

6EP7133-6AB00-0BN0 Bộ nguồn Siemens 24 V 5 A
Mã đặt hàng: 6EP7133-6AB00-0BN0
Bộ nguồn Siemens 6EP7133-6AB00-0BN0 (SITOP – 1-phase, 24 V DC): dòng định mức 5 A, ngõ ra 24 V / 5 A.
- Dòng sản phẩm
- SITOP – 1-phase, 24 V DC (for SIMATIC ET 200SP)
- Dòng định mức
- 5 A
- Điện áp ra
- 24 V
- Dòng ra
- 5 A
- Khối lượng
- 0.35 kg
- Mã HS
- 85044083
- Hàng Siemens chính hãng
- CO/CQ đầy đủ
- Cấp hàng nhanh
Mã đặt hàng 6EP7133-6AB00-0BN0
| Mã đặt hàng | Mô tả (catalog) | Khối lượng | Tình trạng | Datasheet | Báo giá |
|---|---|---|---|---|---|
| 6EP7133-6AB00-0BN0 | such as UL or GL, facilitate universal use. Its extremely flat design SIMATIC ET 200SP PS | 0.35 kg | Có trong catalog 2026 | PDF ↗ | Báo giá mã này |
Thông số kỹ thuật
Thông số theo catalog Siemens cho mã 6EP7133-6AB00-0BN0 (KT 10.1 SITOP power supply (2024) p.5/18).
| product brand name SIMATIC ET | 200SP PS SIMATIC |
|---|---|
| type of current supply | 24 V/5 A |
| at short-circuit during operation typical | 15 A |
| NEC | Class 2 |
| standard rail mounting | Yes |
| S7 rail mounting | No |
| wall mounting | No |
| housing can be lined up | Yes |
| net weight | 0.5 kg |
Input
| type of the power supply network | 1-phase AC |
|---|---|
| supply voltage | 120 V/230 V |
| wide range input | No |
| overvoltage overload capability | 2.3 × Vin rated, 1.3 ms |
| buffering time for rated value of the output current in the event of | 20 ms |
Power failure minimum
| line frequency | 50 Hz/60 Hz |
|---|---|
| line frequency | 47 ... 63 Hz |
Input current
| at rated input voltage | 120 V 2.16 |
|---|---|
| at rated input voltage | 230 V 1.22 |
| I2t value maximum | 3.15 A²·s |
| fuse protection type in the feeder recommended LS switch: B/C | 6 A/3 A recommended LS |
Output
| voltage curve at output Controlled, isolated | DC voltage Controlled, |
|---|
Output voltage
| 24 V | 24 |
|---|---|
| output voltage adjustable | Yes; via potentiometer |
| adjustable output voltage | 22.8 ... 28 V |
Relative control precision of the output voltage
| on slow fluctuation of input voltage | 0.1 % |
|---|---|
| on slow fluctuation of ohm loading | 1 % |
Residual ripple
| maximum | 150 mV |
|---|---|
| typical | 50 mV |
Voltage peak
| maximum | 240 mV |
|---|---|
| typical | 150 mV |
| display version for | normal operation Green LED for 24 V |
| 0.3 A) for "24 V OK" | 0.3 A) for |
| behavior of the output voltage when switching on Overshoot of Vout < | 3 % Overshoot of |
| response delay maximum | 0.3 s |
Voltage increase time of the output voltage
| typical | 30 ms |
|---|
Output current
| rated value | 5 A |
|---|---|
| rated range | 0 ... 6 A; 5 A up to +60°C; +60 ... +70 °C: |
| 5 A | 10 |
| supplied active power typical | 120 W |
Short-term overload current
| on short-circuiting during the start-up typical | 15 A |
|---|
Duration of overloading capability for excess current
| on short-circuiting during the start-up | 800 ms |
|---|---|
| at short-circuit during operation | 800 ms |
| bridging of equipment | Yes |
| number of parallel-switched equipment resources | 2 |
Efficiency
| efficiency in percent | 88 % |
|---|
Power loss [W]
| at rated output voltage for rated value of the output current typical17 W | 26 |
|---|
Closed-loop control
| relative control precision of the output voltage with rapid fluctuation0.3 % | 0.3 |
|---|---|
| of the input voltage by +/- | 15% |
| relative control precision of the output voltage at load step of resist | 3 % |
Setting time
| load step | 10 to 90% typical |
|---|---|
| load step | 90 to 10% typical |
Protection and monitoring
| internal fault Vout < | 31.8 V internal fault |
|---|---|
| property of the output short-circuit proof | Yes |
| response value current limitation | 7 ... 7.5 A |
Overcurrent overload capability
| in | normal operation overload capability 150 % Iout rated up to |
|---|
Enduring short circuit current RMS value
| typical | 7 A |
|---|
Safety
| galvanic isolation between input and output | Yes |
|---|---|
| operating resource protection class | Class I |
Leakage current
| maximum | 3.5 mA |
|---|---|
| typical | 1 mA |
| protection class IP | IP20 |
Certificate of suitability
| CE marking | Yes |
|---|---|
| UL approval | Yes; cULus-Listed (UL61010-2-201, CSA |
| 60950-1, UL | 60950-1) 60950-1, |
| CSA approval | Yes; cULus-Listed (UL61010-2-201, CSA |
| EAC approval | Yes |
| IECEx | Yes; IECEx Ex ec nC IIC T3 Gc |
| ATEX | Yes; ATEX (EX) II 3G Ex ec nC IIC T3 Gc |
| ULhazloc approval | No |
| cCSAus, | Class 1, Division |
Type of certification
| CB-certificate | Yes |
|---|---|
| MTBF at | 40 °C 1 598 441 |
Standards, specifications, approvals marine classification
| shipbuilding approval | Yes |
|---|
Marine classification association
| American Bureau of Shipping Europe Ltd. (ABS) | No |
|---|---|
| French marine classification society (BV) | Yes |
| Lloyds Register of Shipping (LRS) | No |
Declaration
| Environmental Product Declaration | Yes |
|---|
Global Warming Potential [CO2 eq]
| total | 542.1 kg |
|---|---|
| during manufacturing | 9.9 kg |
| during operation | 531.8 kg |
| after end of life | 0.31 kg |
Ambient temperature
| during operation | -30 ... +70 °C; with natural convection |
|---|---|
| during transport | -40 ... +85 °C |
| during storage | -40 ... +85 °C |
Type of electrical connection push-in terminals push-in terminals
| 2.5 mm² single-core/finely stranded | 2.5 mm² |
|---|
Mm² mm²
| for auxiliary contacts Signaling contact: | 2 push-in terminals for 0.2 Signaling |
|---|---|
| for signaling contact | 2 push-in terminals for 0.2 ... 2.5 mm² |
| removable terminal at input | Yes |
| removable terminal at output | Yes |
Mechanical data
| width × height × depth of the enclosure | 160 mm × 74 mm |
|---|---|
| installation width × mounting height | 160 mm |
Required spacing
| top | 50 mm |
|---|---|
| bottom | 50 mm |
| left | 0 mm |
| right | 0 mm |
Accessories
| ity module, | DC UPS ity |
|---|
Additional information
| ambient temperature | +25 °C (unless other ambient |
|---|
Dòng catalog gốc (in theo catalog)
| Catalog row text | such as UL or GL, facilitate universal use. Its extremely flat design SIMATIC ET 200SP PS |
|---|
Thông tin thương mại
| Mã HS (CN8) | 85044083 |
|---|---|
| Xuất xứ (theo Siemens) | Romania (RO) |
| Khối lượng tịnh | 0.35 kg |
| UPC | 804766673276 |
| Nguồn catalog | KT 10.1 SITOP power supply (2024) p.5/18 |
Tài liệu
- Data sheet 6EP7133-6AB00-0BN0Datasheet PDF
- SiePortal 6EP7133-6AB00-0BN0Trang sản phẩm SiePortal
- CAx data 6EP7133-6AB00-0BN0 (via SiePortal "Download product images and data for M-CAD and E-CAD")CAD 2D/3D, EPLAN
- KT 10.1 SITOP power supply (2024)Catalog
Tài liệu mở tại website Siemens (SiePortal / Siemens TED).
Model khác: SITOP – 1-phase, 24 V DC (for SIMATIC ET 200SP)
Hỏi đáp về Siemens 6EP7133-6AB00-0BN0
Siemens 6EP7133-6AB00-0BN0 còn được cung cấp không?
Mã này có trong catalog Siemens hiện hành (KT 10.1 SITOP power supply (2024) p.5/18). Tình trạng giao hàng cụ thể được xác nhận khi báo giá.
Xuất xứ, mã HS và khối lượng của Siemens 6EP7133-6AB00-0BN0?
Xuất xứ theo siemens: romania; mã hs (cn8): 85044083; khối lượng tịnh 0.35 kg (theo dữ liệu Siemens cho mã 6EP7133-6AB00-0BN0; xuất xứ thực tế ghi trên CO của từng lô hàng).
Cần gửi gì để nhận báo giá Siemens 6EP7133-6AB00-0BN0?
Gửi mã đặt hàng (vd 6EP7133-6AB00-0BN0), số lượng, nơi giao và thời điểm cần hàng qua form bên dưới hoặc Zalo (+84) 938 888 958. Fast Group cung cấp hàng Siemens chính hãng, CO/CQ đầy đủ, cấp hàng nhanh; rfq nhận trước 16:00 được phản hồi trong ngày làm việc.