



6EP3437-8SB00-4AY0 Bộ nguồn Siemens 24 V 40 A
Mã đặt hàng: 6EP3437-8SB00-4AY0
Bộ nguồn Siemens 6EP3437-8SB00-4AY0 (SITOP PSU8400): dòng định mức 40 A, ngõ ra 24 V / 40 A.
- Dòng sản phẩm
- SITOP PSU8400
- Dòng định mức
- 40 A
- Điện áp ra
- 24 V
- Dòng ra
- 40 A
- Khối lượng
- 1.9 kg
- Mã HS
- 85044083
- Hàng Siemens chính hãng
- CO/CQ đầy đủ
- Cấp hàng nhanh
Mã đặt hàng 6EP3437-8SB00-4AY0
| Mã đặt hàng | Mô tả (catalog) | Khối lượng | Tình trạng | Datasheet | Báo giá |
|---|---|---|---|---|---|
| 6EP3437-8SB00-4AY0 | 1.9 kg | Có trong catalog 2026 | PDF ↗ | Báo giá mã này |
Thông số kỹ thuật
Thông số theo catalog Siemens cho mã 6EP3437-8SB00-4AY0 (KT 10.1 SITOP power supply (2024) p.2/38).
Product brand name SITOP PSU8400
| type of current supply | 24 V/40 A |
|---|---|
| typical | 50 ms |
| maximum | 50 ms |
| number of IO-Link ports | 1 |
| point-to-point cycle time between master and IO-Link device minimum | 10 ms |
| data volume of the address range of the outputs with cyclical transfer for all IO-Link ports max | 3 byte |
Input
| type of the power supply network | 3-phase AC or DC |
|---|---|
| supply voltage at | AC |
| minimum rated value | 400 V |
| maximum rated value | 500 V |
| initial value | 323 V |
| full-scale value | 576 V |
| supply voltage at | AC Derating 323 … 360 and 550 … 576 V |
| supply voltage at | DC 500 ... 550 V |
| input voltage at | DC 450 ... 600 V |
| wide range input | Yes |
| buffering time for rated value of the output current in the event of power failure minimum | 30 ms |
| operating condition of the mains buffering at Vin = | 400 V |
| line frequency | 50 Hz/60 Hz |
| line frequency | 47 ... 63 Hz |
Input current
| at rated input voltage | 400 V 1.5 A |
|---|---|
| at rated input voltage | 500 V 1.2 A |
| input current at | DC |
| at rated input voltage | 500 V 2 A |
| at rated input voltage | 550 V 1.8 A |
| current limitation of inrush current at | 25 °C maximum 5 A |
| I2t value maximum | 0.1 A²·s |
| fuse protection type | none |
| fuse protection type in the feeder required: | 3-pole coupled miniature circuit breaker (IEC 898; for |
| UL: UL489-listed/category DIVQ) characteristic C: | 4 - 16 A, or cir |
| alternatively slow fuses (for UL: UL248-listed); suitable | DC pro |
| tection must be provided when operating with | DC power sup |
Output
| voltage curve at output Controlled, isolated | DC voltage |
|---|---|
| number of outputs | 1 |
| output voltage at | DC rated value 24 V |
Output voltage
| at output | 1 at DC rated value 24 V |
|---|
24 V
| output voltage adjustable | Yes; via display and IO-Link interface |
|---|---|
| adjustable output voltage | 22 ... 28 V; Derating > 24 V: max. 960 W power output (1152 W |
| to | 45°C) |
Relative control precision of the output voltage
| on slow fluctuation of input voltage | 0.2 % |
|---|---|
| on slow fluctuation of ohm loading | 0.2 % |
Residual ripple
| maximum | 20 mV |
|---|
Voltage peak
| maximum | 100 mV |
|---|---|
| display version for | normal operation display and 3-color LED for operating, fault and communication |
Status
| type of signal at output relay contact (NO contact, contact rating | DC 30 V/0.1 A) for "24 |
|---|
V O.K."; configurable via IO-Link
| behavior of the output voltage when switching on | No overshoot of Vout (soft start) |
|---|---|
| response delay maximum | 0.5 s |
Output current
| rated value | 40 A |
|---|---|
| per output | 40 A |
| at output | 1 rated value 40 A |
| rated range | 0 ... 40 A; 48 A up to +45°C; +60 ... +70 °C: Derating 3.75%/K |
40 A
| supplied active power typical | 960 W |
|---|
Short-term overload current
| at short-circuit during operation typical | 120 A |
|---|
Duration of overloading capability for excess current
| at short-circuit during operation | 25 ms |
|---|
Constant overload current
| at short-circuit during operation typical | 48 A |
|---|---|
| bridging of equipment | Yes; active load distribution via control contact or inclined out |
Put characteristic can be selected via display and IO-Link
| number of parallel-switched equipment resources | 2 |
|---|
Efficiency
| efficiency in percent | 96 % |
|---|
Power loss [W]
| at rated output voltage for rated value of the output current typical | 38 W |
|---|---|
| during | no-load operation maximum 5 W |
Closed-loop control
| relative control precision of the output voltage with rapid fluctuation of the input voltage by +/- | 1 % |
|---|
15% typical
| relative control precision of the output voltage at load step of resistive load | 10/90/10 % typical 3 % |
|---|
Setting time
| maximum | 3 ms |
|---|
Protection and monitoring
| design of the overvoltage protection | max. 32 V |
|---|---|
| property of the output short-circuit proof | Yes |
Via display and IO-Link)
| response value current limitation | 30 ... 49 A |
|---|
Overcurrent overload capability
| in | normal operation 150 % IaRated up to 5 s/min (configurable via display and IO- |
|---|
Enduring short circuit current RMS value
| maximum | 56 A |
|---|---|
| typical | 48 A |
| display version for overload and short circuit display and | 3-color LED for operating status |
Interfaces
| product function communication function | Yes |
|---|
Protocol is supported
| IO-Link protocol | Yes |
|---|
Imum
| data volume of the address range of the inputs with cyclical transfer for all IO-Link ports maxim | 13 byte |
|---|
Um
| Protocol between master and IO-Link device Version | 1.1 Yes |
|---|
Safety
| galvanic isolation between input and output | Yes |
|---|---|
| galvanic isolation Safety extra low output voltage Vout according to EN | 61204-7 |
| operating resource protection class | Class I |
Leakage current
| maximum | 3.5 mA |
|---|---|
| protection class IP | IP20 |
Standard
| for emitted interference EN | 55022 Class B |
|---|---|
| for mains harmonics limitation EN | 61000-3-2 |
| for interference immunity EN | 61000-6-2 |
Certificate of suitability
| CE marking | Yes |
|---|---|
| UL approval | Yes; cULus-Listed (UL 508, CSA C22.2 No. 107.1), File E197259; |
| cCSAus (CSA C22.2 | No. 62368-1, UL 62368-1) |
| CSA approval | Yes; cULus-Listed (UL 508, CSA C22.2 No. 107.1), File E197259; |
| UKCA marking | Yes |
| EAC approval | Yes |
| Regulatory Compliance Mark (RCM) | Yes |
| NEC | Class 2 No |
| SEMI F47 | Yes |
| IECEx | No |
| ATEX | No |
| ULhazloc approval | No |
| cCSAus, | Class 1, Division 2 No |
| UKEX | No |
| CCC for hazardous zone according to GB standard | No |
| FM registration | No |
Type of certification
| BIS | Yes; in preparation |
|---|---|
| CB-certificate | Yes |
| MTBF at | 40 °C 340 000 h |
Standards, specifications, approvals marine classification
| shipbuilding approval | No |
|---|
Marine classification association
| American Bureau of Shipping Europe Ltd. (ABS) | No |
|---|---|
| French marine classification society (BV) | No |
| Det | Norske Veritas (DNV) No |
| Lloyds Register of Shipping (LRS) | No |
Ambient temperature
| during operation | -40 ... +70 °C; with natural convection |
|---|---|
| during transport | -40 ... +85 °C |
| during storage | -40 ... +85 °C |
| environmental category according to IEC | 60721 Climate class 3K3, 5 ... 95% no condensation |
Type of electrical connection screw-type terminals and push-in terminals
| at input L1, L2, L3, PE: | 1 screw terminal each for 0.2 ... 4 mm² single- |
|---|
Core/finely stranded
| at output | +1, +2, -1, -2, -3: 1 screw terminal each for 0.5 ... 16 mm² sol |
|---|
Id/finely stranded (10 mm² with ferrule)
| for auxiliary contacts PAR SYNC OUT/IN: | 1 push-in terminal each for 0.2 ... 1.5 mm² |
|---|---|
| for signaling contact | 13, 14: push-in for 0.2 ... 1.5 mm² |
| removable terminal at input | No |
| removable terminal at output | No |
| design of the interface for communication L+, C/Q, L- (IO-Link): | 1 push-in terminal each for 0.2 ... 1.5 mm² |
Mechanical data
| width × height × depth of the enclosure | 99 mm × 125 mm |
|---|---|
| installation width × mounting height | 99 mm |
Required spacing
| top | 40 mm |
|---|---|
| bottom | 40 mm |
| left | 0 mm |
| right | 0 mm |
| fastening method Snaps onto DIN rail EN | 60715 35x7.5/15 |
| standard rail mounting | Yes |
| S7 rail mounting | No |
| wall mounting | No |
| housing can be lined up | Yes |
| net weight | 1.9 kg |
Latest product versions are used. Use of product versions that
| are | no longer supported, and failure to apply the latest updates |
|---|
Dòng catalog gốc (in theo catalog)
| Catalog row text | SITOP PSU8400, 3-phase |
|---|
Thông tin thương mại
| Mã HS (CN8) | 85044083 |
|---|---|
| Xuất xứ (theo Siemens) | Romania (RO) |
| Khối lượng tịnh | 1.9 kg |
| UPC | 195125510593 |
| Nguồn catalog | KT 10.1 SITOP power supply (2024) p.2/38 |
Tài liệu
- Data sheet 6EP3437-8SB00-4AY0Datasheet PDF
- SiePortal 6EP3437-8SB00-4AY0Trang sản phẩm SiePortal
- CAx data 6EP3437-8SB00-4AY0 (via SiePortal "Download product images and data for M-CAD and E-CAD")CAD 2D/3D, EPLAN
- KT 10.1 SITOP power supply (2024)Catalog
Tài liệu mở tại website Siemens (SiePortal / Siemens TED).
Hỏi đáp về Siemens 6EP3437-8SB00-4AY0
Siemens 6EP3437-8SB00-4AY0 còn được cung cấp không?
Mã này có trong catalog Siemens hiện hành (KT 10.1 SITOP power supply (2024) p.2/38). Tình trạng giao hàng cụ thể được xác nhận khi báo giá.
Xuất xứ, mã HS và khối lượng của Siemens 6EP3437-8SB00-4AY0?
Xuất xứ theo siemens: romania; mã hs (cn8): 85044083; khối lượng tịnh 1.9 kg (theo dữ liệu Siemens cho mã 6EP3437-8SB00-4AY0; xuất xứ thực tế ghi trên CO của từng lô hàng).
Cần gửi gì để nhận báo giá Siemens 6EP3437-8SB00-4AY0?
Gửi mã đặt hàng (vd 6EP3437-8SB00-4AY0), số lượng, nơi giao và thời điểm cần hàng qua form bên dưới hoặc Zalo (+84) 938 888 958. Fast Group cung cấp hàng Siemens chính hãng, CO/CQ đầy đủ, cấp hàng nhanh; rfq nhận trước 16:00 được phản hồi trong ngày làm việc.