Hàng Schneider chính hãngCO/CQ đầy đủCấp hàng nhanhZalo / Hotline (+84) 938 888 958
ATV630U30M3 Biến tần Schneider Altivar Process ATV600
Hình ảnh tham khảo © Schneider Electric
ATV630U30M3 – ảnh 2ATV630U30M3 – ảnh 3ATV630U30M3 – ảnh 4ATV630U30M3 – ảnh 5ATV630U30M3 – ảnh 6ATV630U30M3 – ảnh 7ATV630U30M3 – ảnh 8
Schneider Electric · Altivar Process ATV600

ATV630U30M3 Biến tần Schneider Altivar Process ATV600

Đang sản xuất

Biến tần Schneider Electric ATV630U30M3 thuộc dòng Altivar Process ATV600: dòng ra định mức 13.7 A; [Us] Điện áp nguồn định mức 200…240 V - 15…10 %; [Us] Điện áp nguồn định mức 200…240 V; dung sai điện áp lưới 10 %.

Biến thể
Standard version
Cách lắp
Wall mount
Giao thức truyền thông
Modbus TCP | Ethernet | Modbus serial
[Us] Điện áp nguồn định mức
200…240 V - 15…10 %
[Us] Điện áp nguồn định mức
200…240 V
Dung sai điện áp lưới
10 %
Dung sai tần số lưới
5 %
Dòng ra định mức
13.7 A
GTIN / EAN-13
3606480761645
Xuất xứ (tham khảo)
Indonesia
Bảo hành hãng
18 tháng
  • Hàng Schneider chính hãng
  • CO/CQ đầy đủ
  • Cấp hàng nhanh

Mô tả ATV630U30M3

ATV630U30M3 là biến tần thuộc dòng Altivar Process ATV600 của Schneider Electric. Ký hiệu thiết bị: ATV630. Thông số định mức chính: Biến thể phiên bản tiêu chuẩn; Cách lắp treo tường; Giao thức truyền thông Modbus TCP, Ethernet, Modbus serial; [Us] Điện áp nguồn định mức 200…240 V - 15…10 %.

Biến tần điều khiển tốc độ động cơ bằng cách thay đổi tần số và điện áp cấp, giúp tiết kiệm năng lượng và điều chỉnh tốc độ theo yêu cầu công nghệ.

Đặc tính kỹ thuật nổi bật

  • Ứng dụng: Process and utilities
  • Dung sai điện áp lưới: 10 %
  • Dung sai tần số lưới: 5 %
  • Dòng ra định mức: 13.7 A
  • Cấp bảo vệ IP: IP21
  • Dùng cho: động cơ không đồng bộ, động cơ đồng bộ
  • Bộ lọc EMC: Without EMC filter
  • Cấp bảo vệ IP: IP21 theo IEC 61800-5-1, IP21 theo IEC 60529
  • Cấp bảo vệ: UL type 1 theo UL 508C
  • Kiểu làm mát: đối lưu cưỡng bức
  • Tần số nguồn: 50…60 Hz - 5…5 %
  • Công suất động cơ (kW): 3 kW (tải thường), 2.2 kW (tải nặng)

Lắp đặt

Về lắp đặt, ATV630U30M3 có kiểu lắp treo tường; kích thước rộng × cao × sâu 144 mm × 350 mm × 203 mm; khối lượng tịnh 4.5 kg.

Môi trường làm việc

Điều kiện làm việc theo dữ liệu của hãng: cấp bảo vệ IP21; nhiệt độ môi trường khi vận hành -15…50 °C (without derating), 50…60 °C (with derating factor); nhiệt độ bảo quản -40…70 °C; độ cao vận hành <= 1000 m without derating, 1000…4800 m with current derating 1 % per 100 m; độ ẩm tương đối 5…95 % without condensation theo IEC 60068-2-3; cấp ô nhiễm 2 theo IEC 61800-5-1.

Tiêu chuẩn, chứng nhận và độ bền

ATV630U30M3 đáp ứng tiêu chuẩn UL 508C, IEC 61800-3, IEC 61800-3 environment 1 category C2, EN/IEC 61800-3 environment 2 category C3, IEC 61800-5-1, IEC 61000-3-12, …; chứng nhận DNV-GL, TÜV, ATEX zone 2/22, ATEX INERIS, CSA, UL.

Tình trạng sản xuất

ATV630U30M3 đang được Schneider Electric sản xuất và bán thương mại.

Đặt hàng

Thông tin đặt hàng: mã vạch GTIN-13 3606480761645; đóng gói cấp 1: 1 PCE; bảo hành hãng 18 tháng; xuất xứ tham khảo Indonesia (theo dữ liệu thị trường quốc tế, có thể khác theo lô hàng về Việt Nam). Fast Group cung cấp hàng Schneider Electric chính hãng, CO/CQ đầy đủ theo lô; gửi mã ATV630U30M3 và số lượng qua form RFQ để nhận báo giá.

Thông số kỹ thuật ATV630U30M3

Tên thông số giữ thuật ngữ tiếng Anh của Schneider (chữ nhỏ) để tiện đối chiếu datasheet.

Thông số chính

Dòng sản phẩmRange of productAltivar Process ATV600
Ứng dụngProduct specific applicationProcess and utilities
Loại sản phẩmProduct or component typeVariable speed drive
Biến thểVariantStandard version
Ký hiệu thiết bịDevice short nameATV630
Cách lắpMounting modeWall mount
Giao thức truyền thôngCommunication port protocolModbus TCP | Ethernet | Modbus serial
[Us] Điện áp nguồn định mức[Us] rated supply voltage200…240 V - 15…10 %
[Us] Điện áp nguồn định mức[Us] rated supply voltage200…240 V
Dung sai điện áp lướiRelative symmetric mains voltage tolerance10 %
Dung sai tần số lướiRelative symmetric network frequency tolerance5 %
Dòng ra định mứcnominal output current13.7 A
Cấp bảo vệ IPIP degree of protectionIP21
Dùng choProduct destinationAsynchronous motors | Synchronous motors
Bộ lọc EMCEMC filterWithout EMC filter
Cấp bảo vệ IPIP degree of protectionIP21 conforming to IEC 61800-5-1 | IP21 conforming to IEC 60529
Cấp bảo vệDegree of protectionUL type 1 conforming to UL 508C
Kiểu làm mátType of coolingForced convection
Tần số nguồnSupply frequency50…60 Hz - 5…5 %
Công suất động cơ (kW)Motor power kW3 kW (normal duty) | 2.2 kW (heavy duty)
Công suất động cơ (HP)Motor power hp3 hp heavy duty | 4 hp normal duty
Dòng điện đầu vàoLine current11.5 A at 200 V (normal duty) | 9.9 A at 240 V (normal duty) | 8.7 A at 200 V (heavy duty) | 7.6 A at 240 V (heavy duty)
Dòng ra liên tụcContinuous output current13.7 A at 4 kHz for normal duty | 11.2 A at 4 kHz for heavy duty
Speed drive output frequency0.1…500 Hz
Safety functionSTO (safe torque off) SIL 3
Card tùy chọnOption cardSlot A: communication module, Profibus DP V1 | Slot A: communication module, PROFINET | Slot A: communication module, DeviceNet | Slot A: communication module, Modbus TCP/EtherNet/IP | Slot A: communication module, CANopen daisy chain RJ45 | Slot A: communication module, CANopen SUB-D 9 | Slot A: communication module, CANopen screw terminals | Slot A/slot B: digital and analog I/O extension module | Slot A/slot B: output relay extension module | Slot A: communication module, Ethernet IP/Modbus TCP/MD-Link | Communication module, BACnet MS/TP | Communication module, Ethernet Powerlink
Thông số bổ sung
Số ngõ vào sốDiscrete input number8
Loại ngõ vào sốDiscrete input typeDI7, DI8 programmable as pulse input: 0…30 kHz, 24 V DC (<= 30 V)
Discrete input logic16 preset speeds
Số ngõ ra sốDiscrete output number0
Loại ngõ ra sốDiscrete output typeRelay outputs R1A, R1B, R1C 250 V AC 3000 mA | Relay outputs R1A, R1B, R1C 30 V DC 3000 mA | Relay outputs R2A, R2C 250 V AC 5000 mA | Relay outputs R2A, R2C 30 V DC 5000 mA | Relay outputs R3A, R3C 250 V AC 5000 mA | Relay outputs R3A, R3C 30 V DC 5000 mA
Số ngõ vào analogAnalogue input number3
Loại ngõ vào analogAnalogue input typeAI1, AI2, AI3 software-configurable voltage: 0…10 V DC, impedance: 31.5 kOhm, resolution 12 bits | AI1, AI2, AI3 software-configurable current: 0…20 mA, impedance: 250 Ohm, resolution 12 bits | AI2 voltage analog input: - 10…10 V DC, impedance: 31.5 kOhm, resolution 12 bits
Analogue output number2
Loại ngõ ra analogAnalogue output typeSoftware-configurable voltage AQ1, AQ2: 0…10 V DC impedance 470 Ohm, resolution 10 bits | Software-configurable current AQ1, AQ2: 0…20 mA, resolution 10 bits | Software-configurable current DQ-, DQ+: 30 V DC | Software-configurable current DQ-, DQ+: 100 mA
Relay output number3
Relay output typeConfigurable relay logic R1: fault relay NO/NC electrical durability 100000 cycles | Configurable relay logic R2: sequence relay NO electrical durability 100000 cycles | Configurable relay logic R3: sequence relay NO electrical durability 100000 cycles
Dòng đóng cắt tối đaMaximum switching currentRelay output R1, R2, R3 on resistive load, cos phi = 1: 3 A at 250 V AC | Relay output R1, R2, R3 on resistive load, cos phi = 1: 3 A at 30 V DC | Relay output R1, R2, R3 on inductive load, cos phi = 0.4 and L/R = 7 ms: 2 A at 250 V AC | Relay output R1, R2, R3 on inductive load, cos phi = 0.4 and L/R = 7 ms: 2 A at 30 V DC
Dòng đóng cắt tối thiểuMinimum switching currentRelay output R1, R2, R3: 5 mA at 24 V DC
Số pha lướiNetwork number of phases3 phases
Giao diện vật lýPhysical interfaceEthernet | 2-wire RS 485
Method of accessSlave Modbus TCP
Tốc độ truyềnTransmission rate10, 100 Mbits | 4800 bps, 9600 bps, 19200 bps, 38.4 Kbps
Transmission frameRTU
Điện áp raOutput voltage<= power supply voltage
Permissible temporary current boost1.1 x In during 60 s (normal duty) | 1.5 x In during 60 s (heavy duty)
Data format8 bits, configurable odd, even or no parity
Type of polarizationNo impedance
Frequency resolutionDisplay unit: 0.1 Hz | Analog input: 0.012/50 Hz
Đấu nối điệnElectrical connectionControl: removable screw terminals 0.5…1.5 mm²/20 AWG…16 AWG | Motor: screw terminal 4…6 mm²/12 AWG…10 AWG | Line side: screw terminal 2.5…6 mm²/14 AWG…10 AWG
Connector typeRJ45 (on the remote graphic terminal) for Ethernet/Modbus TCP | RJ45 (on the remote graphic terminal) for Modbus serial
Exchange modeHalf duplex, full duplex, autonegotiation Ethernet/Modbus TCP
Number of addresses1…247 for Modbus serial
SupplyExternal supply for digital inputs: 24 V DC (19…30 V), <1.25 mA, protection type: overload and short-circuit protection | Internal supply for reference potentiometer (1 to 10 kOhm): 10.5 V DC +/- 5 %, <10 mA, protection type: overload and short-circuit protection | Internal supply for digital inputs and STO: 24 V DC (21…27 V), <200 mA, protection type: overload and short-circuit protection
Báo hiệu tại chỗLocal signalling3 LEDs for local diagnostic | 3 LEDs (dual colour) for embedded communication status | 4 LEDs (dual colour) for communication module status | 1 LED (red) for presence of voltage
Input compatibilityDI1…DI6: discrete input level 1 PLC conforming to IEC 61131-2 | DI5, DI6: discrete input level 1 PLC conforming to IEC 65A-68 | STOA, STOB: discrete input level 1 PLC conforming to IEC 61131-2
Discrete input logicPositive logic (source) (DI1…DI8), 11 V (state 1) | Negative logic (sink) (DI1…DI8), > 16 V (state 0), < 10 V (state 1)
Sampling duration2 ms +/- 0.5 ms (DI1…DI4) - discrete input | 5 ms +/- 1 ms (DI5, DI6) - discrete input | 5 ms +/- 0.1 ms (AI1, AI2, AI3) - analog input | 10 ms +/- 1 ms (AO1) - analog output
Accuracy+/- 0.6 % AI1, AI2, AI3 for a temperature variation 60 °C analog input | +/- 1 % AO1, AO2 for a temperature variation 60 °C analog output
Linearity errorAI1, AI2, AI3: +/- 0.15 % of maximum value for analog input | AO1, AO2: +/- 0.2 % for analog output
Refresh timeRelay output (R1, R2, R3): 5 ms (+/- 0.5 ms)
IsolationBetween power and control terminals
Discrete and process manufacturingBuilding - HVAC compressor centrifugal | Food and beverage processing other application | Mining mineral and metal fan | Mining mineral and metal pump | Oil and gas fan | Water and waste water other application | Building - HVAC screw compressor | Food and beverage processing pump | Food and beverage processing fan | Food and beverage processing atomization | Oil and gas electro submersible pump (ESP) | Oil and gas water injection pump | Oil and gas jet fuel pump | Oil and gas compressor for refinery | Water and waste water centrifuge pump | Water and waste water positive displacement pump | Water and waste water electro submersible pump (ESP) | Water and waste water screw pump | Water and waste water lobe compressor | Water and waste water screw compressor | Water and waste water compressor centrifugal | Water and waste water fan | Water and waste water conveyor | Water and waste water mixer
Power range2.2…3 kW at 200…240 V 3 phases
Enclosure mountingWall mounted
4 quadrant operation possibleFalse
Chế độ điều khiển động cơ không đồng bộAsynchronous motor control profileConstant torque standard | Optimized torque mode | Variable torque standard
Chế độ điều khiển động cơ đồng bộSynchronous motor control profilePermanent magnet motor | Synchronous reluctance motor
Maximum output frequency500 kHz
Dốc tăng / giảm tốcAcceleration and deceleration rampsLinear adjustable separately from 0.01…9999 s
Bù trượt động cơMotor slip compensationAdjustable | Can be suppressed | Not available in permanent magnet motor law | Automatic whatever the load
Tần số đóng cắtSwitching frequency2…12 kHz adjustable | 4…12 kHz with derating factor
Tần số đóng cắt danh địnhNominal switching frequency4 kHz
Braking to standstillBy DC injection
Brake chopper integratedFalse
Maximum input current11.5 A
Maximum output voltage240.0 V
Công suất biểu kiếnApparent power4.1 kVA at 240 V (normal duty) | 3.2 kVA at 240 V (heavy duty)
Maximum transient current16.8 A during 60 s (heavy duty) | 15.1 A during 60 s (normal duty)
Tần số lướiNetwork frequency50…60 Hz
Dòng ngắn mạch dự kiếnProspective line Isc50 kA
Base load current at high overload11.2 A
Base load current at low overload13.7 A
Công suất tổn hao (W)Power dissipation in WNatural convection: 34 W at 200 V, switching frequency 4 kHz | Forced convection: 104 W at 200 V, switching frequency 4 kHz
With safety function Safely Limited Speed (SLS)False
With safety function Safe brake management (SBC/SBT)False
With safety function Safe Operating Stop (SOS)False
With safety function Safe Position (SP)False
With safety function Safe programmable logicFalse
With safety function Safe Speed Monitor (SSM)False
With safety function Safe Stop 1 (SS1)False
With sft fct Safe Stop 2 (SS2)False
With safety function Safe torque off (STO)True
With safety function Safely Limited Position (SLP)False
With safety function Safe Direction (SDI)False
Kiểu bảo vệProtection typeThermal protection: motor | Safe torque off: motor | Motor phase break: motor | Thermal protection: drive | Safe torque off: drive | Overheating: drive | Overcurrent between output phases and earth: drive | Overload of output voltage: drive | Short-circuit protection: drive | Motor phase break: drive | Overvoltages on the DC bus: drive | Line supply overvoltage: drive | Line supply undervoltage: drive | Line supply phase loss: drive | Overspeed: drive | Break on the control circuit: drive
Số lượng mỗi bộQuantity per set1
Chiều rộngWidth144 mm
Chiều caoHeight350 mm
Chiều sâuDepth203 mm
Khối lượng tịnhNet weight4.5 kg
Môi trường & tiêu chuẩn
Điện trở cách điệnInsulation resistance> 1 MOhm 500 V DC for 1 minute to earth
Độ ồnNoise level54.5 dB conforming to 86/188/EEC
Cấp ô nhiễmPollution degree2 conforming to IEC 61800-5-1
Khả năng chịu rungVibration resistance1.5 mm peak to peak (f= 2…13 Hz) conforming to IEC 60068-2-6 | 1 gn (f= 13…200 Hz) conforming to IEC 60068-2-6
Khả năng chịu sốcShock resistance15 gn for 11 ms conforming to IEC 60068-2-27
Độ ẩm tương đốiRelative humidity5…95 % without condensation conforming to IEC 60068-2-3
Nhiệt độ môi trường khi vận hànhAmbient air temperature for operation-15…50 °C (without derating) | 50…60 °C (with derating factor)
Độ cao vận hànhOperating altitude<= 1000 m without derating | 1000…4800 m with current derating 1 % per 100 m
Vị trí lắp đặtOperating positionVertical +/- 10 degree
Chứng nhậnProduct certificationsDNV-GL | TÜV | ATEX zone 2/22 | ATEX INERIS | CSA | UL
Ký hiệuMarkingCE
Tiêu chuẩnStandardsUL 508C | IEC 61800-3 | IEC 61800-3 environment 1 category C2 | EN/IEC 61800-3 environment 2 category C3 | IEC 61800-5-1 | IEC 61000-3-12 | IEC 60721-3 | IEC 61508 | IEC 13849-1
Maximum THDI<48 % full load conforming to IEC 61000-3-12
Tương thích điện từ (EMC)Electromagnetic compatibilityElectrostatic discharge immunity test level 3 conforming to IEC 61000-4-2 | Radiated radio-frequency electromagnetic field immunity test level 3 conforming to IEC 61000-4-3 | Electrical fast transient/burst immunity test level 4 conforming to IEC 61000-4-4 | 1.2/50 µs - 8/20 µs surge immunity test level 3 conforming to IEC 61000-4-5 | Conducted radio-frequency immunity test level 3 conforming to IEC 61000-4-6
Environmental class (during operation)Class 3C3 according to IEC 60721-3-3 | Class 3S3 according to IEC 60721-3-3
Maximum acceleration under shock impact (during operation)150 m/s² at 11 ms
Maximum acceleration under vibrational stress (during operation)10 m/s² at 13…200 Hz
Maximum deflection under vibratory load (during operation)1.5 mm at 2…13 Hz
Permitted relative humidity (during operation)Class 3K5 according to EN 60721-3
Volume of cooling air38 m3/h
Cấp quá ápOvervoltage categoryIII
Regulation loopAdjustable PID regulator
Độ ồnNoise level54.5 dB
Cấp ô nhiễmPollution degree2
Ambient air transport temperature-40…70 °C
Nhiệt độ bảo quảnAmbient air temperature for storage-40…70 °C

Đóng gói

Cấp đóng góiĐơn vịSố lượngD × R × CKhối lượng
Cấp 1PCE140.500 × 19.000 × 31.500 cm6.046 kg
Cấp 2S06680.000 × 60.000 × 75.000 cm49.588 kg

Tài liệu

Tài liệu mở tại website Schneider Electric.

Video

Mã liên quan

Thường mua kèm

MãMô tả (Schneider)
LC1D18B7Contactor, TeSys Deca, 3P(3NO), AC-3/3e, <=440V, 18A, 24V AC 50/60Hz coil, screw clamp terminals
LC1D18BDContactor, Tesys Deca, 3P(3NO), AC-3/3e, <=440V 18A, 24V DC coil, screw clamp terminals
LC1D18BLContactor, TeSys Deca, 3P(3NO), AC-3/3e, <=440V, 18A, 24V DC low consumption coil, screw clamp terminals
LC1D18E7Contactor, TeSys Deca, 3P(3NO), AC-3/3e, <=440V, 18A, 48V AC 50/60Hz coil, screw clamp terminals
LC1D18EDContactor, TeSys Deca, 3P(3NO), AC-3/3e, <=440V, 18A, 48V DC coil, screw clamp terminals, screw clamp terminals
LC1D18F7Contactor, TeSys Deca, 3P(3NO), AC-3/3e, <=440V, 18A, 110V AC 50/60Hz coil, screw clamp terminals
LC1D18FE7Contactor, TeSys Deca, 3P(3NO), AC-3/3e, <=440V, 18A, 115V AC 50/60Hz coil, screw clamp terminals
LC1D18M7Contactor, TeSys Deca, 3P(3NO), AC-3/3e, <=440V, 18A, 220V AC 50/60Hz coil, screw clamp terminals

Mã khác trong dòng Altivar Process ATV600

Xem toàn bộ dòng Altivar Process ATV600 (184 mã) →

Câu hỏi thường gặp

Hỏi đáp về ATV630U30M3

ATV630U30M3 còn sản xuất không?

Có. Theo dữ liệu Schneider Electric, ATV630U30M3 đang được sản xuất và bán thương mại. Fast Group kiểm tra hàng sẵn và thời gian giao khi báo giá.

Mã vạch (GTIN/EAN) của ATV630U30M3 là gì?

GTIN-13 của ATV630U30M3 là 3606480761645, dùng để đối chiếu nhãn hàng khi nhận hàng.

Mua biến tần Schneider ATV630U30M3 chính hãng ở đâu?

Fast Group cung cấp biến tần Schneider ATV630U30M3 chính hãng, CO/CQ đầy đủ theo lô, giao toàn quốc từ TP.HCM và Vũng Tàu. RFQ nhận trước 16:00 được phản hồi trong ngày làm việc.