

6EP3311-6SB00-0AY0 Bộ nguồn Siemens 5 V 6.3 A
Mã đặt hàng: 6EP3311-6SB00-0AY0
Bộ nguồn Siemens 6EP3311-6SB00-0AY0 (LOGO!Power): dòng định mức 6.3 A, ngõ ra 5 V / 6.3 A.
- Dòng sản phẩm
- LOGO!Power
- Dòng định mức
- 6.3 A
- Điện áp ra
- 5 V
- Dòng ra
- 6.3 A
- Khối lượng
- 0.2 kg
- Mã HS
- 85044083
- Hàng Siemens chính hãng
- CO/CQ đầy đủ
- Cấp hàng nhanh
Mã đặt hàng 6EP3311-6SB00-0AY0
| Mã đặt hàng | Mô tả (catalog) | Khối lượng | Tình trạng | Datasheet | Báo giá |
|---|---|---|---|---|---|
| 6EP3311-6SB00-0AY0 | Stabilized power supply | 0.2 kg | Có trong catalog 2026 | PDF ↗ | Báo giá mã này |
Thông số kỹ thuật
Thông số theo catalog Siemens cho mã 6EP3311-6SB00-0AY0 (KT 10.1 SITOP power supply (2024) p.4/23).
Product brand name LOGO!Power LOGO!Power
| type of current supply | 5 V/6.3 A |
|---|---|
| bridging of equipment | Yes |
| number of parallel-switched equipment resources | 2 |
Input
| type of the power supply network | 1-phase AC or DC |
|---|---|
| minimum rated value | 100 V |
| maximum rated value | 240 V |
| initial value | 85 V |
| full-scale value | 264 V |
| wide range input | Yes |
| overvoltage overload capability | 300 V AC for 1 s |
| buffering time for rated value of the output current in the event of | 40 ms |
Power failure minimum
| line frequency | 50 Hz/60 Hz |
|---|---|
| line frequency | 47 ... 63 Hz |
Input current
| at rated input voltage | A 0.71 A |
|---|---|
| at rated input voltage | A 0.37 A |
| I2t value maximum | 3 A²·s |
Output
| voltage curve at output Controlled, isolated | isolated DC voltage |
|---|
Output voltage
| 5 V | V |
|---|---|
| output voltage adjustable | Yes; via potentiometer |
| adjustable output voltage | 4.6 ... 5.4 V |
Relative control precision of the output voltage
| on slow fluctuation of input voltage | 0.1 % |
|---|---|
| on slow fluctuation of ohm loading | 0.1 % |
Residual ripple
| maximum | 100 mV |
|---|---|
| typical | 30 mV |
Voltage peak
| typical | 50 mV |
|---|---|
| display version for | OK Green LED for output voltage OK |
| behavior of the output voltage when switching on | No overshoot of Vout (soft start) |
| response delay maximum | 0.5 s |
Voltage increase time of the output voltage
| typical | 100 ms |
|---|
Output current
| rated value | 6.3 A |
|---|---|
| rated range | 0 ... 6.3 A; +55 ... +70 °C: Derating 2%/K |
| 2.6 … | … 9.9 A |
| supplied active power typical | 31.5 W |
Efficiency
| efficiency in percent | 79.8 % |
|---|
Power loss [W]
| at rated output voltage for rated value of the output current typical4.7 W | W |
|---|
Closed-loop control
| relative control precision of the output voltage with rapid fluctuation0.2 % | % |
|---|---|
| of the input voltage by +/- | typical |
| relative control precision of the output voltage at load step of resist | 7 % |
Setting time
| load step | 1 ms 1 ms |
|---|
Protection and monitoring
| design of the overvoltage protection | Yes, according to EN 60950-1 |
|---|---|
| property of the output short-circuit proof | Yes |
| typical | 8.2 A |
Overcurrent overload capability
| when switching on | 150% Iout rated typ. 200 ms |
|---|---|
| in | 200 overload capability 150% Iout rated typ. 200 |
Enduring short circuit current RMS value
| maximum | 8.2 A |
|---|---|
| measuring point for output current | Yes; 50 mV =^ 6.3 A |
Safety
| galvanic isolation between input and output | Yes |
|---|---|
| operating resource protection class | Class II (without protective conductor) |
| protection class IP | IP20 |
Standard
| for mains harmonics limitation | not applicable |
|---|
Certificate of suitability
| CE marking | Yes |
|---|---|
| UL approval | Yes; cULus-Listed (UL 508, CSA C22.2 No. |
| CSA approval | Yes; cULus-Listed (UL 508, CSA C22.2 No. |
| EAC approval | Yes |
| SEMI F47 | Yes |
| IECEx | No |
| ATEX | No |
| ULhazloc approval | No |
| cCSAus, | 2 No No |
| FM registration | No |
Type of certification
| CB-certificate | Yes |
|---|---|
| MTBF at | h 2 654 280 h |
Standards, specifications, approvals marine classification
| shipbuilding approval | Yes |
|---|
Marine classification association
| American Bureau of Shipping Europe Ltd. (ABS) | Yes |
|---|---|
| French marine classification society (BV) | Yes |
| Lloyds Register of Shipping (LRS) | Yes |
Declaration
| Environmental Product Declaration | Yes |
|---|
Global Warming Potential [CO2 eq]
| total | 254.5 kg |
|---|---|
| during manufacturing | 3.9 kg |
| during operation | 250.3 kg |
| after end of life | 0.13 kg |
Ambient temperature
| during operation | -25 ... +70 °C; with natural convection |
|---|---|
| during transport | -40 ... +85 °C |
| during storage | -40 ... +85 °C |
Type of electrical connection screw terminal screw terminal
| at input L, N: | N: 1 screw terminal each for 0.5 ... 2.5 |
|---|
Mm2 single-core/finely stranded mm2 single-core/finely stranded
| at output +, | -: 1 screw terminal each for 0.5 ... 2.5 mm² |
|---|
Mechanical data
| width × height × depth of the enclosure | 54 mm × 53 mm |
|---|---|
| installation width × mounting height | 54 mm |
Required spacing
| top | 20 mm |
|---|---|
| bottom | 20 mm |
| left | 0 mm |
| right | 0 mm |
| standard rail mounting | Yes |
| S7 rail mounting | No |
| wall mounting | Yes |
| housing can be lined up | Yes |
| net weight | 0.2 kg |
Additional information
| ambient temperature | temperature +25 °C (unless other |
|---|
Dòng catalog gốc (in theo catalog)
| Catalog row text | Stabilized power supply |
|---|
Thông tin thương mại
| Mã HS (CN8) | 85044083 |
|---|---|
| Xuất xứ (theo Siemens) | Romania (RO) |
| Khối lượng tịnh | 0.2 kg |
| UPC | 804766458934 |
| Nguồn catalog | KT 10.1 SITOP power supply (2024) p.4/23 |
Tài liệu
- Data sheet 6EP3311-6SB00-0AY0Datasheet PDF
- SiePortal 6EP3311-6SB00-0AY0Trang sản phẩm SiePortal
- CAx data 6EP3311-6SB00-0AY0 (via SiePortal "Download product images and data for M-CAD and E-CAD")CAD 2D/3D, EPLAN
- IC 10 2018 Power supply (old edition) (2018)Catalog
- KT 10.1 SITOP power supply (2024)Catalog
Tài liệu mở tại website Siemens (SiePortal / Siemens TED).
Model khác: LOGO!Power
Hỏi đáp về Siemens 6EP3311-6SB00-0AY0
Siemens 6EP3311-6SB00-0AY0 còn được cung cấp không?
Mã này có trong catalog Siemens hiện hành (KT 10.1 SITOP power supply (2024) p.4/23). Tình trạng giao hàng cụ thể được xác nhận khi báo giá.
Xuất xứ, mã HS và khối lượng của Siemens 6EP3311-6SB00-0AY0?
Xuất xứ theo siemens: romania; mã hs (cn8): 85044083; khối lượng tịnh 0.2 kg (theo dữ liệu Siemens cho mã 6EP3311-6SB00-0AY0; xuất xứ thực tế ghi trên CO của từng lô hàng).
Cần gửi gì để nhận báo giá Siemens 6EP3311-6SB00-0AY0?
Gửi mã đặt hàng (vd 6EP3311-6SB00-0AY0), số lượng, nơi giao và thời điểm cần hàng qua form bên dưới hoặc Zalo (+84) 938 888 958. Fast Group cung cấp hàng Siemens chính hãng, CO/CQ đầy đủ, cấp hàng nhanh; rfq nhận trước 16:00 được phản hồi trong ngày làm việc.