

6EP3436-8SB00-2AY0 Bộ nguồn Siemens
Mã đặt hàng: 6EP3436-8SB00-2AY0
Bộ nguồn Siemens 6EP3436-8SB00-2AY0 thuộc dòng SITOP PSU8600 power supply system. Mô tả theo catalog: SITOP PSU8600 3-phase, 24 V DC/20.
- Dòng sản phẩm
- SITOP PSU8600 power supply system
- Khối lượng
- 1.8 kg
- Mã HS
- 85044083
- Hàng Siemens chính hãng
- CO/CQ đầy đủ
- Cấp hàng nhanh
Mã đặt hàng 6EP3436-8SB00-2AY0
| Mã đặt hàng | Mô tả (catalog) | Khối lượng | Tình trạng | Datasheet | Báo giá |
|---|---|---|---|---|---|
| 6EP3436-8SB00-2AY0 | SITOP PSU8600 3-phase, 24 V DC/20 | 1.8 kg | Có trong catalog 2026 | PDF ↗ | Báo giá mã này |
Thông số kỹ thuật
Thông số theo catalog Siemens cho mã 6EP3436-8SB00-2AY0 (KT 10.1 SITOP power supply (2024) p.2/8).
Input
| minimum rated value | 400 V |
|---|---|
| maximum rated value | 500 V |
| initial value | 320 V |
| full-scale value | 575 V |
| supply voltage at | … 360 and 530 … |
| wide range input | Yes |
| buffering time for rated value of the output current | 15 ms |
In the event of power failure minimum
| operating condition of the mains buffering at Vin = | Vin = 400 V; Prioritized supply of |
|---|
Sion module)
| line frequency | 50 Hz/60 Hz |
|---|---|
| line frequency | 47 ... 63 Hz |
Input current
| at rated input voltage | 1.4 A |
|---|---|
| at rated input voltage | 1.1 A |
| current limitation of inrush current at | A 14 A |
Um
| I2t value maximum | 1.2 A²·s |
|---|---|
| UL489-listed/DIVQ) characteristic ature circuit breaker | ... 16 A char |
Output
| number of outputs | 1 |
|---|---|
| output voltage at | V 24 V |
Output voltage
| at output | V 24 V |
|---|---|
| output voltage adjustable | Yes; via potentiometer or IE/PN |
Interface interface interface
| adjustable output voltage | 4 ... 28 V; Derating > 24 V: 4%/V; |
|---|---|
| max. | 480 max. 480 W overall system |
Relative control precision of the output voltage
| on slow fluctuation of input voltage | 0.2 % |
|---|---|
| on slow fluctuation of ohm loading | 0.1 % |
Residual ripple
| maximum | 100 mV |
|---|
Voltage peak
| maximum | 200 mV |
|---|
Put; LED green for parallel opera put; LED green for parallel opera
| contact current capacity | current capacity DC 60 |
|---|---|
| behavior of the output voltage when switching on | No overshoot of Vout (soft start) |
Puts puts
| delay time of | time of 25 ms, 100 ms or |
|---|
Voltage increase time of the output voltage
| maximum | 500 ms |
|---|
Output current
| rated value | 20 A |
|---|---|
| per output | 20 A |
| at output | A 20 A |
| 2.5%/K; | derating in connection |
And total load of the outputs at the and total load of the outputs at the
| supplied active power typical | 480 W |
|---|
Short-term overload current
| at short-circuit during operation typical | operation without |
|---|
Via DIP switch via DIP switch
| bridging of equipment | output characteristics |
|---|
Efficiency
| efficiency in percent | 93 % |
|---|
Product brand name SITOP PSU8600 SITOP PSU8600 SITOP PSU8600
| at rated output voltage for rated value of the out | 34 W |
|---|---|
| screwed connection for | connection for 0.2 ... 1.5 |
Put current typical
| during | W 12 W |
|---|
Closed-loop control
| relative control precision of the output voltage with | 0.1 % |
|---|
Ical
| relative control precision of the output voltage load | 0.4 % |
|---|---|
| step of resistive load | typical |
Setting time
| maximum | 10 ms |
|---|
Protection and monitoring
| design of the overvoltage protection | max. 35 V (max. 500 ms) |
|---|---|
| property of the output short-circuit proof | Yes |
Switches switches
| adjustable current response value current of the cur | 2 ... 20 A |
|---|
Switching characteristic
| threshold) permissible for | permissible for 200 ms |
|---|---|
| of the current limitation Ia limit (= | limit (= 1.5 x Ia threshold) per |
Overcurrent overload capability
| display version for overload and short circuit | 3-color LED for operating state |
|---|
Face face
| remote reset function | Non-electrically isolated 24 V input |
|---|
Interfaces
| product function communication function | Yes |
|---|
Design of the interface Ethernet/PROFINET Ethernet/PROFINET Ethernet/PROFINET
| design of the interface PROFINET protocol | Yes |
|---|
Protocol is supported
| OPC UA | Yes |
|---|
Safety
| galvanic isolation between input and output | Yes |
|---|---|
| operating resource protection class | Class I |
Leakage current
| maximum | 3.5 mA |
|---|---|
| protection class IP | IP20 |
Certificate of suitability
| CE marking | Yes |
|---|---|
| UL approval | Yes; cULus-Listed (UL 508, CSA |
| CSA approval | Yes; cCSAus (CSA C22.2 No. |
| EAC approval | Yes |
| SEMI F47 | Yes |
| IECEx | No |
| ATEX | No |
| ULhazloc approval | No |
| FM registration | No |
Type of certification
| BIS | Yes; R-41188271 |
|---|---|
| CB-certificate | Yes |
Classification
| shipbuilding approval | Yes |
|---|
Marine classification association
| American Bureau of Shipping Europe Ltd. (ABS) | Yes |
|---|---|
| French marine classification society (BV) | No |
| Det | Yes Yes |
| Lloyds Register of Shipping (LRS) | No |
Environmental Product Declaration
| Environmental Product Declaration | Yes |
|---|
Global Warming Potential [CO2 eq]
| total | 1 093.1 kg |
|---|---|
| during manufacturing | 28.4 kg |
| during operation | 1 063.9 kg |
| after end of life | 0.41 kg |
Ambient temperature
| during operation | -25 ... +60 °C; with natural convec |
|---|
Tion tion tion
| during transport | -40 ... +85 °C |
|---|---|
| during storage | -40 ... +85 °C |
Connection connection connection
| for | ... 4 mm² single-wire / fine stran |
|---|
Mm² mm² mm²
| for signaling contact | 11, 12, 14 (alarm signal): Plug-in |
|---|---|
| removable terminal at input | Yes |
| removable terminal at output | Yes |
Ets (2-port switch) ets (2-port switch) ets (2-port switch)
| suitability for interaction modular system | Yes |
|---|
Mechanical data
| width × height × depth of the enclosure | 80 mm × 150 mm |
|---|---|
| installation width × mounting height | 80 mm |
Required spacing
| top | 50 mm |
|---|---|
| bottom | 50 mm |
| left | 0 mm |
| right | 0 mm |
| standard rail mounting | Yes |
| S7 rail mounting | No |
| wall mounting | No |
| housing can be lined up | Yes |
| net weight | 1.8 kg |
Security information
| versions that are | that are no longer suppor |
|---|
Dòng catalog gốc (in theo catalog)
| Catalog row text | SITOP PSU8600 3-phase, 24 V DC/20 |
|---|
Thông tin thương mại
| Mã HS (CN8) | 85044083 |
|---|---|
| Khối lượng tịnh | 1.8 kg |
| UPC | 804766224102 |
| Nguồn catalog | KT 10.1 SITOP power supply (2024) p.2/8 |
Tài liệu
- Data sheet 6EP3436-8SB00-2AY0Datasheet PDF
- SiePortal 6EP3436-8SB00-2AY0Trang sản phẩm SiePortal
- CAx data 6EP3436-8SB00-2AY0 (via SiePortal "Download product images and data for M-CAD and E-CAD")CAD 2D/3D, EPLAN
- IC 10 2018 Power supply (old edition) (2018)Catalog
- KT 10.1 SITOP power supply (2024)Catalog
Tài liệu mở tại website Siemens (SiePortal / Siemens TED).
Model khác: SITOP PSU8600 power supply system
Hỏi đáp về Siemens 6EP3436-8SB00-2AY0
Siemens 6EP3436-8SB00-2AY0 còn được cung cấp không?
Mã này có trong catalog Siemens hiện hành (KT 10.1 SITOP power supply (2024) p.2/8). Tình trạng giao hàng cụ thể được xác nhận khi báo giá.
Xuất xứ, mã HS và khối lượng của Siemens 6EP3436-8SB00-2AY0?
Mã hs (cn8): 85044083; khối lượng tịnh 1.8 kg (theo dữ liệu Siemens cho mã 6EP3436-8SB00-2AY0; xuất xứ thực tế ghi trên CO của từng lô hàng).
Cần gửi gì để nhận báo giá Siemens 6EP3436-8SB00-2AY0?
Gửi mã đặt hàng (vd 6EP3436-8SB00-2AY0), số lượng, nơi giao và thời điểm cần hàng qua form bên dưới hoặc Zalo (+84) 938 888 958. Fast Group cung cấp hàng Siemens chính hãng, CO/CQ đầy đủ, cấp hàng nhanh; rfq nhận trước 16:00 được phản hồi trong ngày làm việc.