Hàng Schneider chính hãngCO/CQ đầy đủCấp hàng nhanhZalo / Hotline (+84) 938 888 958
ATV660C25Q4X1 Biến tần Schneider Altivar Process ATV600
Hình ảnh tham khảo © Schneider Electric
ATV660C25Q4X1 – ảnh 2
Schneider Electric · Altivar Process ATV600

ATV660C25Q4X1 Biến tần Schneider Altivar Process ATV600

Đang sản xuất

Biến tần Schneider Electric ATV660C25Q4X1 thuộc dòng Altivar Process ATV600: [Us] Điện áp nguồn định mức 380…415 V - 10…6 %; cấp bảo vệ IP IP23 theo IEC 61800-5-1; giao thức truyền thông EtherNet/IP, Modbus TCP, Modbus serial; kiểu làm mát đối lưu cưỡng bức.

Dùng cho
Asynchronous motors | Synchronous motors
Provided equipment
Enclosure PanelSeT SFN | Graphical operating panel in the enclosure door | Frequency inverter | Main switch | Line choke | Terminal block main supply | Terminal block motor
Colour of enclosure
Light grey (RAL 7035)
Cấp bảo vệ IP
IP23 conforming to IEC 61800-5-1
Giao thức truyền thông
EtherNet/IP | Modbus TCP | Modbus serial
Kiểu làm mát
Forced convection
Tần số nguồn
50/60 Hz +/-5 %
[Us] Điện áp nguồn định mức
380…415 V - 10…6 %
Bảo hành hãng
18 tháng
  • Hàng Schneider chính hãng
  • CO/CQ đầy đủ
  • Cấp hàng nhanh

Mô tả ATV660C25Q4X1

ATV660C25Q4X1 là biến tần thuộc dòng Altivar Process ATV600 của Schneider Electric. Ký hiệu thiết bị: ATV660. Thông số định mức chính: Dùng cho động cơ không đồng bộ, động cơ đồng bộ; Provided equipment Enclosure PanelSeT SFN, Graphical operating panel in the enclosure door, Frequency inverter, Main switch, Line choke, Terminal block main supply, …; Colour of enclosure Light grey (RAL 7035); Cấp bảo vệ IP IP23 theo IEC 61800-5-1.

Biến tần điều khiển tốc độ động cơ bằng cách thay đổi tần số và điện áp cấp, giúp tiết kiệm năng lượng và điều chỉnh tốc độ theo yêu cầu công nghệ.

Đặc tính kỹ thuật nổi bật

  • Ứng dụng: Process and utilities
  • Giao thức truyền thông: EtherNet/IP, Modbus TCP, Modbus serial
  • Kiểu làm mát: đối lưu cưỡng bức
  • Tần số nguồn: 50/60 Hz +/-5 %
  • [Us] Điện áp nguồn định mức: 380…415 V - 10…6 %
  • Số pha lưới: 3 pha
  • Điện áp ra: <= power supply voltage
  • Permissible temporary current boost: 1.1 x In during 60 s (tải thường), 1.5 x In during 60 s (tải nặng)
  • Speed drive output frequency: 0.1…500 Hz
  • Dòng ra liên tục: 477 A ở 2.5 kHz chế độ tải thường, 370 A ở 2.5 kHz chế độ tải nặng
  • Energy efficiency ratio: 0.98
  • Công suất tổn hao (W): 5750 W, total (tải thường), 4340 W, total (tải nặng), 730 W, control part (tải thường), 520 W, control part (tải nặng)

Lắp đặt

Về lắp đặt, ATV660C25Q4X1 có kích thước rộng × cao × sâu 600 mm × 2150 mm × 664 mm; khối lượng tịnh 400 kg.

Môi trường làm việc

Điều kiện làm việc theo dữ liệu của hãng: cấp bảo vệ IP23 theo IEC 61800-5-1; nhiệt độ môi trường khi vận hành -10…0 °C without derating (with option enclosure heating), 0…40 °C without derating, 40…50 °C with derating factor; nhiệt độ bảo quản -25…70 °C; độ cao vận hành < 1000 m without derating, 1000…2000 m with current derating 1 % per 100 m, 2000…3800 m with current derating 1 % per 100 m for TT earthing system, 2000…3800 m with current derating 1 % per 100 m for TN earthing system, 2000…3800 m with current derating 1 % per 100 m for IT earthing system, 3800…4800 m with current derating 1 % per 100 m for TT earthing system, …; độ ẩm tương đối 5…95 % without condensation theo IEC 60068-2-3; cấp ô nhiễm 2 theo IEC 61800-5-1.

Tiêu chuẩn, chứng nhận và độ bền

ATV660C25Q4X1 đáp ứng tiêu chuẩn IEC 60204-1, IEC 61800-2, IEC 61800-3, IEC 61800-5-1; chứng nhận ATEX, EAC, C-Tick.

Tình trạng sản xuất

ATV660C25Q4X1 đang được Schneider Electric sản xuất và bán thương mại.

Đặt hàng

Thông tin đặt hàng: đóng gói cấp 1: 1 PCE; bảo hành hãng 18 tháng. Fast Group cung cấp hàng Schneider Electric chính hãng, CO/CQ đầy đủ theo lô; gửi mã ATV660C25Q4X1 và số lượng qua form RFQ để nhận báo giá.

Thông số kỹ thuật ATV660C25Q4X1

Tên thông số giữ thuật ngữ tiếng Anh của Schneider (chữ nhỏ) để tiện đối chiếu datasheet.

Thông số chính

Dòng sản phẩmRange of productAltivar Process ATV600
Ứng dụngProduct specific applicationProcess and utilities
Loại sản phẩmProduct or component typeVariable speed drive
Ký hiệu thiết bịDevice short nameATV660
Dùng choProduct destinationAsynchronous motors | Synchronous motors
Provided equipmentEnclosure PanelSeT SFN | Graphical operating panel in the enclosure door | Frequency inverter | Main switch | Line choke | Terminal block main supply | Terminal block motor
Colour of enclosureLight grey (RAL 7035)
Cấp bảo vệ IPIP degree of protectionIP23 conforming to IEC 61800-5-1
Giao thức truyền thôngCommunication port protocolEtherNet/IP | Modbus TCP | Modbus serial
Kiểu làm mátType of coolingForced convection
Tần số nguồnSupply frequency50/60 Hz +/-5 %
[Us] Điện áp nguồn định mức[Us] rated supply voltage380…415 V - 10…6 %
Số pha lướiNetwork number of phases3 phases
Điện áp raOutput voltage<= power supply voltage
Permissible temporary current boost1.1 x In during 60 s (normal duty) | 1.5 x In during 60 s (heavy duty)
Speed drive output frequency0.1…500 Hz
Dòng ra liên tụcContinuous output current477 A at 2.5 kHz for normal duty | 370 A at 2.5 kHz for heavy duty
Energy efficiency ratio0.98
Công suất tổn hao (W)Power dissipation in W5750 W, total (normal duty) | 4340 W, total (heavy duty) | 730 W, control part (normal duty) | 520 W, control part (heavy duty)
Volume of cooling air140 m3/h for control | 1160 m3/h for power
Độ ồnNoise level70 dB conforming to 86/188/EEC - physical agents (noise) directive
Công suất động cơ (kW)Motor power kW250 kW for normal duty | 200 kW for heavy duty
Dòng ngắn mạch dự kiếnProspective line Isc50 kA for 100 ms
Motor recommanded cable cross section2 x (3 x 150 mm²) (normal duty) | 3 x (3 x 95 mm²) (normal duty) | 2 x (3 x 120 mm²) (heavy duty) | 3 x (3 x 70 mm²) (heavy duty)
Card tùy chọnOption cardSlot A: communication module, Profibus DP V1 | Slot A: communication module, PROFINET | Slot A: communication module, DeviceNet | Slot A: communication module, Modbus TCP/EtherNet/IP | Slot A: communication module, CANopen daisy chain RJ45 | Slot A: communication module, CANopen SUB-D 9 | Slot A: communication module, CANopen screw terminals | Slot A/slot B: digital and analog I/O extension module | Slot A/slot B: output relay extension module
Safety functionSTO (safe torque off), level SIL 3 for <= 100 ms
Bộ lọc EMCEMC filterIntegrated conforming to IEC 61800-3, category C3, shielded cable with 150 m | Integrated conforming to IEC 61800-3, category C4, unshielded cable with 250 m
Thông số bổ sung
Số ngõ vào sốDiscrete input number8
Kiểu bảo vệProtection typeMotor: thermal protection | Motor: safe torque off | Motor: motor phase break | Drive: thermal protection | Drive: safe torque off | Drive: overheating | Drive: overcurrent (between output phases and earth) | Drive: overload (output) | Drive: short-circuit protection | Drive: motor phase break | Drive: overvoltage (DC bus) | Drive: line supply overvoltage | Drive: line supply undervoltage | Drive: line supply phase loss | Drive: overspeed | Drive: break on the control circuit | Drive: short-circuit protection with semi-conductor fuse (main supply) | Drive: fan monitoring
Loại ngõ vào sốDiscrete input typeDI1…DI6 programmable, 24 V DC ( 2.2 kOhm
Frequency resolutionDisplay unit: 0.1 Hz | Analog input: 0.012/50 Hz
Connector typeRJ45 (on the control block) for Modbus serial | RJ45 (on the control block) for Ethernet IP/Modbus TCP
Discrete input logic16 preset speeds
Giao diện vật lýPhysical interface2-wire RS 485 for Modbus serial
Transmission frameRTU for Modbus serial
Tốc độ truyềnTransmission rate10/100 Mbit/s for Ethernet IP/Modbus TCP | 4.8, 9.6, 19.2, 38.4 kbit/s for Modbus serial
Exchange modeHalf duplex, full duplex, autonegotiation Ethernet IP/Modbus TCP
Data format8 bits, configurable odd, even or no parity for Modbus serial
Type of polarizationNo impedance for Modbus serial
Số ngõ vào analogAnalogue input number3
Number of addresses1…247 for Modbus serial
SupplyExternal supply for digital inputs: 24 V DC (10…30 V), <1.25 mA, protection type: overload and short-circuit protection | Internal supply for reference potentiometer (1 to 10 kOhm): 10.5 V DC +/- 5 %, <10 mA, protection type: overload and short-circuit protection | Internal supply for digital inputs and STO: 24 V DC (21…27 V), <200 mA, protection type: overload and short-circuit protection
Loại ngõ vào analogAnalogue input typeAI1, AI2, AI3 software-configurable voltage: 0…10 V DC, impedance: 30 kOhm, resolution 12 bits | AI1, AI2, AI3 software-configurable current: 0…20 mA, impedance: 250 Ohm, resolution 12 bits
Báo hiệu tại chỗLocal signallingLCD display unit front door operation function, status and configuration
Input compatibilityDI1…DI6: discrete input level 1 PLC conforming to IEC 61131-2 | DI5, DI6: discrete input level 1 PLC conforming to IEC 65A-68 | STOA, STOB: discrete input level 1 PLC conforming to IEC 61131-2
Analogue output number2
Discrete input logicPositive logic (source) (DI1…DI6), 11 V (state 1) | Negative logic (sink) (DI1…DI6), > 16 V (state 0), 2.5 V (state 1) | Positive logic (source) (STOA, STOB), 11 V (state 1)
Sampling duration2 ms +/- 0.5 ms (DI1…DI4) - discrete input | 5 ms +/- 1 ms (DI5, DI6) - discrete input | 5 ms +/- 1 ms (AI1, AI2, AI3) - analog input | 10 ms +/- 1 ms (AQ1, AQ2) - analog output
Loại ngõ ra analogAnalogue output typeSoftware-configurable voltage AQ1, AQ2: 0…10 V DC impedance 470 Ohm, resolution 10 bits | Software-configurable current AQ1, AQ2: 0…20 mA, resolution 10 bits
Accuracy+/- 0.6 % AI1, AI2, AI3 for a temperature variation 60 °C analog input | +/- 1 % AQ1, AQ2 for a temperature variation 60 °C analog output
Linearity errorAI1, AI2, AI3: +/- 0.15 % of maximum value for analog input | AQ1, AQ2: +/- 0.2 % for analog output
Relay output number3
Refresh timeRelay output (R1, R2, R3): 5 ms (+/- 0.5 ms)
IsolationBetween power and control terminals
Relay output typeConfigurable relay logic R1: fault relay NO/NC electrical durability 100000 cycles | Configurable relay logic R2: sequence relay NO electrical durability 100000 cycles | Configurable relay logic R3: sequence relay NO electrical durability 100000 cycles
Dòng đóng cắt tối đaMaximum switching currentRelay output R1, R2, R3 on resistive load, cos phi = 1: 3 A at 250 V AC | Relay output R1, R2, R3 on resistive load, cos phi = 1: 3 A at 30 V DC | Relay output R1, R2, R3 on inductive load, cos phi = 0.4 and L/R = 7 ms: 2 A at 250 V AC | Relay output R1, R2, R3 on inductive load, cos phi = 0.4 and L/R = 7 ms: 2 A at 30 V DC
Dòng đóng cắt tối thiểuMinimum switching currentRelay output R1, R2, R3: 5 mA at 24 V DC
Method of accessSlave Modbus TCP
Chế độ điều khiển động cơ không đồng bộAsynchronous motor control profileVariable torque standard | Constant torque standard | Optimized torque mode
Chế độ điều khiển động cơ đồng bộSynchronous motor control profilePermanent magnet motor
Dốc tăng / giảm tốcAcceleration and deceleration rampsS, U or customized | Linear adjustable separately from 0.01 to 9000 s
Bù trượt động cơMotor slip compensationAutomatic whatever the load | Adjustable | Not available in permanent magnet motor law | Can be suppressed
Tần số đóng cắtSwitching frequency2…8 kHz adjustable with derating factor
Tần số đóng cắt danh địnhNominal switching frequency2.5 kHz
Braking to standstillBy DC injection
Dòng điện đầu vàoLine current432 A at 400 V (normal duty) | 353 A at 400 V (heavy duty)
Công suất biểu kiếnApparent power299 kVA at 400 V (normal duty) | 244 kVA at 400 V (heavy duty)
Maximum transient current525 A during 60 s per 10 min (normal duty) | 555 A during 60 s per 10 min (heavy duty)
Bảo vệ ngắn mạchShort-circuit protectionInternal: 315 A 2 aR fuse | Upstream: 500 A gG fuse (normal duty) | Upstream: 400 A gG fuse (heavy duty)
Đấu nối điệnElectrical connectionRemovable screw terminals, clamping capacity: 0.5…1.5 mm² for control | M12 bar for main supply | M12 bar for motor
cable entryBottom
Chiều rộngWidth600 mm
Chiều caoHeight2150 mm
Chiều sâuDepth664 mm
Khối lượng tịnhNet weight400 kg
Môi trường & tiêu chuẩn
Điện trở cách điệnInsulation resistance> 1 MOhm 500 V DC for 1 minute to earth
Cấp ô nhiễmPollution degree2 conforming to IEC 61800-5-1
Khả năng chịu rungVibration resistance1.5 mm peak to peak (f= 3…10 Hz) conforming to IEC 60068-2-6 | 0.6 gn (f= 10…200 Hz) conforming to IEC 60068-2-6 | 3M3 conforming to IEC 60721-3-3
Khả năng chịu sốcShock resistance4 gn for 11 ms conforming to IEC 60068-2-27 | 3M2 conforming to IEC 60721-3-3
Độ ẩm tương đốiRelative humidity5…95 % without condensation conforming to IEC 60068-2-3
Độ cao vận hànhOperating altitude< 1000 m without derating | 1000…2000 m with current derating 1 % per 100 m | 2000…3800 m with current derating 1 % per 100 m for TT earthing system | 2000…3800 m with current derating 1 % per 100 m for TN earthing system | 2000…3800 m with current derating 1 % per 100 m for IT earthing system | 3800…4800 m with current derating 1 % per 100 m for TT earthing system | 3800…4800 m with current derating 1 % per 100 m for TN earthing system
Environmental characteristicChemical pollution resistance class 3C3 conforming to IEC 60721-3-3 | Dust pollution resistance class 3S3 conforming to IEC 60721-3-3 | Humidity resistant class 3K3 conforming to IEC 60721-3-3
Vị trí lắp đặtOperating positionVertical +/- 10 degree
Chứng nhậnProduct certificationsATEX | EAC | C-Tick
Ký hiệuMarkingCE
Tiêu chuẩnStandardsIEC 60204-1 | IEC 61800-2 | IEC 61800-3 | IEC 61800-5-1
Maximum THDI<47 % full load conforming to IEC 61000-3-12
Assembly styleIn floor-standing enclosure compact version
Tương thích điện từ (EMC)Electromagnetic compatibilityElectrostatic discharge immunity test level 3 conforming to IEC 61000-4-2 | Radiated radio-frequency electromagnetic field immunity test level 3 conforming to IEC 61000-4-3 | Electrical fast transient/burst immunity test level 4 conforming to IEC 61000-4-4 | 1.2/50 µs - 8/20 µs surge immunity test level 3 conforming to IEC 61000-4-5 | Conducted radio-frequency immunity test level 3 conforming to IEC 61000-4-6
Cấp quá ápOvervoltage categoryIII
Nhiệt độ môi trường khi vận hànhAmbient air temperature for operation-10…0 °C without derating (with option enclosure heating) | 0…40 °C without derating | 40…50 °C with derating factor
Nhiệt độ bảo quảnAmbient air temperature for storage-25…70 °C

Đóng gói

Cấp đóng góiĐơn vịSố lượngD × R × CKhối lượng
Cấp 1PCE190 × 80 × 236 cm430 kg

Tài liệu

Tài liệu mở tại website Schneider Electric.

Video

Mã khác trong dòng Altivar Process ATV600

Xem toàn bộ dòng Altivar Process ATV600 (184 mã) →

Câu hỏi thường gặp

Hỏi đáp về ATV660C25Q4X1

ATV660C25Q4X1 còn sản xuất không?

Có. Theo dữ liệu Schneider Electric, ATV660C25Q4X1 đang được sản xuất và bán thương mại. Fast Group kiểm tra hàng sẵn và thời gian giao khi báo giá.

Mua biến tần Schneider ATV660C25Q4X1 chính hãng ở đâu?

Fast Group cung cấp biến tần Schneider ATV660C25Q4X1 chính hãng, CO/CQ đầy đủ theo lô, giao toàn quốc từ TP.HCM và Vũng Tàu. RFQ nhận trước 16:00 được phản hồi trong ngày làm việc.