

6EP1334-2BA20 Bộ nguồn Siemens 24 V 10 A
Mã đặt hàng: 6EP1334-2BA20
Bộ nguồn Siemens 6EP1334-2BA20 (SITOP smart): dòng định mức 10 A, ngõ ra 24 V / 10 A.
Trang chi tiết mã này (EAN, vòng đời PM, kích thước) có tại portal Siemens Việt Nam: 6EP1334-2BA20.
- Dòng sản phẩm
- SITOP smart
- Dòng định mức
- 10 A
- Điện áp ra
- 24 V
- Dòng ra
- 10 A
- Khối lượng
- 0.7 kg
- Mã HS
- 85044083
- Hàng Siemens chính hãng
- CO/CQ đầy đủ
- Cấp hàng nhanh
Mã đặt hàng 6EP1334-2BA20
| Mã đặt hàng | Mô tả (catalog) | Khối lượng | Tình trạng | Datasheet | Báo giá |
|---|---|---|---|---|---|
| 6EP1334-2BA20 | SITOP PSU100S 1-phase, 24 V | 0.7 kg | Có trong catalog 2026 | PDF ↗ | Báo giá mã này |
Thông số kỹ thuật
Thông số theo catalog Siemens cho mã 6EP1334-2BA20 (KT 10.1 SITOP power supply (2024) p.3/56).
Product brand name SITOP PSU100S SITOP PSU100S SITOP PSU100S SITOP PSU100S
| type of current supply | 24 V/10 A |
|---|---|
| during manufacturing | 20.7 kg |
| after end of life | 0.57 kg |
Input
| type of the power supply network | 1-phase AC |
|---|---|
| supply voltage | 120 V/230 V |
| wide range input | No |
| overvoltage overload capability | 2.3 × Vin rated, 1.3 ms |
Imum
| line frequency | 50 Hz/60 Hz |
|---|---|
| line frequency | 47 ... 63 Hz |
Maximum
| I2t value maximum | 5.6 A²·s |
|---|
Output voltage
| output voltage adjustable | Yes; via potentiometer |
|---|
Voltage
| on slow fluctuation of input voltage | 0.1 % |
|---|---|
| on slow fluctuation of ohm loading | 1 % |
Residual ripple
| maximum | 150 mV |
|---|
Voltage peak
| maximum | 240 mV |
|---|
Switching on start)
| response delay maximum | 0.3 s |
|---|
Voltage increase time of the output voltage
| typical | 20 ms |
|---|
Output current
| rated value | 10 A |
|---|---|
| rated range | 0 ... 12 A; 12 A up to +45°C; |
| supplied active power typical | 288 W |
Short-term overload current
| on short-circuiting during the start-up | 32 A |
|---|
Typical
| at short-circuit during operation typical | 32 A |
|---|
Excess current
| bridging of equipment | Yes |
|---|---|
| number of parallel-switched equipment | 2 |
Efficiency
| efficiency in percent | 90 % |
|---|
Power loss [W]
| at rated output voltage for rated value of | 25 W |
|---|
Closed-loop control
| relative control precision of the output | 0.3 % |
|---|
Protection and monitoring
| design of the overvoltage protection protection against over protection against over protection against over | to |
|---|---|
| fault Vout < | V fault Vout |
| property of the output short-circuit proof | Yes |
Istic istic istic matic restart
| response value current limitation | 7.1 A 12 |
|---|
Overcurrent overload capability
| Iout rated up to | up to 5 s/min Iout |
|---|
Safety
| galvanic isolation between input and out | Yes |
|---|
Put
| operating resource protection class | Class I |
|---|
Leakage current
| maximum | 3.5 mA |
|---|---|
| typical | 0.8 mA |
| protection class IP | IP20 |
Standard
| for mains harmonics limitation | EN 61000-3-2 |
|---|
Certificate of suitability
| CE marking | Yes |
|---|---|
| UL approval | Yes; cULus-Listed (UL 508, |
| CSA approval | Yes; cULus-Listed (UL 508, |
| EAC approval | Yes |
| IECEx | No |
| ATEX | No |
| ULhazloc approval | No |
| cCSAus, | No No |
| FM registration | No |
Type of certification
| CB-certificate | Yes |
|---|
Marine classification
| shipbuilding approval | Yes |
|---|
Marine classification association
| American Bureau of Shipping Europe Ltd. | No |
|---|
(ABS)
| French marine classification society (BV) | Yes |
|---|---|
| Lloyds Register of Shipping (LRS) | No |
Environmental Product Declaration
| Environmental Product Declaration | Yes |
|---|
Convection convection convection vection
| during transport | -40 ... +85 °C |
|---|---|
| during storage | -40 ... +85 °C |
| 60721 | no condensation |
Connection method
| 2.5 mm² | 2.5 |
|---|
Mechanical data
| width × height × depth of the enclosure | 70 mm × 120 mm |
|---|---|
| installation width × mounting height | 70 mm |
Required spacing
| top | 50 mm |
|---|---|
| bottom | 50 mm |
| left | 0 mm |
| right | 0 mm |
| standard rail mounting | Yes |
| S7 rail mounting | No |
| wall mounting | No |
| housing can be lined up | Yes |
| net weight | 0.8 kg |
Security information
| product versions that are | that are no product |
|---|
Dòng catalog gốc (in theo catalog)
| Catalog row text | SITOP PSU100S 1-phase, 24 V |
|---|
Thông tin thương mại
| Mã HS (CN8) | 85044083 |
|---|---|
| Khối lượng tịnh | 0.7 kg |
| UPC | 887621038649 |
| Nguồn catalog | KT 10.1 SITOP power supply (2024) p.3/56 |
Tài liệu
- Data sheet 6EP1334-2BA20Datasheet PDF
- SiePortal 6EP1334-2BA20Trang sản phẩm SiePortal
- CAx data 6EP1334-2BA20 (via SiePortal "Download product images and data for M-CAD and E-CAD")CAD 2D/3D, EPLAN
- IC 10 2018 Power supply (old edition) (2018)Catalog
- KT 10.1 SITOP power supply (2024)Catalog
Tài liệu mở tại website Siemens (SiePortal / Siemens TED).
Model khác: SITOP smart
Hỏi đáp về Siemens 6EP1334-2BA20
Siemens 6EP1334-2BA20 còn được cung cấp không?
Mã này có trong catalog Siemens hiện hành (KT 10.1 SITOP power supply (2024) p.3/56). Tình trạng giao hàng cụ thể được xác nhận khi báo giá.
Xuất xứ, mã HS và khối lượng của Siemens 6EP1334-2BA20?
Mã hs (cn8): 85044083; khối lượng tịnh 0.7 kg (theo dữ liệu Siemens cho mã 6EP1334-2BA20; xuất xứ thực tế ghi trên CO của từng lô hàng).
Cần gửi gì để nhận báo giá Siemens 6EP1334-2BA20?
Gửi mã đặt hàng (vd 6EP1334-2BA20), số lượng, nơi giao và thời điểm cần hàng qua form bên dưới hoặc Zalo (+84) 938 888 958. Fast Group cung cấp hàng Siemens chính hãng, CO/CQ đầy đủ, cấp hàng nhanh; rfq nhận trước 16:00 được phản hồi trong ngày làm việc.