class | Class |
| operating resource protection class | I |
| supplied active power typical | 468 |
| supplied active power typical | W |
Short-term overload current
| maximum | 3.5 |
|---|---|
| maximum | mA |
| at short-circuit during operation typ | 39 |
| at short-circuit during operation typ | A |
Standard
| at short-circuit during operation | 25 |
|---|---|
| at short-circuit during operation | ms |
Constant overload current
| on short-circuiting during the start- | 14 |
|---|---|
| on short-circuiting during the start- | A |
Certificate of suitability
| efficiency | •UL approval Yes; cULus-Listed |
|---|---|
| efficiency | (UL 508, CSA C22.2 |
| (CSA C22.2 | No. 60950-1, |
| (CSA C22.2 | UL 60950-1) |
Power loss [W]
| CSA approval | Yes; cULus-Listed (UL |
|---|---|
| CSA approval | 508, CSA C22.2 |
| value of the output current typical (CSA C22.2 | No. 60950-1, |
| value of the output current typical (CSA C22.2 | UL 60950-1) |
Voltage with rapid fluctuation of the
| input voltage by +/- | 15% typical •NEC |
|---|---|
| input voltage by +/- | Class 2 No |
50/100/50 % typical type of certification
| setting time | •CB-certificate |
|---|---|
| setting time | Yes |
Hazardous environments
| load step | 100 to 50% |
|---|---|
| load step | typical 0.2 ms |
Voltage at load step of resistive load
| 10/90/10 % typical | •ATEX |
|---|---|
| 10/90/10 % typical | No |
| load step | 10 to 90% |
| load step | 90 to 10% |
| maximum | 10 |
| maximum | ms |
Protection and monitoring marine classification
| property of the output short-circuit | Yes Marine |
|---|---|
| property of the output short-circuit | classification association |
| teristic | approx. 14 A |
| teristic | or latching shut |
(BV)
| typical | 14 |
|---|---|
| typical | A |
| Det | Norske Veritas |
| Det | (DNV) Yes |
Overcurrent overload capability
| in | normal operation overload capability |
|---|---|
| in | 150 % Iout rated |
Operation of plants, systems,
| after end of life | 0.27 |
|---|---|
| after end of life | kg |
Of-the-art industrial cybersecurity
| during transport | -40 ... |
|---|---|
| during transport | +85 °C |
Nected to an enterprise network or the
| at input L1, L2, L3, PE: | 1 screw terminal each internet if |
|---|---|
| at input L1, L2, L3, PE: | and to the extent such a |
| for | 0.2 ... 4 mm² single-core/finely |
| for | connection is necessary and only |
Information on industrial cybersecur
| (Remote): | 1 screw terminal |
|---|---|
| (Remote): | each for www.siemens.com/cybersecurity- |
Required spacing
| of product versions that are | no |
|---|---|
| of product versions that are | longer |
| top | 50 mm supported, and |
| top | failure to apply the |
Latest updates may increase
| bottom | 50 |
|---|---|
| bottom | mm |
Updates, subscribe to the Siemens
| right | 0 mm Industrial |
|---|---|
| right | Cybersecurity RSS Feed |
35x7.5/15 (V4.7)
| net weight | 1.2 |
|---|---|
| net weight | kg |
Accessories
| mechanical accessories Device identification label | 20 mm |
|---|---|
| mechanical accessories Device identification label | × 7 |
Other information Specifications at rated input voltage
| and ambient temperature | +25 |
|---|---|
| and ambient temperature | °C |
Dòng catalog gốc (in theo catalog)
| Catalog row text | Article number |
|---|
Thông tin thương mại
| Mã HS (CN8) | 85044083 |
|---|---|
| Khối lượng tịnh | 1.1 kg |
| UPC | 804766419423 |
| Nguồn catalog | KT 10.1 SITOP power supply (2024) p.2/65 |
Tài liệu
- Data sheet 6EP3446-8SB10-0AY0Datasheet PDF
- SiePortal 6EP3446-8SB10-0AY0Trang sản phẩm SiePortal
- CAx data 6EP3446-8SB10-0AY0 (via SiePortal "Download product images and data for M-CAD and E-CAD")CAD 2D/3D, EPLAN
- IC 10 2018 Power supply (old edition) (2018)Catalog
- KT 10.1 SITOP power supply (2024)Catalog
Tài liệu mở tại website Siemens (SiePortal / Siemens TED).
Model khác: SITOP PSU8200
Hỏi đáp về Siemens 6EP3446-8SB10-0AY0
Siemens 6EP3446-8SB10-0AY0 còn được cung cấp không?
Mã này có trong catalog Siemens hiện hành (KT 10.1 SITOP power supply (2024) p.2/65). Tình trạng giao hàng cụ thể được xác nhận khi báo giá.
Xuất xứ, mã HS và khối lượng của Siemens 6EP3446-8SB10-0AY0?
Mã hs (cn8): 85044083; khối lượng tịnh 1.1 kg (theo dữ liệu Siemens cho mã 6EP3446-8SB10-0AY0; xuất xứ thực tế ghi trên CO của từng lô hàng).
Cần gửi gì để nhận báo giá Siemens 6EP3446-8SB10-0AY0?
Gửi mã đặt hàng (vd 6EP3446-8SB10-0AY0), số lượng, nơi giao và thời điểm cần hàng qua form bên dưới hoặc Zalo (+84) 938 888 958. Fast Group cung cấp hàng Siemens chính hãng, CO/CQ đầy đủ, cấp hàng nhanh; rfq nhận trước 16:00 được phản hồi trong ngày làm việc.