

6EP3424-8UB00-0AY0 Bộ nguồn Siemens 12 V 20 A
Mã đặt hàng: 6EP3424-8UB00-0AY0
Bộ nguồn Siemens 6EP3424-8UB00-0AY0 (SITOP – Battery charging): dòng định mức 20 A, ngõ ra 12 V / 20 A.
- Dòng sản phẩm
- SITOP – Battery charging
- Dòng định mức
- 20 A
- Điện áp ra
- 12 V
- Dòng ra
- 20 A
- Khối lượng
- 1 kg
- Mã HS
- 85044060
- Hàng Siemens chính hãng
- CO/CQ đầy đủ
- Cấp hàng nhanh
Mã đặt hàng 6EP3424-8UB00-0AY0
| Mã đặt hàng | Mô tả (catalog) | Khối lượng | Tình trạng | Datasheet | Báo giá |
|---|---|---|---|---|---|
| 6EP3424-8UB00-0AY0 | Article number | 1 kg | Có trong catalog 2026 | PDF ↗ | Báo giá mã này |
Thông số kỹ thuật
Thông số theo catalog Siemens cho mã 6EP3424-8UB00-0AY0 (KT 10.1 SITOP power supply (2024) p.7/25).
Product brand name SITOP PSU3800
| type of current supply | 12 V/20 A |
|---|
Input
| type of the power supply network | 3-phase AC |
|---|---|
| supply voltage at | AC |
| minimum rated value | 400 V |
| maximum rated value | 500 V |
| initial value | 320 V |
| full-scale value | 575 V |
| wide range input | Yes |
| buffering time for rated value of the | 15 ms |
Failure minimum
| operating condition of the mains buf at Vin = | 400 V |
|---|
Fering
| The SITOP PSU3800 | 3-phase power supplies are suitable for battery line frequency 50 Hz/60 Hz |
|---|
Charging, thanks to their constant current characteristic.
| line frequency | 47 ... 63 Hz |
|---|
Product highlights input current
| 12 V/ | 20 A •at rated input voltage 400 V 0.7 A |
|---|---|
| 3-phase wide-range input, input voltage | 320 ... 575 V •at rated input voltage 500 V 0.6 A |
| current limitation of inrush current at | 16 A |
| Up to | 91% efficiency |
25 °C maximum
| I2t value maximum | 0.8 A²·s |
|---|---|
| Selection and ordering data fuse protection type | none |
| fuse protection type in the feeder Required: | 3-pole connected miniature |
| Input: | 400 ... 500 V 3 AC 489) |
| Output: | 12 V DC/20 A output |
| voltage curve at output Controlled, isolated | DC voltage |
| output voltage at | DC rated value 12 V |
Output voltage
| at output | 1 at DC rated value 12 V |
|---|
12 V
| output voltage adjustable | Yes; via potentiometer |
|---|---|
| adjustable output voltage | 12 ... 14 V; max. 240 W |
Voltage
| on slow fluctuation of input voltage | 0.1 % |
|---|---|
| on slow fluctuation of ohm loading | 0.2 % |
| maximum | 500 ms |
Residual ripple
| maximum | 100 mV |
|---|
Voltage peak
| maximum | 200 mV |
|---|---|
| display version for | normal operation Green LED for 12 V OK |
| type of signal at output Relay contact (NO contact, rating | 60 V |
| DC/ | 0.3 A) for 12 V OK |
| behavior of the output voltage when | No overshoot of Vout (soft start) |
Switching on
| response delay maximum | 2.5 s |
|---|
Product brand name SITOP PSU3800 product brand name SITOP PSU3800
| type of current supply | 12 V/20 A type of |
|---|---|
| type of current supply | current supply 12 V/20 A |
| rated value | 20 A protection |
| rated value | class IP IP20 |
| rated range | 0 ... 20 A; +60 |
| rated range | ... +70 °C: Derating standard |
20 A
| supplied active power typical | 240 |
|---|---|
| supplied active power typical | W |
Standards, specifications, approvals
| on short-circuiting during the start- | 22 |
|---|---|
| on short-circuiting during the start- | A |
| load step | 10 to 90% typical |
| load step | 0.2 ms marine classification |
Up typical certificate of suitability
| bridging of equipment | Yes; switchable characteristic |
|---|---|
| bridging of equipment | •CE marking Yes |
| ment resources | No. 107.1), |
| ment resources | File E197259 |
| efficiency | •CSA approval Yes; cULus-Listed |
| efficiency | (UL 508, CSA C22.2 |
| efficiency in percent | 91 |
| efficiency in percent | % |
Power loss [W]
| value of the output current typical | •NEC Class |
|---|---|
| value of the output current typical | 2 No |
Voltage with rapid fluctuation of the
| input voltage by +/- | 15% typical |
|---|---|
| input voltage by +/- | •CB-certificate Yes |
Setting time
| load step | 50 to 100% |
|---|---|
| load step | typical 0.2 ms |
| load step | 100 to 50% |
Relative control precision of the output2 %
| voltage at load step of resistive load | •cCSAus, Class 1, |
|---|---|
| voltage at load step of resistive load | Division 2 No |
Ltd. (ABS)
| design of the overvoltage protection < | 18 |
|---|---|
| design of the overvoltage protection < | V |
| property of the output short-circuit | Yes |
| property of the output short-circuit | (BV) |
Proof
| Det | Norske Veritas |
|---|---|
| Det | (DNV) Yes |
Design of short-circuit protection Alternatively, constant current charac
| teristic | approx. 22 A or latching shut |
|---|---|
| teristic | •Lloyds Register of Shipping (LRS) No |
Global Warming Potential [CO2 eq]
| typical | 22 |
|---|---|
| typical | A |
| total | 770.2 |
| total | kg |
Display version for overload and short LED yellow for "overload", LED red for
| during manufacturing | 18.9 |
|---|---|
| during manufacturing | kg |
Circuit "latching shutdown"
| safety | •during operation |
|---|---|
| safety | 750.8 kg |
Ambient temperature
| operating resource protection class | Class |
|---|---|
| operating resource protection class | I |
| leakage current | •during transport -40 |
| leakage current | ... +85 °C |
| maximum | 3.5 mA •during storage |
| maximum | -40 ... +85 °C |
| environmental category according to Climate class | 3K3, 5 ... |
| environmental category according to Climate class | 95% no con |
| IEC | 60721 |
| IEC | densation |
Tions with industrial cybersecurity
| at input L1, L2, L3, PE: | 1 screw |
|---|---|
| at input L1, L2, L3, PE: | terminal each |
4 mm² networks against cyber threats, it is
| each for | 0.14 ... 1.5 mm²; 15, 16 |
|---|---|
| each for | tinuously maintain – a holistic, state- |
| (Remote): | 1 screw terminal each |
| (Remote): | for of-the-art industrial cybersecurity |
Mechanical data concept. Customers are responsible
| width × height × depth of the enclos | 70 mm × 125 mm |
|---|---|
| width × height × depth of the enclos | for preventing unauthorized access to |
Networks. Such systems, machines
| installation width × mounting height | 70 |
|---|---|
| installation width × mounting height | mm |
Internet if and to the extent such a
| top | 50 |
|---|---|
| top | mm |
Connection is necessary and only
| bottom | 50 mm when |
|---|---|
| bottom | appropriate security measures |
(e.g. firewalls and/or network seg
| left | 0 mm mentation) are |
|---|---|
| left | in place. For additional |
| right | 0 mm information |
| right | on industrial cybersecur |
Ity measures that may be implemen
| fastening method Snaps onto DIN rail EN | 60715 ted, |
|---|---|
| fastening method Snaps onto DIN rail EN | please visit |
35x7.5/15 www.siemens.com/cybersecurity-
| standard rail mounting | Yes industry. Siemens’ |
|---|---|
| standard rail mounting | products and solu |
Product updates are applied as soon
| housing can be lined up | Yes as they are |
|---|---|
| housing can be lined up | available and that the |
Latest product versions are used. Use
| net weight | 1.2 |
|---|---|
| net weight | kg |
| of product versions that are | no |
| of product versions that are | longer |
Other information Specifications at rated input voltage
| and ambient temperature | +25 |
|---|---|
| and ambient temperature | °C |
Dòng catalog gốc (in theo catalog)
| Catalog row text | Article number |
|---|
Thông tin thương mại
| Mã HS (CN8) | 85044060 |
|---|---|
| Xuất xứ (theo Siemens) | Romania (RO) |
| Khối lượng tịnh | 1 kg |
| UPC | 804766257742 |
| Nguồn catalog | KT 10.1 SITOP power supply (2024) p.7/25 |
Tài liệu
- Data sheet 6EP3424-8UB00-0AY0Datasheet PDF
- SiePortal 6EP3424-8UB00-0AY0Trang sản phẩm SiePortal
- CAx data 6EP3424-8UB00-0AY0 (via SiePortal "Download product images and data for M-CAD and E-CAD")CAD 2D/3D, EPLAN
- KT 10.1 SITOP power supply (2024)Catalog
Tài liệu mở tại website Siemens (SiePortal / Siemens TED).
Model khác: SITOP – Battery charging
Hỏi đáp về Siemens 6EP3424-8UB00-0AY0
Siemens 6EP3424-8UB00-0AY0 còn được cung cấp không?
Mã này có trong catalog Siemens hiện hành (KT 10.1 SITOP power supply (2024) p.7/25). Tình trạng giao hàng cụ thể được xác nhận khi báo giá.
Xuất xứ, mã HS và khối lượng của Siemens 6EP3424-8UB00-0AY0?
Xuất xứ theo siemens: romania; mã hs (cn8): 85044060; khối lượng tịnh 1 kg (theo dữ liệu Siemens cho mã 6EP3424-8UB00-0AY0; xuất xứ thực tế ghi trên CO của từng lô hàng).
Cần gửi gì để nhận báo giá Siemens 6EP3424-8UB00-0AY0?
Gửi mã đặt hàng (vd 6EP3424-8UB00-0AY0), số lượng, nơi giao và thời điểm cần hàng qua form bên dưới hoặc Zalo (+84) 938 888 958. Fast Group cung cấp hàng Siemens chính hãng, CO/CQ đầy đủ, cấp hàng nhanh; rfq nhận trước 16:00 được phản hồi trong ngày làm việc.