



6EP1332-4BA00 Bộ nguồn Siemens 24 V 3 A
Mã đặt hàng: 6EP1332-4BA00
Bộ nguồn Siemens 6EP1332-4BA00 (SITOP – 1-phase, 24 V DC): dòng định mức 3 A, ngõ ra 24 V / 3 A.
Trang chi tiết mã này (EAN, vòng đời PM, kích thước) có tại portal Siemens Việt Nam: 6EP1332-4BA00.
- Dòng sản phẩm
- SITOP – 1-phase, 24 V DC (for S7-1500 and ET 200MP)
- Dòng định mức
- 3 A
- Điện áp ra
- 24 V
- Dòng ra
- 3 A
- Khối lượng
- 0.45 kg
- Mã HS
- 85044083
- Hàng Siemens chính hãng
- CO/CQ đầy đủ
- Cấp hàng nhanh
Mã đặt hàng 6EP1332-4BA00
| Mã đặt hàng | Mô tả (catalog) | Khối lượng | Tình trạng | Datasheet | Báo giá |
|---|---|---|---|---|---|
| 6EP1332-4BA00 | •50% "Extra Power" for 5 seconds per minute for short-term over / loads, for example, when switching on 24 V | 0.45 kg | Có trong catalog 2026 | PDF ↗ | Báo giá mã này |
Thông số kỹ thuật
Thông số theo catalog Siemens cho mã 6EP1332-4BA00 (KT 10.1 SITOP power supply (2024) p.5/13).
Product brand name S7-1500 PM1507 S7-1500 PM1507
| type of current supply | 24 V/3 A |
|---|---|
| at short-circuit during operation typical | 12 A |
| CB-certificate | Yes |
| MTBF at | 40 °C 1 611 993 |
Input
| type of the power supply network | 1-phase AC |
|---|---|
| supply voltage | 120 V/230 V |
| wide range input | No |
| overvoltage overload capability | 2.3 × Vin rated, 1.3 ms |
| buffering time for rated value of the output current in the event of | 20 ms |
Power failure minimum
| line frequency | 50 Hz/60 Hz |
|---|---|
| line frequency | 45 ... 65 Hz |
Input current
| at rated input voltage | 120 V 1.4 |
|---|---|
| at rated input voltage | 230 V 0.8 |
| duration of inrush current limiting at | 25 |
| maximum | 3 ms |
| I2t value maximum | 1.3 A²·s |
| fuse protection type in the feeder Recommended miniature circuit breaker: | 10 Recommended miniature |
| A characteristic B or | 6 A characteristic C A characteristic |
Output
| voltage curve at output Controlled, isolated | DC voltage Controlled, |
|---|
24 V
| output voltage adjustable | No |
|---|---|
| relative overall tolerance of the voltage | 1 |
Relative control precision of the output voltage
| on slow fluctuation of input voltage | 0.1 % |
|---|---|
| on slow fluctuation of ohm loading | 0.1 % |
Residual ripple
| maximum | 50 mV |
|---|
Voltage peak
| maximum | 150 mV |
|---|---|
| display version for | normal operation LED green for 24 V OK; LED red for error; |
Yellow for stand-by yellow for stand-by
| behavior of the output voltage when switching on | No overshoot of Vout (soft start) |
|---|---|
| response delay maximum | 1.5 s |
Voltage increase time of the output voltage
| typical | 10 ms |
|---|
Output current
| rated value | 3 A |
|---|---|
| rated range | 0 ... 3 A |
| 5.1 … | 9.9 |
| supplied active power typical | 72 W |
Short-term overload current
| on short-circuiting during the start-up typical | 12 A |
|---|
Duration of overloading capability for excess current
| on short-circuiting during the start-up | 70 ms |
|---|---|
| at short-circuit during operation | 70 ms |
| bridging of equipment | Yes |
| number of parallel-switched equipment resources | 2 |
Efficiency
| efficiency in percent | 87 % |
|---|
Power loss [W]
| at rated output voltage for rated value of the output current typical11 W | 21 |
|---|
Closed-loop control
| relative control precision of the output voltage with rapid fluctuation0.1 % | 0.1 |
|---|---|
| of the input voltage by +/- | 15% |
| relative control precision of the output voltage load step of resistive | 1 % |
| relative control precision of the output voltage at load step of resist | 3 % |
Setting time
| load step | 10 to 90% typical |
|---|---|
| load step | 90 to 10% typical |
| maximum | 5 ms |
Protection and monitoring
| loop control) at < | 28.8 V loop control) |
|---|---|
| property of the output short-circuit proof | Yes |
| response value current limitation | 3.15 ... 3.6 A |
| typical | 3.4 A |
Safety
| galvanic isolation between input and output | Yes |
|---|---|
| operating resource protection class | Class I |
Leakage current
| maximum | 3.5 mA |
|---|---|
| typical | 0.4 mA |
| protection class IP | IP20 |
Certificate of suitability
| CE marking | Yes |
|---|---|
| UL approval | Yes; cULus-Listed (UL 508, CSA C22.2 No. |
| CSA approval | Yes; cULus-Listed (UL 508, CSA C22.2 No. |
| EAC approval | Yes |
| NEC | Class 2 |
| IECEx | Yes; IECEx Ex nA nC IIC T4 Gc |
| ATEX | Yes; ATEX (EX) II 3G Ex nA nC IIC T4 Gc |
| ULhazloc approval | Yes |
| cCSAus, | Class 1, Division |
| FM registration | Yes; Class I, Div. 2, Group ABCD, T4 |
Type of certification
| BIS | Yes; R-41183539 |
|---|
Standards, specifications, approvals marine classification
| shipbuilding approval | Yes |
|---|
Marine classification association
| American Bureau of Shipping Europe Ltd. (ABS) | Yes |
|---|---|
| French marine classification society (BV) | Yes |
| Lloyds Register of Shipping (LRS) | No |
Ambient temperature
| during operation | 0 ... 60 °C; with natural convection |
|---|---|
| during transport | -40 ... +85 °C |
| during storage | -40 ... +85 °C |
Connection method
| type of electrical connection | Screw-/spring clamp connection |
|---|
Mm² mm²
| at output L+, M: | 2 spring-loaded terminals each for 0.5 L+, |
|---|---|
| removable terminal at input | Yes |
| removable terminal at output | Yes |
Required spacing
| top | 40 mm |
|---|---|
| bottom | 40 mm |
| left | 0 mm |
| right | 0 mm |
| standard rail mounting | No |
| S7 rail mounting | Yes |
| wall mounting | No |
| housing can be lined up | Yes |
| net weight | 0.45 kg |
Additional information
| ambient temperature | +25 °C (unless other ambient |
|---|
Product versions are used. Use of product
| versions that are | no longer |
|---|
Dòng catalog gốc (in theo catalog)
| Catalog row values (as printed) | SIMATIC | PM | 1507 |
|---|
Thông tin thương mại
| Mã HS (CN8) | 85044083 |
|---|---|
| Khối lượng tịnh | 0.45 kg |
| UPC | 887621053451 |
| Nguồn catalog | KT 10.1 SITOP power supply (2024) p.5/13 |
Tài liệu
- Data sheet 6EP1332-4BA00Datasheet PDF
- SiePortal 6EP1332-4BA00Trang sản phẩm SiePortal
- CAx data 6EP1332-4BA00 (via SiePortal "Download product images and data for M-CAD and E-CAD")CAD 2D/3D, EPLAN
- KT 10.1 SITOP power supply (2024)Catalog
Tài liệu mở tại website Siemens (SiePortal / Siemens TED).
Model khác: SITOP – 1-phase, 24 V DC (for S7-1500 and ET 200MP)
Hỏi đáp về Siemens 6EP1332-4BA00
Siemens 6EP1332-4BA00 còn được cung cấp không?
Mã này có trong catalog Siemens hiện hành (KT 10.1 SITOP power supply (2024) p.5/13). Tình trạng giao hàng cụ thể được xác nhận khi báo giá.
Xuất xứ, mã HS và khối lượng của Siemens 6EP1332-4BA00?
Mã hs (cn8): 85044083; khối lượng tịnh 0.45 kg (theo dữ liệu Siemens cho mã 6EP1332-4BA00; xuất xứ thực tế ghi trên CO của từng lô hàng).
Cần gửi gì để nhận báo giá Siemens 6EP1332-4BA00?
Gửi mã đặt hàng (vd 6EP1332-4BA00), số lượng, nơi giao và thời điểm cần hàng qua form bên dưới hoặc Zalo (+84) 938 888 958. Fast Group cung cấp hàng Siemens chính hãng, CO/CQ đầy đủ, cấp hàng nhanh; rfq nhận trước 16:00 được phản hồi trong ngày làm việc.