
TM221M16TG Bộ điều khiển lập trình (PLC) Schneider Logic Controller - Modicon M221
Bộ điều khiển lập trình (PLC) Schneider Electric TM221M16TG thuộc dòng Logic Controller - Modicon M221: [Us] Điện áp nguồn định mức 24 V DC; loại ngõ ra số Transistor; số ngõ ra số 8 transistor 2 fast output; số ngõ vào số 8, discrete input 4 fast input theo IEC 61131-2 Type 1.
- [Us] Điện áp nguồn định mức
- 24 V DC
- Số ngõ vào số
- 8, discrete input 4 fast input conforming to IEC 61131-2 Type 1
- Số ngõ vào analog
- 2 at 0…10 V
- Loại ngõ ra số
- Transistor
- Số ngõ ra số
- 8 transistor 2 fast output
- Discrete output voltage
- 24 V DC
- Discrete output current
- 0.5 A
- GTIN / EAN-13
- 3606480611308
- Xuất xứ (tham khảo)
- Đài Loan
- Bảo hành hãng
- 18 tháng
- Hàng Schneider chính hãng
- CO/CQ đầy đủ
- Cấp hàng nhanh
Mô tả TM221M16TG
TM221M16TG là bộ điều khiển lập trình (PLC) thuộc dòng Logic Controller - Modicon M221 của Schneider Electric. Thông số định mức chính: [Us] Điện áp nguồn định mức 24 V DC; Số ngõ vào số 8, discrete input 4 fast input theo IEC 61131-2 Type 1; Số ngõ vào analog 2 ở 0…10 V; Loại ngõ ra số Transistor.
Bộ điều khiển lập trình (PLC) thực hiện logic điều khiển máy và dây chuyền theo chương trình, kết nối với cảm biến, cơ cấu chấp hành và mạng truyền thông.
Đặc tính kỹ thuật nổi bật
- Số ngõ ra số: 8 transistor 2 fast output
- Discrete output voltage: 24 V DC
- Discrete output current: 0.5 A
Lắp đặt
Về lắp đặt, TM221M16TG có lắp trên Top hat type TH35-15 rail theo IEC 60715, Top hat type TH35-7.5 rail theo IEC 60715, plate or panel with fixing kit; kích thước rộng × cao × sâu 70 mm × 90 mm × 70 mm; khối lượng tịnh 0.264 kg.
Môi trường làm việc
Điều kiện làm việc theo dữ liệu của hãng: cấp bảo vệ IP20 with protective cover in place; nhiệt độ môi trường khi vận hành -10…55 °C (horizontal installation), -10…35 °C (vertical installation); nhiệt độ bảo quản -25…70 °C; độ cao vận hành 0…2000 m; độ ẩm tương đối 10…95 %, without condensation (in operation), 10…95 %, without condensation (in storage); cấp ô nhiễm <= 2.
Tiêu chuẩn, chứng nhận và độ bền
TM221M16TG đáp ứng tiêu chuẩn IEC 61131-2, UL 508, CAN/CSA C22.2 No. 213, IACS E10, ANSI/ISA 12-12-01; chứng nhận ABS, LR, RCM, cULus, DNV-GL, EAC, …; độ bền cơ khí 20000000 cycles for transistor output.
Tình trạng sản xuất
TM221M16TG đang được Schneider Electric sản xuất và bán thương mại.
Đặt hàng
Thông tin đặt hàng: mã vạch GTIN-13 3606480611308; đóng gói cấp 1: 1 PCE; bảo hành hãng 18 tháng; xuất xứ tham khảo Đài Loan (theo dữ liệu thị trường quốc tế, có thể khác theo lô hàng về Việt Nam). Fast Group cung cấp hàng Schneider Electric chính hãng, CO/CQ đầy đủ theo lô; gửi mã TM221M16TG và số lượng qua form RFQ để nhận báo giá.
Thông số kỹ thuật TM221M16TG
Tên thông số giữ thuật ngữ tiếng Anh của Schneider (chữ nhỏ) để tiện đối chiếu datasheet.
Thông số chính
| Dòng sản phẩmRange of product | Modicon M221 |
|---|---|
| Loại sản phẩmProduct or component type | Logic controller |
| [Us] Điện áp nguồn định mức[Us] rated supply voltage | 24 V DC |
| Số ngõ vào sốDiscrete input number | 8, discrete input 4 fast input conforming to IEC 61131-2 Type 1 |
| Số ngõ vào analogAnalogue input number | 2 at 0…10 V |
| Loại ngõ ra sốDiscrete output type | Transistor |
| Số ngõ ra sốDiscrete output number | 8 transistor 2 fast output |
| Discrete output voltage | 24 V DC |
| Discrete output current | 0.5 A |
Thông số bổ sung
| Discrete I/O number | 16 |
|---|---|
| Maximum number of I/O expansion module | 7 (local I/O-Architecture) | 14 (remote I/O-Architecture) |
| Giới hạn điện áp nguồnSupply voltage limits | 20.4…28.8 V |
| Inrush current | 35 A |
| Maximum power consumption in W | 22 W at 24 V (with max number of I/O expansion module) | 3.2 W at 24 V (without I/O expansion module) |
| Dòng ra của bộ nguồnPower supply output current | 0.52 A 5 V for expansion bus | 0.49 A 24 V for expansion bus |
| Discrete input logic | Sink or source (positive/negative) |
| Discrete input voltage | 24 V |
| Discrete input voltage type | DC |
| Analogue input resolution | 10 bits |
| LSB value | 10 mV |
| Conversion time | 1 ms per channel + 1 controller cycle time for analogue input analog input |
| Permitted overload on inputs | +/- 30 V DC for 5 min (maximum) for analog input | +/- 13 V DC (permanent) for analog input |
| Voltage state 1 guaranteed | >= 15 V for input |
| Voltage state 0 guaranteed | <= 5 V for input |
| Discrete input current | 7 mA for discrete input | 5 mA for fast input |
| Input impedance | 100 kOhm for analog input | 3.4 kOhm for input | 4.9 kOhm for fast input |
| Response time | 35 µs turn-off, I2…I5 terminal(s) for input | 5 µs turn-on, I0, I1, I6, I7 terminal(s) for fast input | 35 µs turn-on, other terminals terminal(s) for input | 5 µs turn-off, I0, I1, I6, I7 terminal(s) for fast input | 100 µs turn-off, other terminals terminal(s) for input | 5 µs turn-on, turn-off, Q0…Q1 terminal(s) for output | 50 µs turn-on, turn-off, Q2…Q3 terminal(s) for output | 300 µs turn-on, turn-off, other terminals terminal(s) for output |
| Configurable filtering time | 0 ms for input | 3 ms for input | 12 ms for input |
| Discrete output logic | Positive logic (source) |
| Maximum current per output common | 4 A |
| Output frequency | 100 kHz for fast output (PWM/PLS mode) at Q0…Q1 | 5 kHz for output at Q2…Q3 | 0.1 kHz for output at Q4…Q6 |
| Absolute accuracy error | +/- 1 % of full scale for analog input |
| Maximum leakage current | 0.1 mA for transistor output |
| Maximum voltage drop | <1 V |
| Độ bền cơ khíMechanical durability | 20000000 cycles for transistor output |
| Maximum tungsten load | <12 W for output and fast output |
| Kiểu bảo vệProtection type | Short-circuit and overload protection with automatic reset | Short-circuit protection on output | Overload and short-circuit protection at 1 A |
| Thời gian resetReset time | 1 s automatic reset |
| Memory capacity | 256 kB for user application and data RAM with 10000 instructions | 256 kB for internal variables RAM |
| Data backed up | 256 kB built-in flash memory for backup of application and data |
| Data storage equipment | 2 GB SD card (optional) |
| Battery type | BR2032 or CR2032X lithium non-rechargeable |
| Backup time | 1 year at 25 °C (by interruption of power supply) |
| Execution time for 1 KInstruction | 0.3 ms for event and periodic task | 0.7 ms for other instruction |
| Execution time per instruction | 0.2 µs Boolean |
| Exct time for event task | 60 µs response time |
| Application structure | 1 cyclic auxiliary task | 1 configurable freewheeling/cyclic master task | 8 interrupt tasks |
| Maximum size of object areas | 8000 %MW memory words | 255 %C counters | 512 %KW constant words | 255 %TM timers | 512 %M memory bits |
| Realtime clock | With |
| Clock drift | <= 30 s/month at 25 °C |
| Regulation loop | Adjustable PID regulator up to 14 simultaneous loops |
| Positioning functions | Position PTO 2 axe(s)pulse/direction mode (100 kHz) | Position PTO 1 axe(s)CW/CCW mode (100 kHz) |
| Function available | PWM | PLS | Frequency generator |
| Counting input number | 4 fast input (HSC mode) at 100 kHz 32 bits |
| counter function | Single phase | A/B | Pulse/direction |
| Integrated connection type | USB port with mini B USB 2.0 connector | Non isolated serial link serial 1 with RJ45 connector and RS485 interface | Non isolated serial link serial 2 with RJ45 connector and RS232/RS485 interface |
| Supply | (serial 1)serial link supply: 5 V, <200 mA |
| Tốc độ truyềnTransmission rate | 1.2…115.2 kbit/s (115.2 kbit/s by default) for bus length of 15 m for RS485 | 1.2…115.2 kbit/s (115.2 kbit/s by default) for bus length of 3 m for RS232 | 480 Mbit/s for USB |
| Giao thức truyền thôngCommunication port protocol | USB port: USB - SoMachine-Network | Non isolated serial link: Modbus master/slave - RTU/ASCII or SoMachine-Network |
| Communication service | Modbus slave | Modbus master |
| Báo hiệu tại chỗLocal signalling | 1 LED (green) for PWR | 1 LED (green) for RUN | 1 LED (red) for module error (ERR) | 1 LED (green) for SD card access (SD) | 1 LED (red) for BAT | 1 LED (green) for SL1 | 1 LED (green) for SL2 | 1 LED per channel (green) for I/O state |
| Đấu nối điệnElectrical connection | terminal block, 3 terminal(s) for connecting the 24 V DC power supply | connector, 4 terminal(s) for analogue inputs | Mini B USB 2.0 connector for a programming terminal | removable spring terminal block, 10 terminal(s) for inputs | removable spring terminal block, 11 terminal(s) for outputs |
| Maximum cable distance between devices | Shielded cable: <10 m for fast input | Unshielded cable: <30 m for output | Unshielded cable: <30 m for digital input | Unshielded cable: <1 m for analog input | Shielded cable: <3 m for fast output |
| Insulation | Between input and internal logic at 500 V AC | Between fast input and internal logic at 500 V AC | Non-insulated between inputs | Between output and internal logic at 500 V AC | Between output groups at 500 V AC | Non-insulated between analogue input and internal logic | Non-insulated between analogue inputs | Between fast output and internal logic at 500 V AC | Non-insulated between outputs |
| Ký hiệuMarking | CE |
| Kiểu lắp đặtMounting support | Top hat type TH35-15 rail conforming to IEC 60715 | Top hat type TH35-7.5 rail conforming to IEC 60715 | plate or panel with fixing kit |
| Chiều caoHeight | 90 mm |
| Chiều sâuDepth | 70 mm |
| Chiều rộngWidth | 70 mm |
| Khối lượng tịnhNet weight | 0.264 kg |
Môi trường & tiêu chuẩn
| Tiêu chuẩnStandards | IEC 61131-2 | UL 508 | CAN/CSA C22.2 No. 213 | IACS E10 | ANSI/ISA 12-12-01 |
|---|---|
| Chứng nhậnProduct certifications | ABS | LR | RCM | cULus | DNV-GL | EAC | CE | UKCA | cULus HazLoc |
| Environmental characteristic | Ordinary and hazardous location |
| Resistance to electrostatic discharge | 8 kV in air conforming to IEC 61000-4-2 | 4 kV on contact conforming to IEC 61000-4-2 |
| Resistance to electromagnetic fields | 10 V/m 80 MHz…1 GHz conforming to IEC 61000-4-3 | 3 V/m 1.4 GHz…2 GHz conforming to IEC 61000-4-3 | 1 V/m 2…2.7 GHz conforming to IEC 61000-4-3 |
| Resistance to magnetic fields | 30 A/m 50/60 Hz conforming to IEC 61000-4-8 |
| Resistance to fast transients | 2 kV (power lines) conforming to IEC 61000-4-4 | 2 kV (relay output) conforming to IEC 61000-4-4 | 1 kV (I/O) conforming to IEC 61000-4-4 | 1 kV (Ethernet line) conforming to IEC 61000-4-4 | 1 kV (serial link) conforming to IEC 61000-4-4 |
| Surge withstand | 2 kV power lines (AC) common mode conforming to IEC 61000-4-5 | 2 kV relay output common mode conforming to IEC 61000-4-5 | 1 kV I/O common mode conforming to IEC 61000-4-5 | 1 kV shielded cable common mode conforming to IEC 61000-4-5 | 0.5 kV power lines (DC) differential mode conforming to IEC 61000-4-5 | 1 kV power lines (AC) differential mode conforming to IEC 61000-4-5 | 1 kV relay output differential mode conforming to IEC 61000-4-5 | 0.5 kV power lines (DC) common mode conforming to IEC 61000-4-5 |
| Resistance to conducted disturbances | 10 V 0.15…80 MHz conforming to IEC 61000-4-6 | 3 V 0.1…80 MHz conforming to Marine specification (LR, ABS, DNV, GL) | 10 V spot frequency (2, 3, 4, 6.2, 8.2, 12.6, 16.5, 18.8, 22, 25 MHz) conforming to Marine specification (LR, ABS, DNV, GL) |
| Electromagnetic emission | Conducted emissions - test level: 79 dBμV/m QP/66 dBμV/m AV ( power lines (AC)) at 0.15…0.5 MHz conforming to IEC 55011 | Conducted emissions - test level: 73 dBμV/m QP/60 dBμV/m AV ( power lines (AC)) at 0.5…300 MHz conforming to IEC 55011 | Conducted emissions - test level: 120…69 dBµV/m QP ( power lines) at 10…150 kHz conforming to IEC 55011 | Conducted emissions - test level: 63 dBμV/m QP ( power lines) at 1.5…30 MHz conforming to IEC 55011 | Radiated emissions - test level: 40 dBμV/m QP class A ( 10 m) at 30…230 MHz conforming to IEC 55011 | Conducted emissions - test level: 79…63 dBμV/m QP ( power lines) at 150…1500 kHz conforming to IEC 55011 | Radiated emissions - test level: 47 dBμV/m QP class A ( 10 m) at 200…1000 MHz conforming to IEC 55011 |
| Immunity to microbreaks | 10 ms |
| Nhiệt độ môi trường khi vận hànhAmbient air temperature for operation | -10…55 °C (horizontal installation) | -10…35 °C (vertical installation) |
| Nhiệt độ bảo quảnAmbient air temperature for storage | -25…70 °C |
| Độ ẩm tương đốiRelative humidity | 10…95 %, without condensation (in operation) | 10…95 %, without condensation (in storage) |
| Cấp bảo vệ IPIP degree of protection | IP20 with protective cover in place |
| Cấp ô nhiễmPollution degree | <= 2 |
| Độ cao vận hànhOperating altitude | 0…2000 m |
| Storage altitude | 0…3000 m |
| Khả năng chịu rungVibration resistance | 3.5 mm at 5…8.4 Hz on symmetrical rail | 3.5 mm at 5…8.4 Hz on panel mounting | 1 gn at 8.4…150 Hz on symmetrical rail | 1 gn at 8.4…150 Hz on panel mounting |
| Khả năng chịu sốcShock resistance | 147 m/s² for 11 ms |
Đóng gói
| Cấp đóng gói | Đơn vị | Số lượng | D × R × C | Khối lượng |
|---|---|---|---|---|
| Cấp 1 | PCE | 1 | 12.700 × 11.700 × 9.700 cm | 396.000 g |
| Cấp 2 | S04 | 24 | 60.000 × 40.000 × 30.000 cm | 10.606 kg |
Tài liệu
- Datasheet TM221M16TG (PDF)Datasheet
- Discover catalog for Modicon M221 Programmable logic controller for hardwired architecturesCatalog
- Discover Catalog EcoStruxure Machine Expert-Basic Programming software for Modicon M221 logic controllerCatalog
- Modicon M221 Logic Controller, Hardware GuideHướng dẫn sử dụng
- Modicon M221 Logic Controller, Programming GuideHướng dẫn sử dụng
- Modicon M221 Logic Controller, Advanced Functions Library GuideHướng dẫn sử dụng
- Modicon M221 Logic Controller, Hardware Guide - SoMachine BasicHướng dẫn sử dụng
- Modicon M221 Logic Controller, User GuideHướng dẫn sử dụng
- MCADID0000729_3D-CADCAD 2D/3D
- MCADID0000729_3D-simplified.stpCAD 2D/3D
- MCADID0000729_2D-back.dwgCAD 2D/3D
- Modicon, TM221, TM3, IACS, ABS, MarineChứng chỉ
- Modicon TM221 Certificate LR MarineChứng chỉ
- Modicon, TM221, Certificate, CSA, Ordinary LocationChứng chỉ
- Modicon DoC TM221Tuyên bố hợp chuẩn (DoC)
- RCM_SupplierDeclarationOfConformity_TM221_TM3Tuyên bố hợp chuẩn (DoC)
- Modicon M221 ControllersHồ sơ môi trường (PEP)
Tài liệu mở tại website Schneider Electric.
Mã khác trong dòng Logic Controller - Modicon M221
Hỏi đáp về TM221M16TG
TM221M16TG còn sản xuất không?
Có. Theo dữ liệu Schneider Electric, TM221M16TG đang được sản xuất và bán thương mại. Fast Group kiểm tra hàng sẵn và thời gian giao khi báo giá.
Mã vạch (GTIN/EAN) của TM221M16TG là gì?
GTIN-13 của TM221M16TG là 3606480611308, dùng để đối chiếu nhãn hàng khi nhận hàng.
Mua bộ điều khiển lập trình (plc) Schneider TM221M16TG chính hãng ở đâu?
Fast Group cung cấp bộ điều khiển lập trình (plc) Schneider TM221M16TG chính hãng, CO/CQ đầy đủ theo lô, giao toàn quốc từ TP.HCM và Vũng Tàu. RFQ nhận trước 16:00 được phản hồi trong ngày làm việc.