

6EP1322-1LD01 Bộ nguồn Siemens 12 V 8.5 A
Mã đặt hàng: 6EP1322-1LD01
Bộ nguồn Siemens 6EP1322-1LD01 (SITOP – Wall mounting): dòng định mức 8.5 A, ngõ ra 12 V / 8.5 A.
- Dòng sản phẩm
- SITOP – Wall mounting
- Dòng định mức
- 8.5 A
- Điện áp ra
- 12 V
- Dòng ra
- 8.5 A
- Khối lượng
- 0.29 kg
- Mã HS
- 85044083
- Hàng Siemens chính hãng
- CO/CQ đầy đủ
- Cấp hàng nhanh
Mã đặt hàng 6EP1322-1LD01
| Mã đặt hàng | Mô tả (catalog) | Khối lượng | Tình trạng | Datasheet | Báo giá |
|---|---|---|---|---|---|
| 6EP1322-1LD01 | PSU100D 1-phase, 12 V DC/8.5 A | 0.29 kg | Có trong catalog 2026 | PDF ↗ | Báo giá mã này |
Thông số kỹ thuật
Thông số theo catalog Siemens cho mã 6EP1322-1LD01 (KT 10.1 SITOP power supply (2024) p.7/4).
Product brand name PSU100D PSU100D
| type of current supply | 12 V/8.5 A |
|---|---|
| Lloyds Register of Shipping (LRS) | No |
Input
| type of the power supply network | 1-phase AC |
|---|---|
| minimum rated value | 100 V |
| maximum rated value | 240 V |
| initial value | 90 V |
| full-scale value | 264 V |
| wide range input | Yes |
| overvoltage overload capability | 1.25 × Vin rated, 500 ms |
| buffering time for rated value of the output current in the event of | 9 ms |
Power failure minimum
| line frequency | 50 Hz/60 Hz |
|---|---|
| line frequency | 47 ... 63 Hz |
Input current
| at rated input voltage | A 2.2 A |
|---|---|
| at rated input voltage | A 1.2 A |
| I2t value maximum | 2.5 A²·s |
Output
| voltage curve at output Controlled, isolated | isolated DC voltage |
|---|
Output voltage
| 12 V | V |
|---|---|
| output voltage adjustable | Yes; via potentiometer |
| adjustable output voltage | 10.8 ... 13.2 V |
Relative control precision of the output voltage
| on slow fluctuation of input voltage | 0.5 % |
|---|---|
| on slow fluctuation of ohm loading | 0.5 % |
Voltage peak
| maximum | 120 mV |
|---|---|
| display version for | OK Green LED for 12 V OK |
| behavior of the output voltage when switching on Overshoot of Vout < | Vout < 10 % |
| response delay maximum | 0.5 s |
Voltage increase time of the output voltage
| maximum | 30 ms |
|---|
Output current
| rated value | 8.5 A |
|---|---|
| rated range | 0 ... 8.5 A; +50 ... +70 °C: Derating 2.0%/K |
| 2.6 … | … 9.9 A |
| supplied active power typical | 100 W |
| bridging of equipment | No |
Efficiency
| efficiency in percent | 87.5 % |
|---|
Power loss [W]
| at rated output voltage for rated value of the output current typical5.7 W | W |
|---|
Closed-loop control
| relative control precision of the output voltage load step of resistive | 10 % |
|---|
Setting time
| load step | 4 ms 4 ms |
|---|
Protection and monitoring
| property of the output short-circuit proof | Yes |
|---|---|
| response value current limitation | 9.35 ... 14.88 A |
Enduring short circuit current RMS value
| typical | 9 A |
|---|
Safety
| galvanic isolation between input and output | Yes |
|---|---|
| operating resource protection class | Class I |
Leakage current
| maximum | 0.5 mA |
|---|
Certificate of suitability
| CE marking | Yes |
|---|---|
| UL approval | Yes; cULus-Listed (UL 508, CSA C22.2 No. |
| CSA approval | Yes; cULus-Listed (UL 508, CSA C22.2 No. |
| UKCA marking | Yes |
| EAC approval | No |
| NEC | No No |
| IECEx | No |
| ATEX | No |
| ULhazloc approval | No |
| cCSAus, | 2 No No |
| FM registration | No |
Type of certification
| BIS | Yes; R-611003204 |
|---|---|
| CB-certificate | Yes |
Standards, specifications, approvals marine classification
| shipbuilding approval | No |
|---|
Marine classification association
| American Bureau of Shipping Europe Ltd. (ABS) | No |
|---|---|
| French marine classification society (BV) | No |
Declaration
| Environmental Product Declaration | Yes |
|---|
Global Warming Potential [CO2 eq]
| total | 450.7 kg |
|---|---|
| during manufacturing | 5.7 kg |
| during operation | 444.8 kg |
| after end of life | 0.09 kg |
Ambient temperature
| during operation | -25 ... +70 °C; with natural convection; The |
|---|---|
| device is | is not recommended to be placed on |
Plastics). plastics).
| during transport | -40 ... +85 °C |
|---|---|
| during storage | -40 ... +85 °C |
Mechanical data
| width × height × depth of the enclosure | 97 mm × 129 mm |
|---|
Fastening method Wall mounting Wall mounting
| standard rail mounting | No |
|---|---|
| S7 rail mounting | No |
| wall mounting | Yes |
| net weight | 0.29 kg |
Additional information
| ambient temperature | temperature +25 °C (unless other |
|---|
Dòng catalog gốc (in theo catalog)
| Catalog row text | PSU100D 1-phase, 12 V DC/8.5 A |
|---|
Thông tin thương mại
| Mã HS (CN8) | 85044083 |
|---|---|
| Xuất xứ (theo Siemens) | Ấn Độ (IN) |
| Khối lượng tịnh | 0.29 kg |
| UPC | 195125478862 |
| Nguồn catalog | KT 10.1 SITOP power supply (2024) p.7/4 |
Tài liệu
- Data sheet 6EP1322-1LD01Datasheet PDF
- SiePortal 6EP1322-1LD01Trang sản phẩm SiePortal
- CAx data 6EP1322-1LD01 (via SiePortal "Download product images and data for M-CAD and E-CAD")CAD 2D/3D, EPLAN
- KT 10.1 SITOP power supply (2024)Catalog
Tài liệu mở tại website Siemens (SiePortal / Siemens TED).
Model khác: SITOP – Wall mounting
Hỏi đáp về Siemens 6EP1322-1LD01
Siemens 6EP1322-1LD01 còn được cung cấp không?
Mã này có trong catalog Siemens hiện hành (KT 10.1 SITOP power supply (2024) p.7/4). Tình trạng giao hàng cụ thể được xác nhận khi báo giá.
Xuất xứ, mã HS và khối lượng của Siemens 6EP1322-1LD01?
Xuất xứ theo siemens: ấn độ; mã hs (cn8): 85044083; khối lượng tịnh 0.29 kg (theo dữ liệu Siemens cho mã 6EP1322-1LD01; xuất xứ thực tế ghi trên CO của từng lô hàng).
Cần gửi gì để nhận báo giá Siemens 6EP1322-1LD01?
Gửi mã đặt hàng (vd 6EP1322-1LD01), số lượng, nơi giao và thời điểm cần hàng qua form bên dưới hoặc Zalo (+84) 938 888 958. Fast Group cung cấp hàng Siemens chính hãng, CO/CQ đầy đủ, cấp hàng nhanh; rfq nhận trước 16:00 được phản hồi trong ngày làm việc.