



6EP1332-1SH71 Bộ nguồn Siemens 24 V 2.5 A
Mã đặt hàng: 6EP1332-1SH71
Bộ nguồn Siemens 6EP1332-1SH71 (SITOP – 1-phase, 24 V DC): dòng định mức 2.5 A, ngõ ra 24 V / 2.5 A.
Trang chi tiết mã này (EAN, vòng đời PM, kích thước) có tại portal Siemens Việt Nam: 6EP1332-1SH71.
- Dòng sản phẩm
- SITOP – 1-phase, 24 V DC (for S7-1200)
- Dòng định mức
- 2.5 A
- Điện áp ra
- 24 V
- Dòng ra
- 2.5 A
- Khối lượng
- 0.3 kg
- Mã HS
- 85044083
- Hàng Siemens chính hãng
- CO/CQ đầy đủ
- Cấp hàng nhanh
Mã đặt hàng 6EP1332-1SH71
| Mã đặt hàng | Mô tả (catalog) | Khối lượng | Tình trạng | Datasheet | Báo giá |
|---|---|---|---|---|---|
| 6EP1332-1SH71 | •For use in Zone 2 hazardous environments (gases, vapors or mists) / residual ripple / •maximum 150 mV, catalo | 0.3 kg | Có trong catalog 2026 | PDF ↗ | Báo giá mã này |
Thông số kỹ thuật
Thông số theo catalog Siemens cho mã 6EP1332-1SH71 (KT 10.1 SITOP power supply (2024) p.5/10).
Product brand name S7-1200 PM1207
| type of current supply | 24 V/2.5 A |
|---|
Input
| type of the power supply network | 1-phase AC |
|---|---|
| supply voltage at | AC Automatic range selection |
| supply voltage | 120 V/230 V |
| input voltage | 1 at AC 85 ... 132 V |
| input voltage | 2 at AC 176 ... 264 V |
| wide range input | No |
| overvoltage overload capability | 2.3 × Vin rated, 1.3 ms |
| buffering time for rated value of the | 20 ms |
Failure minimum
| operating condition of the mains buf at Vin = | 93/187 V |
|---|
Fering
| line frequency | 50 Hz/60 Hz |
|---|---|
| line frequency | 47 ... 63 Hz |
| In terms of design and functionality, the SIMATIC PM | 1207 single- input current |
Phase load power supply (PM = power module) with automatic
| at rated input voltage | 120 V 1.2 A |
|---|
Range selection of the input voltage is an optimal match to the
| SIMATIC S7-1200 PLC. It provides the supply to CPUs with | 24 V input •at rated input voltage 230 V 0.67 A |
|---|---|
| as well as to signal modules, and to | 24 V loads connected to the current limitation of inrush current at 13 A |
| modules. Comprehensive certifications such as UL and DNV GL | 25 °C maximum |
25 °C
| Design | •maximum 3 ms |
|---|---|
| I2t value maximum | 0.5 A²·s |
•The load current supplies are directly fastened to the S7-1200
| mounting rail (without connection to the backplane bus) and can fuse protection type T | 3,15 A/250 V (not accessible) |
|---|---|
| ance required) breaker: | 16 A characteristic B or 10 A |
•LED for status indicator "24 V OK" output
| Two | 24 V DC output terminals for connection of 24 V consumers voltage curve at output Controlled, isolated DC voltage |
|---|---|
| output voltage at | DC rated value 24 V |
Function output voltage
| at output | 1 at DC rated value 24 V |
|---|---|
| Connection to all | 1-phase networks (120 V AC/230 V AC) through |
Automatic range switching
| output voltage adjustable | No; - |
|---|
•Parallel connection of two load current supplies for enhanced per
| formance | •on slow fluctuation of input voltage 0.1 % |
|---|---|
| on slow fluctuation of ohm loading | 0.2 % |
| For use in Zone | 2 hazardous environments (gases, vapors or mists) |
Residual ripple
| maximum | 150 mV |
|---|
Voltage peak
| Input: | 120/230 V AC display version for normal operation Green LED for 24 V OK |
|---|---|
| Output: | 24 V DC/2.5 A |
| behavior of the output voltage when | No overshoot of Vout (soft start) |
Switching on
| response delay maximum | 6 s; 2 s at 230 V, 6 s at 120 V |
|---|
Voltage
| typical | 10 ms |
|---|
Output current
| rated value | 2.5 A |
|---|
Product brand name S7-1200 PM1207 product brand name S7-1200 PM1207
| type of current supply | 24 V/2.5 A type of |
|---|---|
| type of current supply | current supply 24 V/2.5 A |
2.5 A certificate of suitability
| short-term overload current | •UL approval Yes; cULus-Listed |
|---|---|
| short-term overload current | (UL 508, CSA C22.2 |
| No. | 107.1), File |
| No. | E197259; cURus- |
| on short-circuiting during the start- | 6 |
| on short-circuiting during the start- | A |
Up typical
| at short-circuit during operation typ | 6 |
|---|---|
| at short-circuit during operation typ | A |
| CSA approval | Yes; cULus-Listed (UL |
| CSA approval | 508, CSA C22.2 |
Ical
| excess current | No. 60950-1) |
|---|---|
| excess current | File E151273 |
Type of certification
| ment resources MTBF at | 40 °C 1 |
|---|---|
| ment resources MTBF at | 492 537 h |
Efficiency standards, specifications, approvals
| efficiency in percent | 83 % |
|---|---|
| efficiency in percent | hazardous environments |
Voltage with rapid fluctuation of the
| input voltage by +/- | 15% typical •FM registration Yes; Class |
|---|---|
| input voltage by +/- | I, Div. 2, Group ABCD, T4 |
Marine classification association
| load step | 50 to 100% |
|---|---|
| load step | typical 5 ms |
•American Bureau of Shipping EuropeYes
| load step | 100 to 50% typical |
|---|---|
| load step | 5 ms Ltd. (ABS) |
| design of the overvoltage protection < | 33 V •Lloyds Register |
| design of the overvoltage protection < | of Shipping (LRS) Yes |
| property of the output short-circuit | Yes •Nippon Kaiji |
| property of the output short-circuit | Kyokai (NK) Yes |
Ambient temperature
| typical | 2.65 |
|---|---|
| typical | A |
Enduring short circuit current RMS
| value | •during transport -40 |
|---|---|
| value | ... +85 °C |
| typical | 2.7 A •during storage |
| typical | -40 ... +85 °C |
| safety environmental category according to Climate class | 3K3, 5 ... |
| safety environmental category according to Climate class | 95% no con |
| IEC | 60721 |
| IEC | densation |
Output connection method
| leakage current | •at output L+, M: 2 |
|---|---|
| leakage current | screw terminals each for 0.5 |
| ... | 2.5 |
| ... | mm² |
| maximum | 3.5 |
| maximum | mA |
Required spacing
| top | 20 mm |
|---|---|
| bottom | 20 mm |
| left | 0 mm |
| right | 0 mm |
| fastening method Snaps onto DIN rail EN | 60715 |
35x7.5/15, wall mounting
| standard rail mounting | Yes |
|---|---|
| S7 rail mounting | No |
| wall mounting | Yes |
| housing can be lined up | Yes |
| net weight | 0.3 kg |
Other information Specifications at rated input voltage
| and ambient temperature | +25 °C |
|---|
Latest product versions are used. Use
| of product versions that are | no longer |
|---|
Dòng catalog gốc (in theo catalog)
| Catalog row values (as printed) | SIMATIC | S7-1200 | PM | 1207 |
|---|
Thông tin thương mại
| Mã HS (CN8) | 85044083 |
|---|---|
| Khối lượng tịnh | 0.3 kg |
| UPC | 040892549553 |
| Nguồn catalog | KT 10.1 SITOP power supply (2024) p.5/10 |
Tài liệu
- Data sheet 6EP1332-1SH71Datasheet PDF
- SiePortal 6EP1332-1SH71Trang sản phẩm SiePortal
- CAx data 6EP1332-1SH71 (via SiePortal "Download product images and data for M-CAD and E-CAD")CAD 2D/3D, EPLAN
- KT 10.1 SITOP power supply (2024)Catalog
Tài liệu mở tại website Siemens (SiePortal / Siemens TED).
Hỏi đáp về Siemens 6EP1332-1SH71
Siemens 6EP1332-1SH71 còn được cung cấp không?
Mã này có trong catalog Siemens hiện hành (KT 10.1 SITOP power supply (2024) p.5/10). Tình trạng giao hàng cụ thể được xác nhận khi báo giá.
Xuất xứ, mã HS và khối lượng của Siemens 6EP1332-1SH71?
Mã hs (cn8): 85044083; khối lượng tịnh 0.3 kg (theo dữ liệu Siemens cho mã 6EP1332-1SH71; xuất xứ thực tế ghi trên CO của từng lô hàng).
Cần gửi gì để nhận báo giá Siemens 6EP1332-1SH71?
Gửi mã đặt hàng (vd 6EP1332-1SH71), số lượng, nơi giao và thời điểm cần hàng qua form bên dưới hoặc Zalo (+84) 938 888 958. Fast Group cung cấp hàng Siemens chính hãng, CO/CQ đầy đủ, cấp hàng nhanh; rfq nhận trước 16:00 được phản hồi trong ngày làm việc.