


6EP1536-3AA00 Bộ nguồn Siemens 24 V 20 A
Mã đặt hàng: 6EP1536-3AA00
Bộ nguồn Siemens 6EP1536-3AA00 (SITOP PSU400M): dòng định mức 20 A, ngõ ra 24 V / 20 A.
- Dòng sản phẩm
- SITOP PSU400M
- Dòng định mức
- 20 A
- Điện áp ra
- 24 V
- Dòng ra
- 20 A
- Khối lượng
- 1 kg
- Mã HS
- 85044095
- Hàng Siemens chính hãng
- CO/CQ đầy đủ
- Cấp hàng nhanh
Mã đặt hàng 6EP1536-3AA00
| Mã đặt hàng | Mô tả (catalog) | Khối lượng | Tình trạng | Datasheet | Báo giá |
|---|---|---|---|---|---|
| 6EP1536-3AA00 | 1-phase, 24 V DC/20 | 1 kg | Có trong catalog 2026 | PDF ↗ | Báo giá mã này |
Thông số kỹ thuật
Thông số theo catalog Siemens cho mã 6EP1536-3AA00 (KT 10.1 SITOP power supply (2024) p.6/16).
Product brand name SITOP PSU400M
| type of current supply | 24 V/20 A |
|---|---|
| FM registration | No |
Input
| type of the power supply network | DC voltage |
|---|---|
| supply voltage at | AC startup from 340 V DC; derating necessary at 300 ... 400 V DC |
| and | 824 ... 900 V DC |
| supply voltage at | DC 600 ... 600 V |
| input voltage at | DC 300 ... 900 V |
| overvoltage overload capability Shutdown at Vin > | 900 V DC |
| input current at | DC |
| at rated input voltage | 600 V 0.85 A |
| current limitation of inrush current at | 25 °C maximum 8 A |
| I2t value maximum | 0.02 A²·s |
| fuse protection type | yes, cut-off capacity 20 kA; L/R < 2 ms ("+" and "-" input) |
Output
| voltage curve at output Controlled, isolated | DC voltage |
|---|---|
| output voltage at | DC rated value 24 V |
Output voltage
| at output | 1 at DC rated value 24 V |
|---|
24 V
| output voltage adjustable | Yes; via potentiometer |
|---|---|
| adjustable output voltage | 24 ... 28.8 V; max. 480 W |
Relative control precision of the output voltage
| on slow fluctuation of input voltage | 0.3 % |
|---|---|
| on slow fluctuation of ohm loading | 0.3 % |
Residual ripple
| maximum | 150 mV |
|---|---|
| typical | 30 mV |
Voltage peak
| maximum | 200 mV |
|---|---|
| typical | 100 mV |
| display version for | normal operation Green LED for 24 V OK, green flashing LED for start delay |
| type of signal at output Relay contact (NO contact, rating | 60 V DC/ 0.3 A; 30 V DC/1 A) |
| for | 24 V OK |
| behavior of the output voltage when switching on | No overshoot of Vout (soft start) |
| response delay maximum | 0.1 s; 10 s adjustable using switch |
Voltage increase time of the output voltage
| maximum | 150 ms |
|---|
Output current
| rated value | 20 A |
|---|---|
| rated range | 0 ... 20 A; +60 ... +70 °C: Derating 5.5%/K |
20 A
| supplied active power typical | 480 W |
|---|
Short-term overload current
| on short-circuiting during the start-up typical | 40 A |
|---|---|
| at short-circuit during operation typical | 60 A |
Duration of overloading capability for excess current
| on short-circuiting during the start-up | 150 ms |
|---|---|
| at short-circuit during operation | 25 ms |
Constant overload current
| on short-circuiting during the start-up typical | 23 A |
|---|---|
| bridging of equipment | Yes; switchable characteristic |
| number of parallel-switched equipment resources | 2 |
Efficiency
| efficiency in percent | 95 % |
|---|
Power loss [W]
| at rated output voltage for rated value of the output current typical | 25 W |
|---|
Closed-loop control
| relative control precision of the output voltage with rapid fluctuation of the input voltage by +/- | 1.5 % |
|---|
15% typical
| relative control precision of the output voltage load step of resistive load | 50/100/50 % typical 1.5 % |
|---|
Setting time
| load step | 50 to 100% typical 1 ms |
|---|---|
| load step | 100 to 50% typical 1 ms |
| maximum | 5 ms |
Protection and monitoring
| design of the overvoltage protection < | 33 V |
|---|---|
| property of the output short-circuit proof | Yes |
| design of short-circuit protection Alternatively, constant current characteristic | approx. 22 A or |
Latching shutdown
| typical | 22 A |
|---|
Overcurrent overload capability
| in | normal operation overload capability 150 % Iout rated up to 5 s/min |
|---|
Safety
| galvanic isolation between input and output | Yes |
|---|
Galvanic isolation Protective extra low output voltage Vout according to EN
| 60950-1 and EN | 50178 |
|---|---|
| operating resource protection class | Class I |
| protection class IP | IP20 |
Standard
| for emitted interference EN | 55022 Class A (emission) |
|---|---|
| for interference immunity EN | 61000-6-2 |
Certificate of suitability
| CE marking | Yes |
|---|---|
| UL approval | Yes; cULus-Listed (UL 508, CSA C22.2 No. 107.1), File E197259 |
| CSA approval | Yes; cULus-Listed (UL 508, CSA C22.2 No. 107.1), File E197259 |
| EAC approval | Yes |
| Regulatory Compliance Mark (RCM) | Yes |
| NEC | Class 2 No |
| IECEx | No |
| ATEX | No |
| ULhazloc approval | No |
| cCSAus, | Class 1, Division 2 No |
Type of certification
| CB-certificate | Yes |
|---|---|
| MTBF at | 40 °C 622 277 h |
Standards, specifications, approvals marine classification
| shipbuilding approval | Yes |
|---|
Marine classification association
| American Bureau of Shipping Europe Ltd. (ABS) | No |
|---|---|
| French marine classification society (BV) | No |
| Det | Norske Veritas (DNV) Yes |
| Lloyds Register of Shipping (LRS) | No |
Standards, specifications, approvals Environmental Product Declaration
| Environmental Product Declaration | Yes |
|---|
Global Warming Potential [CO2 eq]
| total | 801.7 kg |
|---|---|
| during manufacturing | 18.9 kg |
| during operation | 782.3 kg |
| after end of life | 0.27 kg |
Ambient temperature
| during operation | -25 ... +70 °C; with natural convection |
|---|---|
| during transport | -40 ... +85 °C |
| during storage | -40 ... +85 °C |
| environmental category according to IEC | 60721 Climate class 3K3, 5 ... 95% no condensation |
Type of electrical connection screw terminal
| at input | DC input, +, -, PE: 1 screw terminal each for 0.2 ... 6/4 mm² |
|---|
Single-core/finely stranded
| at output +, | -: 2 screw terminals each for 0.2 ... 6/4 mm² single-core/finely |
|---|
Stranded
| for auxiliary contacts Alarm signals: | 2 screw terminals for 0.14 ... 1.5 mm² single- |
|---|
Mechanical data
| width × height × depth of the enclosure | 90 mm × 125 mm |
|---|---|
| installation width × mounting height | 90 mm |
Required spacing
| top | 50 mm |
|---|---|
| bottom | 50 mm |
| left | 0 mm |
| right | 0 mm |
| fastening method Snaps onto DIN rail EN | 60715 35x7.5/15 |
| standard rail mounting | Yes |
| S7 rail mounting | No |
| wall mounting | No |
| housing can be lined up | Yes |
| net weight | 1.2 kg |
Accessories
| mechanical accessories Device identification label | 20 mm × 7 mm, pale turquoise |
|---|
Latest product versions are used. Use of product versions that
| are | no longer supported, and failure to apply the latest updates |
|---|
Dòng catalog gốc (in theo catalog)
| Catalog row text | SITOP PSU400M 1-phase, 24 V DC/20 |
|---|
Thông tin thương mại
| Mã HS (CN8) | 85044095 |
|---|---|
| Khối lượng tịnh | 1 kg |
| UPC | 040892854770 |
| Nguồn catalog | KT 10.1 SITOP power supply (2024) p.6/16 |
Tài liệu
- Data sheet 6EP1536-3AA00Datasheet PDF
- SiePortal 6EP1536-3AA00Trang sản phẩm SiePortal
- CAx data 6EP1536-3AA00 (via SiePortal "Download product images and data for M-CAD and E-CAD")CAD 2D/3D, EPLAN
- KT 10.1 SITOP power supply (2024)Catalog
Tài liệu mở tại website Siemens (SiePortal / Siemens TED).
Model khác: SITOP PSU400M
Hỏi đáp về Siemens 6EP1536-3AA00
Siemens 6EP1536-3AA00 còn được cung cấp không?
Mã này có trong catalog Siemens hiện hành (KT 10.1 SITOP power supply (2024) p.6/16). Tình trạng giao hàng cụ thể được xác nhận khi báo giá.
Xuất xứ, mã HS và khối lượng của Siemens 6EP1536-3AA00?
Mã hs (cn8): 85044095; khối lượng tịnh 1 kg (theo dữ liệu Siemens cho mã 6EP1536-3AA00; xuất xứ thực tế ghi trên CO của từng lô hàng).
Cần gửi gì để nhận báo giá Siemens 6EP1536-3AA00?
Gửi mã đặt hàng (vd 6EP1536-3AA00), số lượng, nơi giao và thời điểm cần hàng qua form bên dưới hoặc Zalo (+84) 938 888 958. Fast Group cung cấp hàng Siemens chính hãng, CO/CQ đầy đủ, cấp hàng nhanh; rfq nhận trước 16:00 được phản hồi trong ngày làm việc.