Hàng Schneider chính hãngCO/CQ đầy đủCấp hàng nhanhZalo / Hotline (+84) 938 888 958
TM221C16T Bộ điều khiển lập trình (PLC) Schneider Modicon M221
Hình ảnh tham khảo © Schneider Electric
Schneider Electric · Logic Controller - Modicon M221

TM221C16T Bộ điều khiển lập trình (PLC) Schneider Logic Controller - Modicon M221

Đang sản xuất

Bộ điều khiển lập trình (PLC) Schneider Electric TM221C16T thuộc dòng Logic Controller - Modicon M221: [Us] Điện áp nguồn định mức 24 V DC; loại ngõ ra số Transistor; số ngõ ra số 7 transistor 2 fast output; số ngõ vào số 9, discrete input 4 fast input theo IEC 61131-2 Type 1.

[Us] Điện áp nguồn định mức
24 V DC
Số ngõ vào số
9, discrete input 4 fast input conforming to IEC 61131-2 Type 1
Số ngõ vào analog
2 at 0…10 V
Loại ngõ ra số
Transistor
Số ngõ ra số
7 transistor 2 fast output
Discrete output voltage
24 V DC
Discrete output current
0.5 A
GTIN / EAN-13
3606480648700
Xuất xứ (tham khảo)
Đài Loan
Bảo hành hãng
18 tháng
  • Hàng Schneider chính hãng
  • CO/CQ đầy đủ
  • Cấp hàng nhanh

Mô tả TM221C16T

TM221C16T là bộ điều khiển lập trình (PLC) thuộc dòng Logic Controller - Modicon M221 của Schneider Electric. Thông số định mức chính: [Us] Điện áp nguồn định mức 24 V DC; Số ngõ vào số 9, discrete input 4 fast input theo IEC 61131-2 Type 1; Số ngõ vào analog 2 ở 0…10 V; Loại ngõ ra số Transistor.

Bộ điều khiển lập trình (PLC) thực hiện logic điều khiển máy và dây chuyền theo chương trình, kết nối với cảm biến, cơ cấu chấp hành và mạng truyền thông.

Đặc tính kỹ thuật nổi bật

  • Số ngõ ra số: 7 transistor 2 fast output
  • Discrete output voltage: 24 V DC
  • Discrete output current: 0.5 A

Lắp đặt

Về lắp đặt, TM221C16T có lắp trên Top hat type TH35-15 rail theo IEC 60715, Top hat type TH35-7.5 rail theo IEC 60715, plate or panel with fixing kit; kích thước rộng × cao × sâu 95 mm × 90 mm × 70 mm; khối lượng tịnh 0.346 kg.

Môi trường làm việc

Điều kiện làm việc theo dữ liệu của hãng: cấp bảo vệ IP20 with protective cover in place; nhiệt độ môi trường khi vận hành -10…55 °C (horizontal installation), -10…35 °C (vertical installation); nhiệt độ bảo quản -25…70 °C; độ cao vận hành 0…2000 m; độ ẩm tương đối 10…95 %, without condensation (in operation), 10…95 %, without condensation (in storage); cấp ô nhiễm <= 2.

Tiêu chuẩn, chứng nhận và độ bền

TM221C16T đáp ứng tiêu chuẩn IEC 61131-2, UL 508, CAN/CSA C22.2 No. 213, IACS E10, ANSI/ISA 12-12-01; chứng nhận RCM, LR, cULus, ABS, EAC, DNV-GL, …; độ bền cơ khí 20000000 cycles for transistor output.

Tình trạng sản xuất

TM221C16T đang được Schneider Electric sản xuất và bán thương mại.

Đặt hàng

Thông tin đặt hàng: mã vạch GTIN-13 3606480648700; đóng gói cấp 1: 1 PCE; bảo hành hãng 18 tháng; xuất xứ tham khảo Đài Loan (theo dữ liệu thị trường quốc tế, có thể khác theo lô hàng về Việt Nam). Fast Group cung cấp hàng Schneider Electric chính hãng, CO/CQ đầy đủ theo lô; gửi mã TM221C16T và số lượng qua form RFQ để nhận báo giá.

Thông số kỹ thuật TM221C16T

Tên thông số giữ thuật ngữ tiếng Anh của Schneider (chữ nhỏ) để tiện đối chiếu datasheet.

Thông số chính

Dòng sản phẩmRange of productModicon M221
Loại sản phẩmProduct or component typeLogic controller
[Us] Điện áp nguồn định mức[Us] rated supply voltage24 V DC
Số ngõ vào sốDiscrete input number9, discrete input 4 fast input conforming to IEC 61131-2 Type 1
Số ngõ vào analogAnalogue input number2 at 0…10 V
Loại ngõ ra sốDiscrete output typeTransistor
Số ngõ ra sốDiscrete output number7 transistor 2 fast output
Discrete output voltage24 V DC
Discrete output current0.5 A
Thông số bổ sung
Discrete I/O number16
Maximum number of I/O expansion module4 (local I/O-Architecture) | 11 (remote I/O-Architecture)
Giới hạn điện áp nguồnSupply voltage limits20.4…28.8 V
Inrush current35 A
Maximum power consumption in W10 W at 24 V (with max number of I/O expansion module) | 3.9 W at 24 V (without I/O expansion module)
Dòng ra của bộ nguồnPower supply output current0.325 A 5 V for expansion bus | 0.15 A 24 V for expansion bus
Discrete input logicSink or source (positive/negative)
Discrete input voltage24 V
Discrete input voltage typeDC
Analogue input resolution10 bits
LSB value10 mV
Conversion time1 ms per channel + 1 controller cycle time for analogue input analog input
Permitted overload on inputs+/- 30 V DC for 5 min (maximum) for analog input | +/- 13 V DC (permanent) for analog input
Voltage state 1 guaranteed>= 15 V for input
Voltage state 0 guaranteed<= 5 V for input
Discrete input current7 mA for discrete input | 5 mA for fast input
Input impedance3.4 kOhm for discrete input | 100 kOhm for analog input | 4.9 kOhm for fast input
Response time35 µs turn-off, I2…I5 terminal(s) for input | 5 µs turn-on, I0, I1, I6, I7 terminal(s) for fast input | 35 µs turn-on, other terminals terminal(s) for input | 5 µs turn-off, I0, I1, I6, I7 terminal(s) for fast input | 100 µs turn-off, other terminals terminal(s) for input | 5 µs turn-on, turn-off, Q0…Q1 terminal(s) for output | 50 µs turn-on, turn-off, Q2…Q3 terminal(s) for output | 300 µs turn-on, turn-off, other terminals terminal(s) for output
Configurable filtering time0 ms for input | 3 ms for input | 12 ms for input
Discrete output logicPositive logic (source)
Maximum current per output common3.5 A
Output frequency100 kHz for fast output (PWM/PLS mode) at Q0…Q1 | 5 kHz for output at Q2…Q3 | 0.1 kHz for output at Q4…Q6
Absolute accuracy error+/- 1 % of full scale for analog input
Maximum leakage current0.1 mA for transistor output
Maximum voltage drop<1 V
Độ bền cơ khíMechanical durability20000000 cycles for transistor output
Maximum tungsten load<12 W for output and fast output
Kiểu bảo vệProtection typeOverload and short-circuit protection at 0.2 A
Thời gian resetReset time1 s automatic reset
Memory capacity256 kB for user application and data RAM with 10000 instructions | 256 kB for internal variables RAM
Data backed up256 kB built-in flash memory for backup of application and data
Data storage equipment2 GB SD card (optional)
Battery typeBR2032 or CR2032X lithium non-rechargeable
Backup time1 year at 25 °C (by interruption of power supply)
Execution time for 1 KInstruction0.3 ms for event and periodic task
Execution time per instruction0.2 µs Boolean
Exct time for event task60 µs response time
Maximum size of object areas512 %KW constant words | 512 %M memory bits | 255 %TM timers | 8000 %MW memory words | 255 %C counters
Realtime clockWith
Clock drift<= 30 s/month at 25 °C
Regulation loopAdjustable PID regulator up to 14 simultaneous loops
Positioning functionsPosition PTO 2 axe(s)pulse/direction mode (100 kHz) | Position PTO 1 axe(s)CW/CCW mode (100 kHz)
Function availableFrequency generator | PWM | PLS
Counting input number4 fast input (HSC mode) at 100 kHz 32 bits
counter functionPulse/direction | A/B | Single phase
Integrated connection typeUSB port with mini B USB 2.0 connector | Non isolated serial link serial 1 with RJ45 connector and RS485 interface | Non isolated serial link serial 2 with RJ45 connector and RS232/RS485 interface
Supply(serial)serial link supply: 5 V, <200 mA
Tốc độ truyềnTransmission rate1.2…115.2 kbit/s (115.2 kbit/s by default) for bus length of 15 m for RS485 | 1.2…115.2 kbit/s (115.2 kbit/s by default) for bus length of 3 m for RS232 | 480 Mbit/s for USB
Giao thức truyền thôngCommunication port protocolUSB port: USB - SoMachine-Network | Non isolated serial link: Modbus master/slave - RTU/ASCII or SoMachine-Network
Báo hiệu tại chỗLocal signalling1 LED (green) for PWR | 1 LED (green) for RUN | 1 LED (red) for module error (ERR) | 1 LED (green) for SD card access (SD) | 1 LED (red) for BAT | 1 LED (green) for SL1 | 1 LED (green) for SL2 | 1 LED per channel (green) for I/O state
Đấu nối điệnElectrical connectionremovable screw terminal block for inputs | removable screw terminal block for outputs | terminal block, 3 terminal(s) for connecting the 24 V DC power supply | connector, 4 terminal(s) for analogue inputs | Mini B USB 2.0 connector for a programming terminal
Maximum cable distance between devicesShielded cable: <10 m for fast input | Unshielded cable: <30 m for output | Unshielded cable: <30 m for digital input | Unshielded cable: <1 m for analog input | Shielded cable: <3 m for fast output
InsulationBetween input and internal logic at 500 V AC | Non-insulated between inputs | Between output and internal logic at 500 V AC | Non-insulated between analogue input and internal logic | Non-insulated between analogue inputs | Between supply and ground at 1500 V AC | Between input and ground at 500 V AC | Between supply and internal logic at 2300 V AC
Ký hiệuMarkingCE
Kiểu lắp đặtMounting supportTop hat type TH35-15 rail conforming to IEC 60715 | Top hat type TH35-7.5 rail conforming to IEC 60715 | plate or panel with fixing kit
Chiều caoHeight90 mm
Chiều sâuDepth70 mm
Chiều rộngWidth95 mm
Khối lượng tịnhNet weight0.346 kg
Môi trường & tiêu chuẩn
Tiêu chuẩnStandardsIEC 61131-2 | UL 508 | CAN/CSA C22.2 No. 213 | IACS E10 | ANSI/ISA 12-12-01
Chứng nhậnProduct certificationsRCM | LR | cULus | ABS | EAC | DNV-GL | CE | UKCA | cULus HazLoc
Environmental characteristicOrdinary and hazardous location
Resistance to electrostatic discharge8 kV in air conforming to IEC 61000-4-2 | 4 kV on contact conforming to IEC 61000-4-2
Resistance to electromagnetic fields10 V/m 80 MHz…1 GHz conforming to IEC 61000-4-3 | 3 V/m 1.4 GHz…2 GHz conforming to IEC 61000-4-3 | 1 V/m 2…2.7 GHz conforming to IEC 61000-4-3
Resistance to magnetic fields30 A/m 50/60 Hz conforming to IEC 61000-4-8
Resistance to fast transients2 kV (power lines) conforming to IEC 61000-4-4 | 2 kV (relay output) conforming to IEC 61000-4-4 | 1 kV (I/O) conforming to IEC 61000-4-4 | 1 kV (Ethernet line) conforming to IEC 61000-4-4 | 1 kV (serial link) conforming to IEC 61000-4-4
Surge withstand2 kV power lines (AC) common mode conforming to IEC 61000-4-5 | 2 kV relay output common mode conforming to IEC 61000-4-5 | 1 kV I/O common mode conforming to IEC 61000-4-5 | 1 kV shielded cable common mode conforming to IEC 61000-4-5 | 0.5 kV power lines (DC) differential mode conforming to IEC 61000-4-5 | 1 kV power lines (AC) differential mode conforming to IEC 61000-4-5 | 1 kV relay output differential mode conforming to IEC 61000-4-5 | 0.5 kV power lines (DC) common mode conforming to IEC 61000-4-5
Resistance to conducted disturbances10 V 0.15…80 MHz conforming to IEC 61000-4-6 | 3 V 0.1…80 MHz conforming to Marine specification (LR, ABS, DNV, GL) | 10 V spot frequency (2, 3, 4, 6.2, 8.2, 12.6, 16.5, 18.8, 22, 25 MHz) conforming to Marine specification (LR, ABS, DNV, GL)
Electromagnetic emissionConducted emissions - test level: 79 dBμV/m QP/66 dBμV/m AV ( power lines (AC)) at 0.15…0.5 MHz conforming to IEC 55011 | Conducted emissions - test level: 73 dBμV/m QP/60 dBμV/m AV ( power lines (AC)) at 0.5…300 MHz conforming to IEC 55011 | Conducted emissions - test level: 120…69 dBµV/m QP ( power lines) at 10…150 kHz conforming to IEC 55011 | Conducted emissions - test level: 63 dBμV/m QP ( power lines) at 1.5…30 MHz conforming to IEC 55011 | Radiated emissions - test level: 40 dBμV/m QP class A ( 10 m) at 30…230 MHz conforming to IEC 55011 | Conducted emissions - test level: 79…63 dBμV/m QP ( power lines) at 150…1500 kHz conforming to IEC 55011 | Radiated emissions - test level: 47 dBμV/m QP class A ( 10 m) at 200…1000 MHz conforming to IEC 55011
Immunity to microbreaks10 ms
Nhiệt độ môi trường khi vận hànhAmbient air temperature for operation-10…55 °C (horizontal installation) | -10…35 °C (vertical installation)
Nhiệt độ bảo quảnAmbient air temperature for storage-25…70 °C
Độ ẩm tương đốiRelative humidity10…95 %, without condensation (in operation) | 10…95 %, without condensation (in storage)
Cấp bảo vệ IPIP degree of protectionIP20 with protective cover in place
Cấp ô nhiễmPollution degree<= 2
Độ cao vận hànhOperating altitude0…2000 m
Storage altitude0…3000 m
Khả năng chịu rungVibration resistance3.5 mm at 5…8.4 Hz on symmetrical rail | 3.5 mm at 5…8.4 Hz on panel mounting | 1 gn at 8.4…150 Hz on symmetrical rail | 1 gn at 8.4…150 Hz on panel mounting
Khả năng chịu sốcShock resistance147 m/s² for 11 ms

Đóng gói

Cấp đóng góiĐơn vịSố lượngD × R × CKhối lượng
Cấp 1PCE114.163 × 14.031 × 11.129 cm551.0 g
Cấp 2CAR2056.6 × 39.1 × 28.8 cm11.98 kg
Cấp 3P1224080.0 × 120.0 × 105.0 cm150 kg

Tài liệu

Tài liệu mở tại website Schneider Electric.

Mã khác trong dòng Logic Controller - Modicon M221

Xem toàn bộ dòng Logic Controller - Modicon M221 (45 mã) →

Câu hỏi thường gặp

Hỏi đáp về TM221C16T

TM221C16T còn sản xuất không?

Có. Theo dữ liệu Schneider Electric, TM221C16T đang được sản xuất và bán thương mại. Fast Group kiểm tra hàng sẵn và thời gian giao khi báo giá.

Mã vạch (GTIN/EAN) của TM221C16T là gì?

GTIN-13 của TM221C16T là 3606480648700, dùng để đối chiếu nhãn hàng khi nhận hàng.

Mua bộ điều khiển lập trình (plc) Schneider TM221C16T chính hãng ở đâu?

Fast Group cung cấp bộ điều khiển lập trình (plc) Schneider TM221C16T chính hãng, CO/CQ đầy đủ theo lô, giao toàn quốc từ TP.HCM và Vũng Tàu. RFQ nhận trước 16:00 được phản hồi trong ngày làm việc.