Hàng Schneider chính hãngCO/CQ đầy đủCấp hàng nhanhZalo / Hotline (+84) 938 888 958
TM221C16R Bộ điều khiển lập trình (PLC) Schneider Modicon M221
Hình ảnh tham khảo © Schneider Electric
Schneider Electric · Logic Controller - Modicon M221

TM221C16R Bộ điều khiển lập trình (PLC) Schneider Logic Controller - Modicon M221

Đang sản xuất

Bộ điều khiển lập trình (PLC) Schneider Electric TM221C16R thuộc dòng Logic Controller - Modicon M221: [Us] Điện áp nguồn định mức 100…240 V AC; loại ngõ ra số Relay normally open; số ngõ ra số 7 relay; số ngõ vào số 9, discrete input theo IEC 61131-2 Type 1.

[Us] Điện áp nguồn định mức
100…240 V AC
Số ngõ vào số
9, discrete input conforming to IEC 61131-2 Type 1
Số ngõ vào analog
2 at 0…10 V
Loại ngõ ra số
Relay normally open
Số ngõ ra số
7 relay
Discrete output voltage
5…125 V DC | 5…250 V AC
Discrete output current
2 A
GTIN / EAN-13
3606480648694
Xuất xứ (tham khảo)
Đài Loan
Bảo hành hãng
18 tháng
  • Hàng Schneider chính hãng
  • CO/CQ đầy đủ
  • Cấp hàng nhanh

Mô tả TM221C16R

TM221C16R là bộ điều khiển lập trình (PLC) thuộc dòng Logic Controller - Modicon M221 của Schneider Electric. Thông số định mức chính: [Us] Điện áp nguồn định mức 100…240 V AC; Số ngõ vào số 9, discrete input theo IEC 61131-2 Type 1; Số ngõ vào analog 2 ở 0…10 V; Loại ngõ ra số Relay normally open.

Bộ điều khiển lập trình (PLC) thực hiện logic điều khiển máy và dây chuyền theo chương trình, kết nối với cảm biến, cơ cấu chấp hành và mạng truyền thông.

Đặc tính kỹ thuật nổi bật

  • Số ngõ ra số: 7 relay
  • Discrete output voltage: 5…125 V DC, 5…250 V AC
  • Discrete output current: 2 A

Lắp đặt

Về lắp đặt, TM221C16R có lắp trên Top hat type TH35-15 rail theo IEC 60715, Top hat type TH35-7.5 rail theo IEC 60715, plate or panel with fixing kit; kích thước rộng × cao × sâu 95 mm × 90 mm × 70 mm; khối lượng tịnh 0.346 kg.

Môi trường làm việc

Điều kiện làm việc theo dữ liệu của hãng: cấp bảo vệ IP20 with protective cover in place; nhiệt độ môi trường khi vận hành -10…55 °C (horizontal installation), -10…35 °C (vertical installation); nhiệt độ bảo quản -25…70 °C; độ cao vận hành 0…2000 m; độ ẩm tương đối 10…95 %, without condensation (in operation), 10…95 %, without condensation (in storage); cấp ô nhiễm <= 2.

Tiêu chuẩn, chứng nhận và độ bền

TM221C16R đáp ứng tiêu chuẩn IEC 61131-2, UL 508, CAN/CSA C22.2 No. 213, IACS E10, ANSI/ISA 12-12-01; chứng nhận RCM, ABS, LR, DNV-GL, EAC, cULus, …; độ bền cơ khí 20000000 cycles for relay output; độ bền điện 100000 cycles AC-12, 120 V, 240 VA, resistive, 100000 cycles AC-12, 240 V, 480 VA, resistive, 300000 cycles AC-12, 120 V, 80 VA, resistive, 300000 cycles AC-12, 240 V, 160 VA, resistive, 100000 cycles AC-15, cos phi = 0.35, 120 V, 60 VA, inductive, 100000 cycles AC-15, cos phi = 0.35, 240 V, 120 VA, inductive, ….

Tình trạng sản xuất

TM221C16R đang được Schneider Electric sản xuất và bán thương mại.

Đặt hàng

Thông tin đặt hàng: mã vạch GTIN-13 3606480648694; đóng gói cấp 1: 1 PCE; bảo hành hãng 18 tháng; xuất xứ tham khảo Đài Loan (theo dữ liệu thị trường quốc tế, có thể khác theo lô hàng về Việt Nam). Fast Group cung cấp hàng Schneider Electric chính hãng, CO/CQ đầy đủ theo lô; gửi mã TM221C16R và số lượng qua form RFQ để nhận báo giá.

Thông số kỹ thuật TM221C16R

Tên thông số giữ thuật ngữ tiếng Anh của Schneider (chữ nhỏ) để tiện đối chiếu datasheet.

Thông số chính

Dòng sản phẩmRange of productModicon M221
Loại sản phẩmProduct or component typeLogic controller
[Us] Điện áp nguồn định mức[Us] rated supply voltage100…240 V AC
Số ngõ vào sốDiscrete input number9, discrete input conforming to IEC 61131-2 Type 1
Số ngõ vào analogAnalogue input number2 at 0…10 V
Loại ngõ ra sốDiscrete output typeRelay normally open
Số ngõ ra sốDiscrete output number7 relay
Discrete output voltage5…125 V DC | 5…250 V AC
Discrete output current2 A
Thông số bổ sung
Discrete I/O number16
Maximum number of I/O expansion module4 (local I/O-Architecture) | 11 (remote I/O-Architecture)
Giới hạn điện áp nguồnSupply voltage limits85…264 V
Tần số lướiNetwork frequency50/60 Hz
Inrush current40 A
Maximum power consumption in VA46 VA at 100…240 V with max number of I/O expansion module | 31 VA at 100…240 V without I/O expansion module
Dòng ra của bộ nguồnPower supply output current0.325 A 5 V for expansion bus | 0.12 A 24 V for expansion bus
Discrete input logicSink or source (positive/negative)
Discrete input voltage24 V
Discrete input voltage typeDC
Analogue input resolution10 bits
LSB value10 mV
Conversion time1 ms per channel + 1 controller cycle time for analogue input analog input
Permitted overload on inputs+/- 30 V DC for 5 min (maximum) for analog input | +/- 13 V DC (permanent) for analog input
Voltage state 1 guaranteed>= 15 V for input
Voltage state 0 guaranteed<= 5 V for input
Discrete input current7 mA for discrete input | 5 mA for fast input
Input impedance3.4 kOhm for discrete input | 100 kOhm for analog input | 4.9 kOhm for fast input
Response time35 µs turn-off, I2…I5 terminal(s) for input | 10 ms turn-on for output | 10 ms turn-off for output | 5 µs turn-on, I0, I1, I6, I7 terminal(s) for fast input | 35 µs turn-on, other terminals terminal(s) for input | 5 µs turn-off, I0, I1, I6, I7 terminal(s) for fast input | 100 µs turn-off, other terminals terminal(s) for input
Configurable filtering time0 ms for input | 3 ms for input | 12 ms for input
Output voltage limits125 V DC | 277 V AC
Maximum current per output common6 A at COM 1 | 7 A at COM 0
Absolute accuracy error+/- 1 % of full scale for analog input
Độ bền điệnElectrical durability100000 cycles AC-12, 120 V, 240 VA, resistive | 100000 cycles AC-12, 240 V, 480 VA, resistive | 300000 cycles AC-12, 120 V, 80 VA, resistive | 300000 cycles AC-12, 240 V, 160 VA, resistive | 100000 cycles AC-15, cos phi = 0.35, 120 V, 60 VA, inductive | 100000 cycles AC-15, cos phi = 0.35, 240 V, 120 VA, inductive | 300000 cycles AC-15, cos phi = 0.35, 120 V, 18 VA, inductive | 300000 cycles AC-15, cos phi = 0.35, 240 V, 36 VA, inductive | 100000 cycles AC-14, cos phi = 0.7, 120 V, 120 VA, inductive | 100000 cycles AC-14, cos phi = 0.7, 240 V, 240 VA, inductive | 300000 cycles AC-14, cos phi = 0.7, 120 V, 36 VA, inductive | 300000 cycles AC-14, cos phi = 0.7, 240 V, 72 VA, inductive | 100000 cycles DC-12, 24 V, 48 W, resistive | 300000 cycles DC-12, 24 V, 16 W, resistive | 100000 cycles DC-13, 24 V, 24 W, inductive (L/R = 7 ms) | 300000 cycles DC-13, 24 V, 7.2 W, inductive (L/R = 7 ms)
Tần số đóng cắtSwitching frequency20 switching operations/minute with maximum load
Độ bền cơ khíMechanical durability20000000 cycles for relay output
Minimum load1 mA at 5 V DC for relay output
Kiểu bảo vệProtection typeWithout protection at 5 A
Thời gian resetReset time1 s
Memory capacity256 kB for user application and data RAM with 10000 instructions | 256 kB for internal variables RAM
Data backed up256 kB built-in flash memory for backup of application and data
Data storage equipment2 GB SD card (optional)
Battery typeBR2032 or CR2032X lithium non-rechargeable
Backup time1 year at 25 °C (by interruption of power supply)
Execution time for 1 KInstruction0.3 ms for event and periodic task
Execution time per instruction0.2 µs Boolean
Exct time for event task60 µs response time
Maximum size of object areas512 %KW constant words | 512 %M memory bits | 255 %C counters | 8000 %MW memory words | 255 %TM timers
Realtime clockWith
Clock drift<= 30 s/month at 25 °C
Regulation loopAdjustable PID regulator up to 14 simultaneous loops
Counting input number4 fast input (HSC mode) at 100 kHz 32 bits
counter functionSingle phase | Frequency meter | Dual phase (quadrature) | Dual phase (pulse/direction)
Integrated connection typeUSB port with mini B USB 2.0 connector | Non isolated serial link serial 1 with RJ45 connector and RS485 interface | Non isolated serial link serial 2 with RJ45 connector and RS232/RS485 interface
Supply(serial)serial link supply: 5 V, <200 mA
Tốc độ truyềnTransmission rate1.2…115.2 kbit/s (115.2 kbit/s by default) for bus length of 15 m for RS485 | 1.2…115.2 kbit/s (115.2 kbit/s by default) for bus length of 3 m for RS232 | 480 Mbit/s for USB
Giao thức truyền thôngCommunication port protocolUSB port: USB - SoMachine-Network | Non isolated serial link: Modbus master/slave - RTU/ASCII or SoMachine-Network
Báo hiệu tại chỗLocal signalling1 LED (green) for PWR | 1 LED (green) for RUN | 1 LED (red) for module error (ERR) | 1 LED (green) for SD card access (SD) | 1 LED (red) for BAT | 1 LED (green) for SL1 | 1 LED (green) for SL2 | 1 LED per channel (green) for I/O state
Đấu nối điệnElectrical connectionremovable screw terminal block for inputs | removable screw terminal block for outputs | terminal block, 3 terminal(s) for connecting the 24 V DC power supply | connector, 4 terminal(s) for analogue inputs | Mini B USB 2.0 connector for a programming terminal
Maximum cable distance between devicesShielded cable: <10 m for fast input | Unshielded cable: <30 m for output | Unshielded cable: <30 m for digital input | Unshielded cable: <1 m for analog input
InsulationBetween input and internal logic at 500 V AC | Non-insulated between analogue input and internal logic | Non-insulated between analogue inputs | Between supply and ground at 1500 V AC | Between sensor power supply and ground at 500 V AC | Between input and ground at 500 V AC | Between output and ground at 1500 V AC | Between supply and internal logic at 2300 V AC | Between sensor power supply and internal logic at 500 V AC | Between output and internal logic at 2300 V AC | Between Ethernet terminal and internal logic at 500 V AC | Between supply and sensor power supply at 2300 V AC
Ký hiệuMarkingCE
Sensor power supply24 V DC at 250 mA supplied by the controller
Kiểu lắp đặtMounting supportTop hat type TH35-15 rail conforming to IEC 60715 | Top hat type TH35-7.5 rail conforming to IEC 60715 | plate or panel with fixing kit
Chiều caoHeight90 mm
Chiều sâuDepth70 mm
Chiều rộngWidth95 mm
Khối lượng tịnhNet weight0.346 kg
Môi trường & tiêu chuẩn
Tiêu chuẩnStandardsIEC 61131-2 | UL 508 | CAN/CSA C22.2 No. 213 | IACS E10 | ANSI/ISA 12-12-01
Chứng nhậnProduct certificationsRCM | ABS | LR | DNV-GL | EAC | cULus | CE | UKCA | cULus HazLoc
Environmental characteristicOrdinary and hazardous location
Resistance to electrostatic discharge8 kV in air conforming to IEC 61000-4-2 | 4 kV on contact conforming to IEC 61000-4-2
Resistance to electromagnetic fields10 V/m 80 MHz…1 GHz conforming to IEC 61000-4-3 | 3 V/m 1.4 GHz…2 GHz conforming to IEC 61000-4-3 | 1 V/m 2…2.7 GHz conforming to IEC 61000-4-3
Resistance to magnetic fields30 A/m 50/60 Hz conforming to IEC 61000-4-8
Resistance to fast transients2 kV (power lines) conforming to IEC 61000-4-4 | 2 kV (relay output) conforming to IEC 61000-4-4 | 1 kV (I/O) conforming to IEC 61000-4-4 | 1 kV (Ethernet line) conforming to IEC 61000-4-4 | 1 kV (serial link) conforming to IEC 61000-4-4
Surge withstand2 kV power lines (AC) common mode conforming to IEC 61000-4-5 | 2 kV relay output common mode conforming to IEC 61000-4-5 | 1 kV I/O common mode conforming to IEC 61000-4-5 | 1 kV shielded cable common mode conforming to IEC 61000-4-5 | 0.5 kV power lines (DC) differential mode conforming to IEC 61000-4-5 | 1 kV power lines (AC) differential mode conforming to IEC 61000-4-5 | 1 kV relay output differential mode conforming to IEC 61000-4-5 | 0.5 kV power lines (DC) common mode conforming to IEC 61000-4-5
Resistance to conducted disturbances10 V 0.15…80 MHz conforming to IEC 61000-4-6 | 3 V 0.1…80 MHz conforming to Marine specification (LR, ABS, DNV, GL) | 10 V spot frequency (2, 3, 4, 6.2, 8.2, 12.6, 16.5, 18.8, 22, 25 MHz) conforming to Marine specification (LR, ABS, DNV, GL)
Electromagnetic emissionConducted emissions - test level: 79 dBμV/m QP/66 dBμV/m AV ( power lines (AC)) at 0.15…0.5 MHz conforming to IEC 55011 | Conducted emissions - test level: 73 dBμV/m QP/60 dBμV/m AV ( power lines (AC)) at 0.5…300 MHz conforming to IEC 55011 | Conducted emissions - test level: 120…69 dBµV/m QP ( power lines) at 10…150 kHz conforming to IEC 55011 | Conducted emissions - test level: 63 dBμV/m QP ( power lines) at 1.5…30 MHz conforming to IEC 55011 | Radiated emissions - test level: 40 dBμV/m QP class A ( 10 m) at 30…230 MHz conforming to IEC 55011 | Conducted emissions - test level: 79…63 dBμV/m QP ( power lines) at 150…1500 kHz conforming to IEC 55011 | Radiated emissions - test level: 47 dBμV/m QP class A ( 10 m) at 200…1000 MHz conforming to IEC 55011
Immunity to microbreaks10 ms
Nhiệt độ môi trường khi vận hànhAmbient air temperature for operation-10…55 °C (horizontal installation) | -10…35 °C (vertical installation)
Nhiệt độ bảo quảnAmbient air temperature for storage-25…70 °C
Độ ẩm tương đốiRelative humidity10…95 %, without condensation (in operation) | 10…95 %, without condensation (in storage)
Cấp bảo vệ IPIP degree of protectionIP20 with protective cover in place
Cấp ô nhiễmPollution degree<= 2
Độ cao vận hànhOperating altitude0…2000 m
Storage altitude0…3000 m
Khả năng chịu rungVibration resistance3.5 mm at 5…8.4 Hz on symmetrical rail | 3.5 mm at 5…8.4 Hz on panel mounting | 1 gn at 8.4…150 Hz on symmetrical rail | 1 gn at 8.4…150 Hz on panel mounting
Khả năng chịu sốcShock resistance98 m/s² for 11 ms

Đóng gói

Cấp đóng góiĐơn vịSố lượngD × R × CKhối lượng
Cấp 1PCE113.9 × 14.0 × 10.6 cm300.0 g
Cấp 2S042060 × 40 × 30 cm6.983 kg
Cấp 3P1224080.0 × 120.0 × 105.0 cm162 kg

Tài liệu

Tài liệu mở tại website Schneider Electric.

Mã khác trong dòng Logic Controller - Modicon M221

Xem toàn bộ dòng Logic Controller - Modicon M221 (45 mã) →

Câu hỏi thường gặp

Hỏi đáp về TM221C16R

TM221C16R còn sản xuất không?

Có. Theo dữ liệu Schneider Electric, TM221C16R đang được sản xuất và bán thương mại. Fast Group kiểm tra hàng sẵn và thời gian giao khi báo giá.

Mã vạch (GTIN/EAN) của TM221C16R là gì?

GTIN-13 của TM221C16R là 3606480648694, dùng để đối chiếu nhãn hàng khi nhận hàng.

Mua bộ điều khiển lập trình (plc) Schneider TM221C16R chính hãng ở đâu?

Fast Group cung cấp bộ điều khiển lập trình (plc) Schneider TM221C16R chính hãng, CO/CQ đầy đủ theo lô, giao toàn quốc từ TP.HCM và Vũng Tàu. RFQ nhận trước 16:00 được phản hồi trong ngày làm việc.