


6EP4333-0SB00-0AY0 Bộ nguồn Siemens 24 V 5 A
Mã đặt hàng: 6EP4333-0SB00-0AY0
Bộ nguồn Siemens 6EP4333-0SB00-0AY0 (SITOP – Medical applications): dòng định mức 5 A, ngõ ra 24 V / 5 A.
- Dòng sản phẩm
- SITOP – Medical applications
- Dòng định mức
- 5 A
- Điện áp ra
- 24 V
- Dòng ra
- 5 A
- Khối lượng
- 0.6 kg
- Mã HS
- 85044083
- Hàng Siemens chính hãng
- CO/CQ đầy đủ
- Cấp hàng nhanh
Mã đặt hàng 6EP4333-0SB00-0AY0
| Mã đặt hàng | Mô tả (catalog) | Khối lượng | Tình trạng | Datasheet | Báo giá |
|---|---|---|---|---|---|
| 6EP4333-0SB00-0AY0 | SITOP PSU2600 1-phase, 24 V DC/5 A | 0.6 kg | Có trong catalog 2026 | PDF ↗ | Báo giá mã này |
Thông số kỹ thuật
Thông số theo catalog Siemens cho mã 6EP4333-0SB00-0AY0 (KT 10.1 SITOP power supply (2024) p.7/34).
Product brand name SITOP PSU2600
| type of current supply | 24 V/5 A |
|---|---|
| ATEX | No |
| ULhazloc approval | No |
| cCSAus, | Class 1, Division 2 No |
| FM registration | No |
Input
| type of the power supply network | 1-phase AC or DC |
|---|---|
| supply voltage at | AC |
| minimum rated value | 120 V |
| maximum rated value | 230 V |
| initial value | 85 V |
| full-scale value | 264 V |
| supply voltage at | DC 110 ... 220 V |
| input voltage at | DC 88 ... 265 V |
| wide range input | Yes |
| buffering time for rated value of the output current in the event of power failure minimum | 30 ms |
| operating condition of the mains buffering at Vin = | 230 V |
| line frequency | 50 Hz/60 Hz |
| line frequency | 47 ... 63 Hz |
Input current
| at rated input voltage | 120 V 2.5 A |
|---|---|
| at rated input voltage | 230 V 1.4 A |
| current limitation of inrush current at | 25 °C maximum 36 A |
| fuse protection type | 3.15 A |
| fuse protection type in the feeder | None required. Fuse protection starting from 6 A Char. C pos |
Output
| voltage curve at output Controlled, isolated | DC voltage |
|---|---|
| output voltage at | DC rated value 24 V |
Output voltage
| at output | 1 at DC rated value 24 V |
|---|
24 V
| output voltage adjustable | Yes; via potentiometer |
|---|---|
| adjustable output voltage | 24 ... 28.8 V; max. 120 W |
Relative control precision of the output voltage
| on slow fluctuation of input voltage | 0.1 % |
|---|---|
| on slow fluctuation of ohm loading | 0.2 % |
Residual ripple
| maximum | 50 mV |
|---|
Voltage peak
| maximum | 200 mV |
|---|---|
| display version for | normal operation Green LED for 24 V OK |
| type of signal at output Relay contact (NO contact, rating | 60 V DC/ 0.3 A) for "24 V OK" |
| behavior of the output voltage when switching on | No overshoot of Vout (soft start) |
| response delay maximum | 1 s |
Voltage increase time of the output voltage
| maximum | 500 ms |
|---|
Output current
| rated value | 5 A |
|---|---|
| rated range | 0 ... 5 A; +60 °C |
5 A
| supplied active power typical | 120 W |
|---|
Constant overload current
| on short-circuiting during the start-up typical | 6 A |
|---|---|
| bridging of equipment | No |
Efficiency
| efficiency in percent | 89 % |
|---|
Power loss [W]
| at rated output voltage for rated value of the output current typical | 15 W |
|---|---|
| during | no-load operation maximum 1 W |
Closed-loop control
| relative control precision of the output voltage with rapid fluctuation of the input voltage by +/- | 0.1 % |
|---|
15% typical
| relative control precision of the output voltage load step of resistive load | 50/100/50 % typical 1 % |
|---|
Setting time
| load step | 50 to 100% typical 0.2 ms |
|---|---|
| load step | 100 to 50% typical 0.2 ms |
| relative control precision of the output voltage at load step of resistive load | 10/90/10 % typical 2 % |
| load step | 10 to 90% typical 0.2 ms |
| load step | 90 to 10% typical 0.2 ms |
| maximum | 10 ms |
Protection and monitoring
| design of the overvoltage protection < | 32 V |
|---|---|
| property of the output short-circuit proof | Yes |
Design of short-circuit protection Shutdown and periodic restart attempts
| typical | 6 A |
|---|
Safety
| galvanic isolation between input and output | Yes |
|---|---|
| galvanic isolation Safety extra low output voltage Vout according to EN | 60950-1 |
| operating resource protection class | Class I |
Leakage current
| maximum | 3.5 mA |
|---|---|
| typical | 1.1 mA |
| protection class IP | IP20 |
Standard
| for emitted interference EN | 55022 Class B |
|---|---|
| for mains harmonics limitation EN | 61000-3-2 |
| for interference immunity EN | 61000-6-2 |
Certificate of suitability
| CE marking | Yes |
|---|---|
| UL approval | Yes; cULus-Listed (UL 508, CSA C22.2 No. 107.1), File E197259 |
| CSA approval | Yes; cULus-Listed (UL 508, CSA C22.2 No. 107.1), File E197259 |
| EAC approval | Yes |
| NEC | Class 2 No |
| IECEx | No |
Type of certification
| CB-certificate | Yes |
|---|
Standards, specifications, approvals marine classification
| shipbuilding approval | No |
|---|
Marine classification association
| American Bureau of Shipping Europe Ltd. (ABS) | No |
|---|---|
| French marine classification society (BV) | No |
| Det | Norske Veritas (DNV) No |
| Lloyds Register of Shipping (LRS) | No |
Ambient temperature
| during operation | 0 ... 60 °C; with natural convection |
|---|---|
| during transport | -40 ... +85 °C |
| during storage | -40 ... +85 °C |
| environmental category according to IEC | 60721 Climate class 3K3, 5 ... 95% no condensation |
Type of electrical connection screw terminal
| at input L1, N, PE: | 1 screw terminal each for 0.2 ... 2.5 mm² single- |
|---|
Core/finely stranded
| at output +, | -: 2 screw terminals each for 0.2 ... 2.5 mm² |
|---|---|
| for auxiliary contacts | 13, 14 (alarm signal): 1 screw terminal each for 0.05 ... 2.5 mm² |
Mechanical data
| width × height × depth of the enclosure | 42 mm × 125 mm |
|---|---|
| installation width × mounting height | 42 mm |
Required spacing
| top | 50 mm |
|---|---|
| bottom | 50 mm |
| left | 0 mm |
| right | 0 mm |
| fastening method Snaps onto DIN rail EN | 60715 35x7.5/15 |
| standard rail mounting | Yes |
| S7 rail mounting | No |
| wall mounting | No |
| housing can be lined up | Yes |
| net weight | 0.6 kg |
Latest product versions are used. Use of product versions that
| are | no longer supported, and failure to apply the latest updates |
|---|
Dòng catalog gốc (in theo catalog)
| Catalog row text | SITOP PSU2600 1-phase, 24 V DC/5 A |
|---|
Thông tin thương mại
| Mã HS (CN8) | 85044083 |
|---|---|
| Xuất xứ (theo Siemens) | Hungary (HU) |
| Khối lượng tịnh | 0.6 kg |
| UPC | 804766987892 |
| Nguồn catalog | KT 10.1 SITOP power supply (2024) p.7/34 |
Tài liệu
- Data sheet 6EP4333-0SB00-0AY0Datasheet PDF
- SiePortal 6EP4333-0SB00-0AY0Trang sản phẩm SiePortal
- CAx data 6EP4333-0SB00-0AY0 (via SiePortal "Download product images and data for M-CAD and E-CAD")CAD 2D/3D, EPLAN
- KT 10.1 SITOP power supply (2024)Catalog
Tài liệu mở tại website Siemens (SiePortal / Siemens TED).
Model khác: SITOP – Medical applications
Hỏi đáp về Siemens 6EP4333-0SB00-0AY0
Siemens 6EP4333-0SB00-0AY0 còn được cung cấp không?
Mã này có trong catalog Siemens hiện hành (KT 10.1 SITOP power supply (2024) p.7/34). Tình trạng giao hàng cụ thể được xác nhận khi báo giá.
Xuất xứ, mã HS và khối lượng của Siemens 6EP4333-0SB00-0AY0?
Xuất xứ theo siemens: hungary; mã hs (cn8): 85044083; khối lượng tịnh 0.6 kg (theo dữ liệu Siemens cho mã 6EP4333-0SB00-0AY0; xuất xứ thực tế ghi trên CO của từng lô hàng).
Cần gửi gì để nhận báo giá Siemens 6EP4333-0SB00-0AY0?
Gửi mã đặt hàng (vd 6EP4333-0SB00-0AY0), số lượng, nơi giao và thời điểm cần hàng qua form bên dưới hoặc Zalo (+84) 938 888 958. Fast Group cung cấp hàng Siemens chính hãng, CO/CQ đầy đủ, cấp hàng nhanh; rfq nhận trước 16:00 được phản hồi trong ngày làm việc.