Siemens 6ES7515-2FN03-0AB0 là CPU PLC thuộc dòng SIMATIC S7-1500. Mô tả đặt hàng theo Siemens: SIMATIC S7-1500F, CPU 1515F-2 PN, central processing unit with 1.5 MB work memory for program and 4.5 MB for data, 1st interface: PROFINET IRT with 2-port switch, 2nd interface: PROFINET RT, 6 ns bit performance, SIMATIC Memory Card required - - approvals and certificates according to entry 109817466 at support.industry.siemens.com to be considered! - -. Thông số nổi bật của 6ES7515-2FN03-0AB0: Bộ nhớ chương trình: 1.5 MB; Số cổng PROFINET: 2; Điện áp nguồn: 24 V; Phiên bản firmware: V4.1.
Thông số nổi bật 6ES7515-2FN03-0AB0
Bộ nhớ chương trình1.5 MB
Số cổng PROFINET2
Điện áp nguồn24 V
Phiên bản firmwareV4.1
Tổn hao công suất3.6 W
Kiểu sản phẩmCPU 1515F-2 PN
Kích thước (R×C×S)70 mm x 147 mm x 129 mm
Tóm tắt nhanh
Mã đặt hàng (MLFB)6ES7515-2FN03-0AB0
Cách viết khác6ES7 515-2FN03-0AB0, 6ES75152FN030AB0
Dòng sản phẩmSIMATIC S7-1500
Loại thiết bịCPU PLC
Mô tả SiemensSIMATIC S7-1500F, CPU 1515F-2 PN, central processing unit with 1.5 MB work memory for program and 4.5 MB for data, 1st interface: PROFINET IRT with 2-port switch, 2nd interface: PROFINET RT, 6 ns bit performance, SIMATIC Memory Card required - - approvals and certificates according to entry 109817466 at support.industry.siemens.com to be considered! - -
Trạng thái vòng đờiĐang cung cấp P.M300 since 2023-03-01
Xuất kho tiêu chuẩn (Siemens)1 ngày
Thay thế cho mã cũ6ES7515-2FM02-0AB0
Khối lượng tịnh0.511 kg
Xuất xứĐức
Mã HS85371091
EAN4047623412403
Đơn vị nhập khẩu thiết bị Siemens uy tín cho S7-1500
Theo dữ liệu Siemens, 6ES7515-2FN03-0AB0 có mã HS 85371091 và xuất xứ Đức. Fast Group nhập khẩu chính ngạch và khai báo hải quan đúng mã HS, nên khách hàng nhận đủ tờ khai, hóa đơn VAT và CO/CQ để quyết toán và nghiệm thu. Xem thêm: đơn vị nhập khẩu thiết bị Siemens uy tín.
Trạng thái vòng đời và mã thay thế
6ES7515-2FN03-0AB0 đang được Siemens sản xuất và cung cấp bình thường (PM300 từ 01/03/2023). Trạng thái kiểm tra trên SiePortal ngày 23/09/2026; xem thêm hàng Siemens ngừng sản xuất và mã thay thế.
So sánh 6ES7515-2FN03-0AB0 với các mã cùng dòng SIMATIC S7-1500
Bảng giúp chọn đúng mã trong cùng dòng trước khi gửi RFQ; bấm vào mã để xem chi tiết.
| Mã | Mô tả | Thông số chính | Trạng thái |
|---|---|---|---|
| 6ES7515-2AM02-0AB0 | CPU 1515-2 PN | Bộ nhớ chương trình: 500 KB; Số cổng PROFINET: 2 | Ngừng sản xuất |
| 6ES7515-2AN03-0AB0 | CPU 1515-2 PN | Bộ nhớ chương trình: 1 MB; Số cổng PROFINET: 2 | Đang cung cấp |
| 6ES7515-2FM02-0AB0 | CPU 1515F-2 PN | Bộ nhớ chương trình: 750 KB; Số cổng PROFINET: 2 | Ngừng sản xuất |
| 6ES7515-2FN03-0AB0 (đang xem) | CPU 1515F-2 PN | Bộ nhớ chương trình: 1.5 MB; Số cổng PROFINET: 2 | Đang cung cấp |
| 6ES7516-3AN02-0AB0 | CPU 1516-3 PN/DP | Bộ nhớ chương trình: 1 MB; Số cổng PROFINET: 2 | Ngừng sản xuất |
| 6ES7516-3AP03-0AB0 | CPU 1516-3 PN/DP | Bộ nhớ chương trình: 2 MB; Số cổng PROFINET: 2 | Đang cung cấp |
| 6ES7516-3FN02-0AB0 | CPU 1516F-3 PN/DP | Bộ nhớ chương trình: 1.5 MB; Số cổng PROFINET: 2 | Ngừng sản xuất |
| 6ES7516-3FP03-0AB0 | CPU 1516F-3 PN/DP | Bộ nhớ chương trình: 3 MB; Số cổng PROFINET: 2 | Đang cung cấp |
Giao nhanh 6ES7515-2FN03-0AB0: thời gian xuất kho Siemens 1 ngày
Theo SiePortal, thời gian xuất kho tiêu chuẩn của Siemens cho 6ES7515-2FN03-0AB0 là 1 ngày. Cộng thêm vận chuyển quốc tế và thông quan, Fast Group ghi rõ tổng thời gian giao 6ES7515-2FN03-0AB0 trong báo giá. Với hạng mục gấp, chúng tôi đề xuất vận chuyển hàng không hoặc mã tương đương giao được sớm hơn. Xem thêm: cách rút ngắn thời gian giao hàng Siemens.
Thông tin cần có khi gửi RFQ 6ES7515-2FN03-0AB0
Ứng dụng tiêu biểu của S7-1500: nhà máy lọc hóa dầu, điện, xi măng, thực phẩm – đồ uống, hệ điều khiển trạm và dây chuyền sản xuất lớn. Để báo giá nhanh, vui lòng gửi:
- Mã MLFB
- số lượng
- hàng mới chính hãng hay surplus
- firmware (CPU/HMI)
- yêu cầu CO/CQ
- thời gian cần hàng
- địa điểm giao hàng
- chấp nhận mã thay thế (Có/Không)
- Nêu phiên bản firmware CPU và phiên bản TIA Portal đang dùng.
- Với F-CPU, xác nhận yêu cầu SIL/PL và module F-I/O đi kèm.
Thông số kỹ thuật 6ES7515-2FN03-0AB0 theo datasheet
Bảng dưới đây trích từ datasheet Siemens (tiếng Anh) để tham khảo khi lập yêu cầu kỹ thuật; thông số cuối cùng được xác nhận khi báo giá. Tải datasheet PDF từ Siemens.
General information (8)
| Product type designation | CPU 1515F-2 PN |
| HW functional status | FS04 |
| Firmware version | V4.1 |
| FW update possible | Yes |
| I&M data | Yes; I&M0 to I&M3 |
| Isochronous mode | Yes; Distributed and central; with minimum OB 6x cycle of 375 µs (distributed) and 1 ms (central) |
| SysLog | Yes |
| STEP 7 TIA Portal configurable/integrated from version | V21 (FW V4.1) / V18 (FW V3.0) or higher; configurable with older TIA Portal versions as 6ES7515-2FM02-0AB0 |
Configuration control (1)
| via dataset | Yes |
Display (1)
| Screen diagonal [cm] | 6.1 cm |
Control elements (2)
| Number of keys | 8 |
| Mode buttons | 2 |
Supply voltage (6)
| Rated value (DC) | 24 V |
| permissible range, lower limit (DC) | 19.2 V |
| permissible range, upper limit (DC) | 28.8 V |
| Reverse polarity protection | Yes |
| Mains/voltage failure stored energy time | 5 ms |
| Repeat rate, min. | 1/s |
Input current (4)
| Current consumption (rated value) | 0.65 A |
| Current consumption, max. | 1.03 A |
| Inrush current, max. | 1.15 A; Rated value |
| I²t | 0.6 A²·s |
Power (2)
| Infeed power to the backplane bus | 12 W |
| Power consumption from the backplane bus (balanced) | 6.2 W |
Power loss (1)
| Power loss, typ. | 3.6 W |
Storage (6)
| Number of slots for SIMATIC memory card | 1 |
| SIMATIC memory card required | Yes |
| integrated (for program) | 1.5 Mbyte |
| integrated (for data) | 4.5 Mbyte |
| Plug-in (SIMATIC Memory Card), max. | 32 Gbyte |
| maintenance-free | Yes |
CPU processing times (4)
| for bit operations, typ. | 6 ns |
| for word operations, typ. | 7 ns |
| for fixed point arithmetic, typ. | 9 ns |
| for floating point arithmetic, typ. | 37 ns |
CPU-blocks (21)
| Number of elements (total) | 8 000; Blocks (OB, FB, FC, DB) and UDTs |
| Number range | 1 ... 60 999; subdivided into: number range that can be used by the user: 1 ... 59 999, and number range of DBs created via SFC 86: 60 000 ... 60 999 |
| Size, max. | 4.5 Mbyte; For DBs with absolute addressing, the max. size is 64 KB |
| Number range | 0 ... 65 535 |
| Size, max. | 1 Mbyte |
| Number range | 0 ... 65 535 |
| Size, max. | 1 Mbyte |
| Size, max. | 1 Mbyte |
| Number of free cycle OBs | 100 |
| Number of time alarm OBs | 20 |
| Number of delay alarm OBs | 20 |
| Number of cyclic interrupt OBs | 20; With minimum OB 3x cycle of 250 µs |
| Number of process alarm OBs | 50 |
| Number of DPV1 alarm OBs | 3 |
| Number of isochronous mode OBs | 2 |
| Number of technology synchronous alarm OBs | 2 |
| Number of startup OBs | 100 |
| Number of asynchronous error OBs | 4 |
| Number of synchronous error OBs | 2 |
| Number of diagnostic alarm OBs | 1 |
| per priority class | 24; Up to 8 possible for F-blocks |
Counters, timers and their retentivity (8)
| Number | 2 048 |
| adjustable | Yes |
| Number | Any (only limited by the main memory) |
| adjustable | Yes |
| Number | 2 048 |
| adjustable | Yes |
| Number | Any (only limited by the main memory) |
| can be set | Yes |
Data areas and their retentivity (7)
| Retentive data area (incl. timers, counters, flags), max. | 472 kbyte; in total; for bit memories, timers, counters, DBs, and technology data (axes) |
| Extended retentive data area (incl. timers, counters, flags), max. | 4.5 Mbyte; When using PS 6 0W 24/48/60 V DC HF |
| Size, max. | 16 kbyte |
| Number of clock memories | 8; 8 clock memory bit, grouped into one clock memory byte |
| Retentivity adjustable | Yes |
| Retentivity preset | No |
| per priority class, max. | 64 kbyte; max. 16 KB per block |
Address area (8)
| Number of IO modules | 8 192; max. number of modules / submodules |
| Inputs | 32 kbyte; All inputs are in the process image |
| Outputs | 32 kbyte; All outputs are in the process image |
| Inputs (volume) | 8 kbyte |
| Outputs (volume) | 8 kbyte |
| Inputs (volume) | 8 kbyte |
| Outputs (volume) | 8 kbyte |
| Number of subprocess images, max. | 32 |
Hardware configuration (7)
| Number of distributed IO systems | 64; A distributed I/O system is characterized not only by the integration of distributed I/O via PROFINET or PROFIBUS communication modules, but also by the connection of I/O via AS-i master modules or links (e.g. IE/PB-Link) |
| Via CM | 8; A maximum of 8 CMs/CPs (PROFIBUS, PROFINET, Ethernet) can be inserted in total |
| Integrated | 2 |
| via CM | 8; A maximum of 8 CMs/CPs (PROFIBUS, PROFINET, Ethernet) can be inserted in total |
| Modules per rack, max. | 32; CPU + 31 modules |
| Number of lines, max. | 1 |
| Number of PtP CMs | the number of connectable PtP CMs is only limited by the number of available slots |
Time of day (10)
| Type | Hardware clock |
| Backup time | 6 wk; At 40 °C ambient temperature, typically |
| Deviation per day, max. | 10 s; Typ.: 2 s |
| Number | 64 |
| supported | Yes |
| to DP, master | Yes; via PROFIBUS CM / CP |
| on DP, device | Yes; via PROFIBUS CM / CP |
| in AS, master | Yes |
| in AS, device | Yes |
| on Ethernet via NTP | Yes |
Interfaces (1)
| Number of PROFINET interfaces | 2 |
1. Interface (43)
| RJ 45 (Ethernet) | Yes; X1 |
| Number of ports | 2 |
| integrated switch | Yes |
| IP protocol | Yes; IPv4 |
| PROFINET IO Controller | Yes |
| PROFINET IO device | Yes |
| SIMATIC communication | Yes |
| Open IE communication | Yes; Optionally also encrypted |
| Web server | Yes |
| Media redundancy | Yes |
| Isochronous mode | Yes |
| Direct data exchange | Yes; Requirement: IRT and isochronous mode (MRPD optional) |
| IRT | Yes |
| Dynamic Frame Packing (DFP) | Yes |
| PROFIenergy | Yes; per user program |
| Prioritized startup | Yes; Max. 32 PROFINET devices |
| Number of connectable IO Devices, max. | 256; in total, up to 1024 distributed I/O devices can be connected via AS-i, PROFIBUS or PROFINET |
| Of which IO devices with IRT, max. | 64 |
| Number of connectable IO Devices for RT, max. | 256 |
| of which in line, max. | 256 |
| Number of IO Devices that can be simultaneously activated/deactivated, max. | 8; in total across all interfaces |
| Number of IO Devices per tool, max. | 8 |
| Updating times | The minimum value of the update time also depends on communication share set for PROFINET IO, on the number of IO devices, and on the quantity of configured user data |
| for send cycle of 250 µs | 250 μs to 4 ms; Note: In the case of IRT with isochronous mode, the minimum update time of 375 µs of the isochronous OB is decisive |
| for send cycle of 500 µs | 500 µs to 8 ms |
| for send cycle of 1 ms | 1 ms to 16 ms |
| for send cycle of 2 ms | 2 ms to 32 ms |
| for send cycle of 4 ms | 4 ms to 64 ms |
| With IRT and parameterization of "odd" send cycles | Update time = set "odd" send clock (any multiple of 125 µs: 375 µs, 625 µs ... 3 875 µs) |
| for send cycle of 250 µs | 250 µs to 128 ms |
| for send cycle of 500 µs | 500 µs to 256 ms |
| for send cycle of 1 ms | 1 ms to 512 ms |
| for send cycle of 2 ms | 2 ms to 512 ms |
| for send cycle of 4 ms | 4 ms to 512 ms |
| Isochronous mode | No |
| IRT | Yes |
| Dynamic Frame Packing (DFP) | No |
| PROFIenergy | Yes; per user program |
| Prioritized startup | Yes |
| Shared device | Yes |
| Number of IO Controllers with shared device, max. | 4 |
| activation/deactivation of I-devices | Yes; per user program |
| Asset management record | Yes; per user program |
2. Interface (35)
| RJ 45 (Ethernet) | Yes; X2 |
| Number of ports | 1 |
| integrated switch | No |
| IP protocol | Yes; IPv4 |
| PROFINET IO Controller | Yes |
| PROFINET IO Device | Yes |
| SIMATIC communication | Yes |
| Open IE communication | Yes; Optionally also encrypted |
| Web server | Yes |
| Media redundancy | No |
| Isochronous mode | No |
| Direct data exchange | No |
| IRT | No |
| Dynamic Frame Packing (DFP) | No |
| PROFIenergy | Yes; per user program |
| Prioritized startup | No |
| Number of connectable IO Devices, max. | 32; in total, up to 1024 distributed I/O devices can be connected via AS-i, PROFIBUS or PROFINET |
| Number of connectable IO Devices for RT, max. | 32 |
| of which in line, max. | 32 |
| Number of IO Devices that can be simultaneously activated/deactivated, max. | 8; in total across all interfaces |
| IO Devices changing during operation (partner ports), supported | Yes |
| Number of IO Devices per tool, max. | 8 |
| Updating times | The minimum value of the update time also depends on communication share set for PROFINET IO, on the number of IO devices, and on the quantity of configured user data |
| PROFINET Security Class | 1 |
| for send cycle of 1 ms | 1 ms to 512 ms |
| Isochronous mode | No |
| IRT | No |
| Dynamic Frame Packing (DFP) | No |
| PROFIenergy | Yes; per user program |
| Prioritized startup | No |
| Shared device | Yes |
| Number of IO Controllers with shared device, max. | 4 |
| activation/deactivation of I-devices | Yes; per user program |
| Asset management record | Yes; per user program |
| PROFINET Security Class | SNMP Configuration and DCP Read Only |
Interface types (4)
| 100 Mbps | Yes |
| Autonegotiation | Yes |
| Autocrossing | Yes |
| Industrial Ethernet status LED | Yes |
Protocols (74)
| PROFIsafe | Yes; V2.4 / V2.6 |
| Number of connections, max. | 256; via integrated interfaces of the CPU and connected CPs / CMs |
| Number of connections reserved for ES/HMI/web | 10 |
| Number of connections via integrated interfaces | 128 |
| Number of S7 routing paths | 16 |
| PROFINET system redundancy (S2) | No |
| PROFINET system redundancy (R1) | No |
| H-Sync forwarding | Yes |
| Media redundancy | only via 1st interface (X1) |
| MRP | Yes; MRP Automanager according to IEC 62439-2 Edition 2.0, MRP Manager; MRP Client |
| MRP interconnection, supported | Yes; as MRP ring node according to IEC 62439-2 Edition 3.0 |
| MRPD | Yes; Requirement: IRT |
| Switchover time on line break, typ. | 200 ms; For MRP, bumpless for MRPD |
| Number of stations in the ring, max. | 50 |
| PG/OP communication | Yes; encryption with TLS V1.3 pre-selected |
| S7 routing | Yes |
| Data record routing | Yes |
| S7 communication, as server | Yes |
| S7 communication, as client | Yes |
| User data per job, max. | See online help (S7 communication, user data size) |
| TCP/IP | Yes |
| Data length, max. | 64 kbyte |
| several passive connections per port, supported | Yes |
| ISO-on-TCP (RFC1006) | Yes |
| Data length, max. | 64 kbyte |
| UDP | Yes |
| Data length, max. | 2 kbyte; 1 472 bytes for UDP broadcast |
| UDP multicast | Yes; max. 118 multicast circuits |
| DHCP | Yes |
| DNS | Yes |
| SNMP | Yes |
| DCP | Yes |
| LLDP | Yes |
| Encryption | Yes; Optional |
| HTTP | Yes; Standard and user pages |
| HTTPS | Yes; Standard and user pages |
| web API | |
| Number of sessions, max. | 100 |
| number of simultaneous HTTP calls, max. | 4 |
| HTTP request body, max. | 131 072 byte |
| Runtime license required | Yes; "Medium" license required |
| OPC UA Client | Yes; Data Access (registered Read/Write), Method Call |
| Application authentication | Yes |
| Security policies | Available security policies: None, Basic128Rsa15, Basic256Rsa15, Basic256Sha256 |
| User authentication | "anonymous" or by user name & password |
| Number of connections, max. | 10 |
| Number of nodes of the client interfaces, recommended max. | 2 000 |
| Number of elements for one call of OPC_UA_NodeGetHandleList/OPC_UA_ReadList/OPC_UA_WriteList, max. | 300 |
| Number of elements for one call of OPC_UA_NameSpaceGetIndexList, max. | 20 |
| Number of elements for one call of OPC_UA_MethodGetHandleList, max. | 100 |
| Number of simultaneous calls of the client instructions for session management, per connection, max. | 1 |
| Number of simultaneous calls of the client instructions for data access, per connection, max. | 5; for OPC_UA_MethodCall 100 in total (no limit per connection) |
| Number of registerable nodes, max. | 5 000 |
| Number of registerable method calls of OPC_UA_MethodCall, max. | 100 |
| Number of inputs/outputs when calling OPC_UA_MethodCall, max. | 20 |
| OPC UA Server | Yes; data access (read, write, subscribe), method call, alarms & condition (A&C), custom address space, role-based access control |
| Application authentication | Yes |
| Security policies | available security policies: None, Basic128Rsa15, Basic256Rsa15, Basic256Sha256, Aes128Sha256RsaOaep, Aes256Sha256RsaPss |
| User authentication | "anonymous" or by user name & password |
| GDS support (certificate management) | Yes |
| Number of sessions, max. | 48 |
| Number of accessible variables, max. | 100 000 |
| Number of registerable nodes, max. | 20 000 |
| Number of subscriptions per session, max. | 50 |
| Sampling interval, min. | 100 ms |
| Publishing interval, min. | 100 ms |
| Number of server methods, max. | 1 000; max. 50 concurrently running jobs each for asynchronous instructions OPC_UA_ServerMethodPre and OPC_UA_ServerMethodPost |
| Number of inputs/outputs per server method, max. | 20 |
| Number of monitored items, recommended max. | 4 000; for 1 s sampling interval and 1 s send interval |
| Number of server interfaces, max. | 10 of each "Server interfaces" / "Companion specification" type and 20 of the type "Reference namespace" |
| Number of nodes for user-defined server interfaces, max. | 30 000 |
| Alarms and Conditions | Yes |
| Number of program alarms | 200 |
| Number of alarms for system diagnostics | 100 |
| MODBUS | Yes; MODBUS TCP |
S7 message functions (9)
| Number of login stations for message functions, max. | 64 |
| number of subscriptions, max. | 500 |
| number of tags/attributes for subscriptions, max. | 8 000 |
| Program alarms | Yes |
| Number of configurable program messages, max. | 10 000; Program messages are generated by the "Program_Alarm" block, ProDiag or GRAPH |
| Number of loadable program messages in RUN, max. | 10 000 |
| Number of simultaneously active program alarms | |
| Number of program alarms | 1 000 |
| Number of alarms for system diagnostics | 200 |
| Number of alarms for motion technology objects | 160 |
Test commissioning functions (17)
| Joint commission (Team Engineering) | Yes; Parallel online access possible for up to 8 engineering systems |
| Status block | Yes; Up to 8 simultaneously (in total across all ES clients) |
| Single step | No |
| Number of breakpoints | 8 |
| Profiling | Yes |
| Status/control variable | Yes; without fail-safe |
| Variables | inputs/outputs, bit memories, DBs, peripheral I/Os (without fail-safe), times, counters |
| Number of variables, max. | |
| of which status variables, max. | 200; per job |
| of which control variables, max. | 200; per job |
| Forcing | Yes; without fail-safe |
| Forcing, variables | peripheral inputs/outputs (without fail-safe) |
| Number of variables, max. | 200 |
| present | Yes |
| Number of entries, max. | 3 200 |
| of which powerfail-proof | 500 |
| Number of configurable Traces | 4 |
| Memory size per trace, max. | 512 kbyte |
Interrupts/diagnostics/status information (5)
| RUN/STOP LED | Yes |
| ERROR LED | Yes |
| MAINT LED | Yes |
| STOP ACTIVE LED | Yes |
| Connection display LINK TX/RX | Yes |
Supported technology objects (15)
| Motion Control | Yes; Note: The number of technology objects affects the cycle time of the PLC program; selection guide via the TIA Selection Tool |
| Number of available Motion Control resources for technology objects | 2 400 |
| Required Motion Control resources | |
| per speed-controlled axis | 40 |
| per positioning axis | 80 |
| per synchronous axis | 160 |
| per external encoder | 80 |
| per output cam | 20 |
| per cam track | 160 |
| per probe | 40 |
| Positioning axis | |
| Number of positioning axes at motion control cycle of 4 ms (typical value) | 11 |
| Number of positioning axes at motion control cycle of 8 ms (typical value) | 20 |
| Controller | |
| PID_Compact | Yes; Universal PID controller with integrated optimization |
| PID_3Step | Yes; PID controller with integrated optimization for valves |
| PID-Temp | Yes; PID controller with integrated optimization for temperature |
| Counting and measuring | |
| High-speed counter | Yes |
Standards, approvals, certificates (11)
| Siemens Eco Profile (SEP) | Siemens EcoTech |
| Recycler Guide available | Yes |
| environmental product declaration | Yes |
| global warming potential, (total) [CO2 eq] | 100 kg |
| global warming potential, (during production) [CO2 eq] | 25.8 kg |
| global warming potential, (during operation) [CO2 eq] | 75.2 kg |
| global warming potential, (after end of life cycle) [CO2 eq] | -0.83 kg |
| Performance level according to ISO 13849-1 | PLe |
| SIL acc. to IEC 61508 | SIL 3 |
| Low demand mode: PFDavg in accordance with SIL3 | < 2.00E-05 |
| High demand/continuous mode: PFH in accordance with SIL3 | < 1.00E-09 |
Security (4)
| PROFINET Security Class | 1 |
| signed firmware update | Yes |
| Secure Boot | Yes |
| securely removing data | Yes |
Ambient conditions (7)
| horizontal installation, min. | -30 °C; No condensation |
| horizontal installation, max. | 60 °C; Display: 50 °C, at an operating temperature of typically 50 °C, the display is switched off |
| vertical installation, min. | -30 °C; No condensation |
| vertical installation, max. | 40 °C; Display: 40 °C, at an operating temperature of typically 40 °C, the display is switched off |
| min. | -40 °C |
| max. | 70 °C |
| Installation altitude above sea level, max. | 5 000 m; Restrictions for installation altitudes > 2 000 m, see manual |
Configuration (21)
| LAD | Yes; incl. failsafe |
| FBD | Yes; incl. failsafe |
| STL | Yes |
| SCL | Yes |
| CFC | Yes; either CFC or failsafe functionality |
| GRAPH | Yes |
| User program protection/password protection | Yes |
| Copy protection | Yes |
| Block protection | Yes |
| protection of confidential configuration data | Yes |
| Password for display | Yes |
| Protection level: Write protection | Yes |
| Protection level: Read/write protection | Yes |
| Protection level: Write protection for Failsafe | Yes |
| Protection level: Complete protection | Yes |
| User administration | Yes; device-wide and centralized |
| Number of users | 100 |
| Number of groups | 100 |
| Number of roles | 50 |
| lower limit | adjustable minimum cycle time |
| upper limit | adjustable maximum cycle time |
Dimensions (3)
| Width | 70 mm |
| Height | 147 mm |
| Depth | 129 mm |
Weights (1)
| Weight, approx. | 456 g |
Classifications (14)
| eClass | 16 |
| eClass | 14 |
| eClass | 12 |
| eClass | 9.1 |
| eClass | 9 |
| eClass | 8 |
| eClass | 7.1 |
| eClass | 6 |
| ETIM | 10 |
| ETIM | 9 |
| ETIM | 8 |
| ETIM | 7 |
| IDEA | 4 |
| UNSPSC | 15 |
Approvals / Certificates (4)
| FM | |
| For use in hazardous locations | Functional Saftey |
| Miscellaneous | CCC-Ex |
| Functional Saftey | Maritime application |
| TUEV | |
| Maritime application | other |
Câu hỏi thường gặp về 6ES7515-2FN03-0AB0
6ES7515-2FN03-0AB0 được nhập khẩu từ đâu, có tờ khai hải quan không?
6ES7515-2FN03-0AB0 có xuất xứ Đức theo dữ liệu Siemens. Fast Group nhập khẩu chính ngạch và cung cấp tờ khai hải quan, CO, CQ, hóa đơn VAT khi hợp đồng yêu cầu.
Bao lâu thì nhận được 6ES7515-2FN03-0AB0?
Theo SiePortal, thời gian xuất kho tiêu chuẩn của Siemens cho 6ES7515-2FN03-0AB0 là 1 ngày. Tổng thời gian giao đến Việt Nam được ghi rõ trong báo giá; hạng mục gấp có thể đi hàng không.
6ES7515-2FN03-0AB0 còn được Siemens sản xuất không?
6ES7515-2FN03-0AB0 đang được Siemens sản xuất và cung cấp bình thường (PM300 từ 01/03/2023).
Làm sao để nhận báo giá 6ES7515-2FN03-0AB0 nhanh nhất?
Gửi mã 6ES7515-2FN03-0AB0, số lượng, thời gian cần hàng và nơi giao qua email minhduc@fastgroup.vn hoặc Zalo/điện thoại 0938 888 958, hoặc dùng biểu mẫu RFQ trên trang. Đủ thông tin, báo giá được lập trong ngày làm việc.
Nhận báo giá Siemens 6ES7515-2FN03-0AB0
Gửi mã và số lượng qua email minhduc@fastgroup.vn hoặc Zalo/điện thoại (+84) 938 888 958, hoặc gửi RFQ qua biểu mẫu. Nhập khẩu chính ngạch, đủ tờ khai và hóa đơn VAT. Phản hồi trong ngày làm việc.