

ATV660C40Q4X1 Biến tần Schneider Altivar Process ATV600
Biến tần Schneider Electric ATV660C40Q4X1 thuộc dòng Altivar Process ATV600: [Us] Điện áp nguồn định mức 380…415 V - 10…6 %; cấp bảo vệ IP IP23 theo IEC 61800-5-1; giao thức truyền thông EtherNet/IP, Modbus TCP, Modbus serial; kiểu làm mát đối lưu cưỡng bức.
- Dùng cho
- Asynchronous motors | Synchronous motors
- Provided equipment
- Enclosure PanelSeT SFN | Graphical operating panel in the enclosure door | Frequency inverter | Main switch | Line choke | Terminal block main supply | Terminal block motor
- Colour of enclosure
- Light grey (RAL 7035)
- Cấp bảo vệ IP
- IP23 conforming to IEC 61800-5-1
- Giao thức truyền thông
- EtherNet/IP | Modbus TCP | Modbus serial
- Kiểu làm mát
- Forced convection
- Tần số nguồn
- 50/60 Hz +/-5 %
- [Us] Điện áp nguồn định mức
- 380…415 V - 10…6 %
- Bảo hành hãng
- 18 tháng
- Hàng Schneider chính hãng
- CO/CQ đầy đủ
- Cấp hàng nhanh
Mô tả ATV660C40Q4X1
ATV660C40Q4X1 là biến tần thuộc dòng Altivar Process ATV600 của Schneider Electric. Ký hiệu thiết bị: ATV660. Thông số định mức chính: Dùng cho động cơ không đồng bộ, động cơ đồng bộ; Provided equipment Enclosure PanelSeT SFN, Graphical operating panel in the enclosure door, Frequency inverter, Main switch, Line choke, Terminal block main supply, …; Colour of enclosure Light grey (RAL 7035); Cấp bảo vệ IP IP23 theo IEC 61800-5-1.
Biến tần điều khiển tốc độ động cơ bằng cách thay đổi tần số và điện áp cấp, giúp tiết kiệm năng lượng và điều chỉnh tốc độ theo yêu cầu công nghệ.
Đặc tính kỹ thuật nổi bật
- Ứng dụng: Process and utilities
- Giao thức truyền thông: EtherNet/IP, Modbus TCP, Modbus serial
- Kiểu làm mát: đối lưu cưỡng bức
- Tần số nguồn: 50/60 Hz +/-5 %
- [Us] Điện áp nguồn định mức: 380…415 V - 10…6 %
- Số pha lưới: 3 pha
- Điện áp ra: <= power supply voltage
- Permissible temporary current boost: 1.1 x In during 60 s (tải thường), 1.5 x In during 60 s (tải nặng)
- Speed drive output frequency: 0.1…500 Hz
- Dòng ra liên tục: 730 A ở 2.5 kHz chế độ tải thường, 590 A ở 2.5 kHz chế độ tải nặng
- Energy efficiency ratio: 0.98
- Công suất tổn hao (W): 9900 W, total (tải thường), 7370 W, total (tải nặng), 1120 W, control part (tải thường), 770 W, control part (tải nặng)
Lắp đặt
Về lắp đặt, ATV660C40Q4X1 có kích thước rộng × cao × sâu 800 mm × 2150 mm × 664 mm; khối lượng tịnh 650 kg.
Môi trường làm việc
Điều kiện làm việc theo dữ liệu của hãng: cấp bảo vệ IP23 theo IEC 61800-5-1; nhiệt độ môi trường khi vận hành -10…0 °C without derating (with option enclosure heating), 0…40 °C without derating, 40…50 °C with derating factor; nhiệt độ bảo quản -25…70 °C; độ cao vận hành < 1000 m without derating, 1000…2000 m with current derating 1 % per 100 m, 2000…3800 m with current derating 1 % per 100 m for TT earthing system, 2000…3800 m with current derating 1 % per 100 m for TN earthing system, 2000…3800 m with current derating 1 % per 100 m for IT earthing system, 3800…4800 m with current derating 1 % per 100 m for TT earthing system, …; độ ẩm tương đối 5…95 % without condensation theo IEC 60068-2-3; cấp ô nhiễm 2 theo IEC 61800-5-1.
Tiêu chuẩn, chứng nhận và độ bền
ATV660C40Q4X1 đáp ứng tiêu chuẩn IEC 60204-1, IEC 61800-2, IEC 61800-3, IEC 61800-5-1; chứng nhận ATEX, EAC, C-Tick.
Tình trạng sản xuất
ATV660C40Q4X1 đang được Schneider Electric sản xuất và bán thương mại.
Đặt hàng
Thông tin đặt hàng: đóng gói cấp 1: 1 PCE; bảo hành hãng 18 tháng. Fast Group cung cấp hàng Schneider Electric chính hãng, CO/CQ đầy đủ theo lô; gửi mã ATV660C40Q4X1 và số lượng qua form RFQ để nhận báo giá.
Thông số kỹ thuật ATV660C40Q4X1
Tên thông số giữ thuật ngữ tiếng Anh của Schneider (chữ nhỏ) để tiện đối chiếu datasheet.
Thông số chính
| Dòng sản phẩmRange of product | Altivar Process ATV600 |
|---|---|
| Ứng dụngProduct specific application | Process and utilities |
| Loại sản phẩmProduct or component type | Variable speed drive |
| Ký hiệu thiết bịDevice short name | ATV660 |
| Dùng choProduct destination | Asynchronous motors | Synchronous motors |
| Provided equipment | Enclosure PanelSeT SFN | Graphical operating panel in the enclosure door | Frequency inverter | Main switch | Line choke | Terminal block main supply | Terminal block motor |
| Colour of enclosure | Light grey (RAL 7035) |
| Cấp bảo vệ IPIP degree of protection | IP23 conforming to IEC 61800-5-1 |
| Giao thức truyền thôngCommunication port protocol | EtherNet/IP | Modbus TCP | Modbus serial |
| Kiểu làm mátType of cooling | Forced convection |
| Tần số nguồnSupply frequency | 50/60 Hz +/-5 % |
| [Us] Điện áp nguồn định mức[Us] rated supply voltage | 380…415 V - 10…6 % |
| Số pha lướiNetwork number of phases | 3 phases |
| Điện áp raOutput voltage | <= power supply voltage |
| Permissible temporary current boost | 1.1 x In during 60 s (normal duty) | 1.5 x In during 60 s (heavy duty) |
| Speed drive output frequency | 0.1…500 Hz |
| Dòng ra liên tụcContinuous output current | 730 A at 2.5 kHz for normal duty | 590 A at 2.5 kHz for heavy duty |
| Energy efficiency ratio | 0.98 |
| Công suất tổn hao (W)Power dissipation in W | 9900 W, total (normal duty) | 7370 W, total (heavy duty) | 1120 W, control part (normal duty) | 770 W, control part (heavy duty) |
| Volume of cooling air | 1740 m3/h for power | 280 m3/h for control |
| Độ ồnNoise level | 71 dB conforming to 86/188/EEC - physical agents (noise) directive |
| Công suất động cơ (kW)Motor power kW | 400 kW for normal duty | 315 kW for heavy duty |
| Dòng ngắn mạch dự kiếnProspective line Isc | 50 kA for 100 ms |
| Motor recommanded cable cross section | 3 x (3 x 120 mm²) (heavy duty) | 3 x (3 x 185 mm²) (normal duty) | 4 x (3 x 120 mm²) (normal duty) | 4 x (3 x 95 mm²) (heavy duty) |
| Card tùy chọnOption card | Slot A: communication module, Profibus DP V1 | Slot A: communication module, PROFINET | Slot A: communication module, DeviceNet | Slot A: communication module, Modbus TCP/EtherNet/IP | Slot A: communication module, CANopen daisy chain RJ45 | Slot A: communication module, CANopen SUB-D 9 | Slot A: communication module, CANopen screw terminals | Slot A/slot B: digital and analog I/O extension module | Slot A/slot B: output relay extension module |
| Safety function | STO (safe torque off), level SIL 3 for <= 100 ms |
| Bộ lọc EMCEMC filter | Integrated conforming to IEC 61800-3, category C3, shielded cable with 150 m | Integrated conforming to IEC 61800-3, category C4, unshielded cable with 250 m |
Thông số bổ sung
| Số ngõ vào sốDiscrete input number | 8 |
|---|---|
| Kiểu bảo vệProtection type | Motor: thermal protection | Motor: safe torque off | Motor: motor phase break | Drive: thermal protection | Drive: safe torque off | Drive: overheating | Drive: overcurrent (between output phases and earth) | Drive: overload (output) | Drive: short-circuit protection | Drive: motor phase break | Drive: overvoltage (DC bus) | Drive: line supply overvoltage | Drive: line supply undervoltage | Drive: line supply phase loss | Drive: overspeed | Drive: break on the control circuit | Drive: short-circuit protection with semi-conductor fuse (main supply) | Drive: fan monitoring |
| Loại ngõ vào sốDiscrete input type | DI1…DI6 programmable, 24 V DC ( 2.2 kOhm |
| Frequency resolution | Display unit: 0.1 Hz | Analog input: 0.012/50 Hz |
| Connector type | RJ45 (on the control block) for Modbus serial | RJ45 (on the control block) for Ethernet IP/Modbus TCP |
| Discrete input logic | 16 preset speeds |
| Giao diện vật lýPhysical interface | 2-wire RS 485 for Modbus serial |
| Transmission frame | RTU for Modbus serial |
| Tốc độ truyềnTransmission rate | 10/100 Mbit/s for Ethernet IP/Modbus TCP | 4.8, 9.6, 19.2, 38.4 kbit/s for Modbus serial |
| Exchange mode | Half duplex, full duplex, autonegotiation Ethernet IP/Modbus TCP |
| Data format | 8 bits, configurable odd, even or no parity for Modbus serial |
| Type of polarization | No impedance for Modbus serial |
| Số ngõ vào analogAnalogue input number | 3 |
| Number of addresses | 1…247 for Modbus serial |
| Supply | External supply for digital inputs: 24 V DC (10…30 V), <1.25 mA, protection type: overload and short-circuit protection | Internal supply for reference potentiometer (1 to 10 kOhm): 10.5 V DC +/- 5 %, <10 mA, protection type: overload and short-circuit protection | Internal supply for digital inputs and STO: 24 V DC (21…27 V), <200 mA, protection type: overload and short-circuit protection |
| Loại ngõ vào analogAnalogue input type | AI1, AI2, AI3 software-configurable voltage: 0…10 V DC, impedance: 30 kOhm, resolution 12 bits | AI1, AI2, AI3 software-configurable current: 0…20 mA, impedance: 250 Ohm, resolution 12 bits |
| Báo hiệu tại chỗLocal signalling | LCD display unit front door operation function, status and configuration |
| Input compatibility | DI1…DI6: discrete input level 1 PLC conforming to IEC 61131-2 | DI5, DI6: discrete input level 1 PLC conforming to IEC 65A-68 | STOA, STOB: discrete input level 1 PLC conforming to IEC 61131-2 |
| Analogue output number | 2 |
| Discrete input logic | Positive logic (source) (DI1…DI6), 11 V (state 1) | Negative logic (sink) (DI1…DI6), > 16 V (state 0), 2.5 V (state 1) | Positive logic (source) (STOA, STOB), 11 V (state 1) |
| Sampling duration | 2 ms +/- 0.5 ms (DI1…DI4) - discrete input | 5 ms +/- 1 ms (DI5, DI6) - discrete input | 5 ms +/- 1 ms (AI1, AI2, AI3) - analog input | 10 ms +/- 1 ms (AQ1, AQ2) - analog output |
| Loại ngõ ra analogAnalogue output type | Software-configurable voltage AQ1, AQ2: 0…10 V DC impedance 470 Ohm, resolution 10 bits | Software-configurable current AQ1, AQ2: 0…20 mA, resolution 10 bits |
| Accuracy | +/- 0.6 % AI1, AI2, AI3 for a temperature variation 60 °C analog input | +/- 1 % AQ1, AQ2 for a temperature variation 60 °C analog output |
| Linearity error | AI1, AI2, AI3: +/- 0.15 % of maximum value for analog input | AQ1, AQ2: +/- 0.2 % for analog output |
| Relay output number | 3 |
| Refresh time | Relay output (R1, R2, R3): 5 ms (+/- 0.5 ms) |
| Isolation | Between power and control terminals |
| Relay output type | Configurable relay logic R1: fault relay NO/NC electrical durability 100000 cycles | Configurable relay logic R2: sequence relay NO electrical durability 100000 cycles | Configurable relay logic R3: sequence relay NO electrical durability 100000 cycles |
| Dòng đóng cắt tối đaMaximum switching current | Relay output R1, R2, R3 on resistive load, cos phi = 1: 3 A at 250 V AC | Relay output R1, R2, R3 on resistive load, cos phi = 1: 3 A at 30 V DC | Relay output R1, R2, R3 on inductive load, cos phi = 0.4 and L/R = 7 ms: 2 A at 250 V AC | Relay output R1, R2, R3 on inductive load, cos phi = 0.4 and L/R = 7 ms: 2 A at 30 V DC |
| Dòng đóng cắt tối thiểuMinimum switching current | Relay output R1, R2, R3: 5 mA at 24 V DC |
| Method of access | Slave Modbus TCP |
| Chế độ điều khiển động cơ không đồng bộAsynchronous motor control profile | Variable torque standard | Constant torque standard | Optimized torque mode |
| Chế độ điều khiển động cơ đồng bộSynchronous motor control profile | Permanent magnet motor |
| Dốc tăng / giảm tốcAcceleration and deceleration ramps | S, U or customized | Linear adjustable separately from 0.01 to 9000 s |
| Bù trượt động cơMotor slip compensation | Automatic whatever the load | Adjustable | Not available in permanent magnet motor law | Can be suppressed |
| Tần số đóng cắtSwitching frequency | 2…8 kHz adjustable with derating factor |
| Tần số đóng cắt danh địnhNominal switching frequency | 2.5 kHz |
| Braking to standstill | By DC injection |
| Dòng điện đầu vàoLine current | 681 A at 400 V (normal duty) | 545 A at 400 V (heavy duty) |
| Công suất biểu kiếnApparent power | 472 kVA at 400 V (normal duty) | 378 kVA at 400 V (heavy duty) |
| Maximum transient current | 803 A during 60 s per 10 min (normal duty) | 885 A during 60 s per 10 min (heavy duty) |
| Bảo vệ ngắn mạchShort-circuit protection | Internal: 315 A 3 aR fuse | Upstream: 800 A gG fuse (normal duty) | Upstream: 630 A gG fuse (heavy duty) |
| Đấu nối điệnElectrical connection | Removable screw terminals, clamping capacity: 0.5…1.5 mm² for control | M12 bar for main supply | M12 bar for motor |
| cable entry | Bottom |
| Chiều rộngWidth | 800 mm |
| Chiều caoHeight | 2150 mm |
| Chiều sâuDepth | 664 mm |
| Khối lượng tịnhNet weight | 650 kg |
Môi trường & tiêu chuẩn
| Điện trở cách điệnInsulation resistance | > 1 MOhm 500 V DC for 1 minute to earth |
|---|---|
| Cấp ô nhiễmPollution degree | 2 conforming to IEC 61800-5-1 |
| Khả năng chịu rungVibration resistance | 1.5 mm peak to peak (f= 3…10 Hz) conforming to IEC 60068-2-6 | 0.6 gn (f= 10…200 Hz) conforming to IEC 60068-2-6 | 3M3 conforming to IEC 60721-3-3 |
| Khả năng chịu sốcShock resistance | 4 gn for 11 ms conforming to IEC 60068-2-27 | 3M2 conforming to IEC 60721-3-3 |
| Độ ẩm tương đốiRelative humidity | 5…95 % without condensation conforming to IEC 60068-2-3 |
| Độ cao vận hànhOperating altitude | < 1000 m without derating | 1000…2000 m with current derating 1 % per 100 m | 2000…3800 m with current derating 1 % per 100 m for TT earthing system | 2000…3800 m with current derating 1 % per 100 m for TN earthing system | 2000…3800 m with current derating 1 % per 100 m for IT earthing system | 3800…4800 m with current derating 1 % per 100 m for TT earthing system | 3800…4800 m with current derating 1 % per 100 m for TN earthing system |
| Environmental characteristic | Chemical pollution resistance class 3C3 conforming to IEC 60721-3-3 | Dust pollution resistance class 3S3 conforming to IEC 60721-3-3 | Humidity resistant class 3K3 conforming to IEC 60721-3-3 |
| Vị trí lắp đặtOperating position | Vertical +/- 10 degree |
| Chứng nhậnProduct certifications | ATEX | EAC | C-Tick |
| Ký hiệuMarking | CE |
| Tiêu chuẩnStandards | IEC 60204-1 | IEC 61800-2 | IEC 61800-3 | IEC 61800-5-1 |
| Maximum THDI | <43 % full load conforming to IEC 61000-3-12 |
| Assembly style | In floor-standing enclosure compact version |
| Tương thích điện từ (EMC)Electromagnetic compatibility | Electrostatic discharge immunity test level 3 conforming to IEC 61000-4-2 | Radiated radio-frequency electromagnetic field immunity test level 3 conforming to IEC 61000-4-3 | Electrical fast transient/burst immunity test level 4 conforming to IEC 61000-4-4 | 1.2/50 µs - 8/20 µs surge immunity test level 3 conforming to IEC 61000-4-5 | Conducted radio-frequency immunity test level 3 conforming to IEC 61000-4-6 |
| Cấp quá ápOvervoltage category | III |
| Nhiệt độ môi trường khi vận hànhAmbient air temperature for operation | -10…0 °C without derating (with option enclosure heating) | 0…40 °C without derating | 40…50 °C with derating factor |
| Nhiệt độ bảo quảnAmbient air temperature for storage | -25…70 °C |
Đóng gói
| Cấp đóng gói | Đơn vị | Số lượng | D × R × C | Khối lượng |
|---|---|---|---|---|
| Cấp 1 | PCE | 1 | 90 × 1000 × 236 cm | 680 kg |
Tài liệu
- Datasheet ATV660C40Q4X1 (PDF)Datasheet
- Discover catalog for Altivar Process ATV600 variable speed drivesCatalog
- Discover catalog for EcoStruxure Automation ExpertCatalog
- Altivar Process Drive Systems Installation manualHướng dẫn sử dụng
- ATV600 Programming manualHướng dẫn sử dụng
- ATV600 & ATV900 ATEX manualHướng dẫn sử dụng
- MCADID0001027_3D-CADCAD 2D/3D
- MCADID0001027_3D-simplified.stpCAD 2D/3D
- MCADID0001027_2D-back.dwgCAD 2D/3D
- MCE_UL_CERTIFICATEChứng chỉ
- ATV6XX-BACNET-CERTIFICATEChứng chỉ
- ATV600 PROFIdrive Certificate with VW3A3647Chứng chỉ
- ATV660 & ATV960 UK DECLARATIONTuyên bố hợp chuẩn (DoC)
- Product Environmental Profile - ATV660 DRIVE SYSTEMS IP23 315 / 250 KW 400VHồ sơ môi trường (PEP)
Tài liệu mở tại website Schneider Electric.
Video
- Video - Panorama - Driving sustainability forward with Altivar Variable Speed DrivesVideo giới thiệu
- Altivar Process: How to set Heavy duty rating (drt)?Video hướng dẫn
- Altivar Process: How to import Graphic display terminal configuration files in SoMove?Video hướng dẫn
- Video hướng dẫnVideo hướng dẫn
Mã khác trong dòng Altivar Process ATV600
Hỏi đáp về ATV660C40Q4X1
ATV660C40Q4X1 còn sản xuất không?
Có. Theo dữ liệu Schneider Electric, ATV660C40Q4X1 đang được sản xuất và bán thương mại. Fast Group kiểm tra hàng sẵn và thời gian giao khi báo giá.
Mua biến tần Schneider ATV660C40Q4X1 chính hãng ở đâu?
Fast Group cung cấp biến tần Schneider ATV660C40Q4X1 chính hãng, CO/CQ đầy đủ theo lô, giao toàn quốc từ TP.HCM và Vũng Tàu. RFQ nhận trước 16:00 được phản hồi trong ngày làm việc.