
TM241C24U Bộ điều khiển lập trình (PLC) Schneider Logic Controller - Modicon M241
Bộ điều khiển lập trình (PLC) Schneider Electric TM241C24U thuộc dòng Logic Controller - Modicon M241: [Us] Điện áp nguồn định mức 24 V DC; loại ngõ ra số Transistor; số ngõ ra số 10 transistor 4 fast output; số ngõ vào số 14, discrete input 8 fast input theo IEC 61131-2 Type 1.
- [Us] Điện áp nguồn định mức
- 24 V DC
- Số ngõ vào số
- 14, discrete input 8 fast input conforming to IEC 61131-2 Type 1
- Loại ngõ ra số
- Transistor
- Số ngõ ra số
- 10 transistor 4 fast output
- Discrete output voltage
- 24 V DC for transistor output
- Discrete output current
- 0.5 A for transistor output (Q0…Q9) | 0.1 A for fast output (PTO mode) (Q0…Q3)
- GTIN / EAN-13
- 3606480611131
- Xuất xứ (tham khảo)
- Indonesia
- Bảo hành hãng
- 18 tháng
- Hàng Schneider chính hãng
- CO/CQ đầy đủ
- Cấp hàng nhanh
Mô tả TM241C24U
TM241C24U là bộ điều khiển lập trình (PLC) thuộc dòng Logic Controller - Modicon M241 của Schneider Electric. Thông số định mức chính: [Us] Điện áp nguồn định mức 24 V DC; Số ngõ vào số 14, discrete input 8 fast input theo IEC 61131-2 Type 1; Loại ngõ ra số Transistor; Số ngõ ra số 10 transistor 4 fast output.
Bộ điều khiển lập trình (PLC) thực hiện logic điều khiển máy và dây chuyền theo chương trình, kết nối với cảm biến, cơ cấu chấp hành và mạng truyền thông.
Đặc tính kỹ thuật nổi bật
- Discrete output voltage: 24 V DC for transistor output
- Discrete output current: 0.5 A for transistor output (Q0…Q9), 0.1 A for fast output (PTO mode) (Q0…Q3)
Lắp đặt
Về lắp đặt, TM241C24U có lắp trên Top hat type TH35-15 rail theo IEC 60715, Top hat type TH35-7.5 rail theo IEC 60715, plate or panel with fixing kit; kích thước rộng × cao × sâu 150 mm × 90 mm × 95 mm; khối lượng tịnh 0.53 kg.
Môi trường làm việc
Điều kiện làm việc theo dữ liệu của hãng: cấp bảo vệ IP20 with protective cover in place; nhiệt độ môi trường khi vận hành -10…50 °C (vertical installation), -10…55 °C (horizontal installation); nhiệt độ bảo quản -25…70 °C; độ cao vận hành 0…2000 m; độ ẩm tương đối 10…95 %, without condensation (in operation), 10…95 %, without condensation (in storage); cấp ô nhiễm 2.
Tiêu chuẩn, chứng nhận và độ bền
TM241C24U đáp ứng tiêu chuẩn ANSI/ISA 12-12-01, CSA C22.2 No 142, CSA C22.2 No 213, IEC 61131-2:2007, Marine specification (LR, ABS, DNV, GL), UL 508; chứng nhận RCM, cULus, CE, UKCA, DNV-GL, ABS, ….
Tình trạng sản xuất
TM241C24U đang được Schneider Electric sản xuất và bán thương mại.
Đặt hàng
Thông tin đặt hàng: mã vạch GTIN-13 3606480611131; đóng gói cấp 1: 1 PCE; bảo hành hãng 18 tháng; xuất xứ tham khảo Indonesia (theo dữ liệu thị trường quốc tế, có thể khác theo lô hàng về Việt Nam). Fast Group cung cấp hàng Schneider Electric chính hãng, CO/CQ đầy đủ theo lô; gửi mã TM241C24U và số lượng qua form RFQ để nhận báo giá.
Thông số kỹ thuật TM241C24U
Tên thông số giữ thuật ngữ tiếng Anh của Schneider (chữ nhỏ) để tiện đối chiếu datasheet.
Thông số chính
| Dòng sản phẩmRange of product | Modicon M241 |
|---|---|
| Loại sản phẩmProduct or component type | Logic controller |
| [Us] Điện áp nguồn định mức[Us] rated supply voltage | 24 V DC |
| Số ngõ vào sốDiscrete input number | 14, discrete input 8 fast input conforming to IEC 61131-2 Type 1 |
| Loại ngõ ra sốDiscrete output type | Transistor |
| Số ngõ ra sốDiscrete output number | 10 transistor 4 fast output |
| Discrete output voltage | 24 V DC for transistor output |
| Discrete output current | 0.5 A for transistor output (Q0…Q9) | 0.1 A for fast output (PTO mode) (Q0…Q3) |
Thông số bổ sung
| Discrete I/O number | 24 |
|---|---|
| Maximum number of I/O expansion module | 7 (local I/O-Architecture) | 14 (remote I/O-Architecture) |
| Giới hạn điện áp nguồnSupply voltage limits | 20.4…28.8 V |
| Inrush current | 50 A |
| Power consumption in W | 32.6…40.4 W (with max number of I/O expansion module) |
| Discrete input logic | Sink or source |
| Discrete input voltage | 24 V |
| Discrete input voltage type | DC |
| Voltage state 1 guaranteed | >= 15 V for input |
| Voltage state 0 guaranteed | <= 5 V for input |
| Discrete input current | 5 mA for input | 10.7 mA for fast input |
| Input impedance | 4.7 kOhm for input | 2.81 kOhm for fast input |
| Response time | 50 µs turn-on, I0…I13 terminal(s) for input | 50 µs turn-off, I0…I13 terminal(s) for input | <= 2 µs turn-on, I0…I7 terminal(s) for fast input | <= 2 µs turn-off, I0…I7 terminal(s) for fast input | <= 34 µs turn-on, Q0…Q9 terminal(s) for output | <= 250 µs turn-off, Q0…Q9 terminal(s) for output | <= 2 µs turn-on, Q0…Q3 terminal(s) for fast output | <= 2 µs turn-off, Q0…Q3 terminal(s) for fast output |
| Configurable filtering time | 1 s for fast input | 12 ms for fast input | 0 ms for input | 1 ms for input | 4 ms for input | 12 ms for input |
| Discrete output logic | Negative logic (sink) |
| Output voltage limits | 30 V DC |
| Maximum current per output common | 2 A with Q0…Q3 for fast output | 2 A with Q4…Q7 for output | 1 A with Q8…Q9 for output |
| Maximum output frequency | 20 kHz for fast output (PWM mode) | 100 kHz for fast output (PLS mode) | 1 kHz for output |
| Accuracy | +/- 0.1 % at 0.02…0.1 kHz for fast output | +/- 1 % at 0.1…1 kHz for fast output |
| Maximum leakage current | 5 µA for output |
| Maximum voltage drop | <1 V |
| Maximum tungsten load | <2.4 W |
| Kiểu bảo vệProtection type | Short-circuit protection | Short-circuit and overload protection with automatic reset | Reverse polarity protection for fast output |
| Thời gian resetReset time | 10 ms automatic reset output | 12 s automatic reset fast output |
| Memory capacity | 64 MB for system memory RAM |
| Data backed up | 128 MB built-in flash memory for backup of user programs |
| Data storage equipment | <= 16 GB SD card (optional) |
| Battery type | BR2032 lithium non-rechargeable, battery life: 4 year(s) |
| Backup time | 2 years at 25 °C |
| Execution time for 1 KInstruction | 0.3 ms for event and periodic task | 0.7 ms for other instruction |
| Application structure | 4 cyclic master tasks | 8 external event tasks | 8 event tasks | 3 cyclic master tasks + 1 freewheeling task |
| Realtime clock | With |
| Clock drift | <= 60 s/month at 25 °C |
| Positioning functions | PTO function 4 channel(s) (positioning frequency: 100 kHz) | PTO function 4 channel(s) for transistor output (positioning frequency: 1 kHz) |
| Counting input number | 4 fast input (HSC mode) at 200 kHz | 14 standard input at 1 kHz |
| Control signal type | A/B at 100 kHz for fast input (HSC mode) | Pulse/direction at 200 kHz for fast input (HSC mode) | Single phase at 200 kHz for fast input (HSC mode) |
| Integrated connection type | Non isolated serial link serial 1 with RJ45 connector and RS232/RS485 interface | Non isolated serial link serial 2 with removable screw terminal block connector and RS485 interface | USB port with mini B USB 2.0 connector |
| Supply | (serial 1)serial link supply: 5 V, <200 mA |
| Tốc độ truyềnTransmission rate | 1.2…115.2 kbit/s (115.2 kbit/s by default) for bus length of 15 m for RS485 | 1.2…115.2 kbit/s (115.2 kbit/s by default) for bus length of 3 m for RS232 | 480 Mbit/s for bus length of 3 m for USB |
| Giao thức truyền thôngCommunication port protocol | Non isolated serial link: Modbus master/slave |
| Báo hiệu tại chỗLocal signalling | 1 LED (green) for PWR | 1 LED (green) for RUN | 1 LED (red) for module error (ERR) | 1 LED (red) for I/O error (I/O) | 1 LED (green) for SD card access (SD) | 1 LED (red) for BAT | 1 LED (green) for SL1 | 1 LED (green) for SL2 | 1 LED (red) for bus fault on TM4 (TM4) | 1 LED per channel (green) for I/O state |
| Đấu nối điệnElectrical connection | removable screw terminal blockfor inputs and outputs (pitch 5.08 mm) | removable screw terminal blockfor connecting the 24 V DC power supply (pitch 5.08 mm) |
| Maximum cable distance between devices | Unshielded cable: <50 m for input | Shielded cable: <10 m for fast input | Unshielded cable: <50 m for output | Shielded cable: <3 m for fast output |
| Insulation | Between supply and internal logic at 500 V AC | Non-insulated between supply and ground | Between input and internal logic at 500 V AC | Non-insulated between inputs | Between fast input and internal logic at 500 V AC | Between output and internal logic at 500 V AC | Non-insulated between outputs | Between fast output and internal logic at 500 V AC |
| Ký hiệuMarking | CE |
| Surge withstand | 1 kV power lines (DC) common mode conforming to IEC 61000-4-5 | 1 kV shielded cable common mode conforming to IEC 61000-4-5 | 0.5 kV power lines (DC) differential mode conforming to IEC 61000-4-5 | 1 kV relay output differential mode conforming to IEC 61000-4-5 | 1 kV input common mode conforming to IEC 61000-4-5 | 1 kV transistor output common mode conforming to IEC 61000-4-5 |
| Kiểu lắp đặtMounting support | Top hat type TH35-15 rail conforming to IEC 60715 | Top hat type TH35-7.5 rail conforming to IEC 60715 | plate or panel with fixing kit |
| Chiều caoHeight | 90 mm |
| Chiều sâuDepth | 95 mm |
| Chiều rộngWidth | 150 mm |
| Khối lượng tịnhNet weight | 0.53 kg |
Môi trường & tiêu chuẩn
| Tiêu chuẩnStandards | ANSI/ISA 12-12-01 | CSA C22.2 No 142 | CSA C22.2 No 213 | IEC 61131-2:2007 | Marine specification (LR, ABS, DNV, GL) | UL 508 |
|---|---|
| Chứng nhậnProduct certifications | RCM | cULus | CE | UKCA | DNV-GL | ABS | LR |
| Resistance to electrostatic discharge | 8 kV in air conforming to IEC 61000-4-2 | 4 kV on contact conforming to IEC 61000-4-2 |
| Resistance to electromagnetic fields | 10 V/m 80 MHz…1 GHz conforming to IEC 61000-4-3 | 3 V/m 1.4 GHz…2 GHz conforming to IEC 61000-4-3 | 1 V/m 2 GHz…3 GHz conforming to IEC 61000-4-3 |
| Resistance to fast transients | 2 kV (power lines) conforming to IEC 61000-4-4 | 1 kV (serial link) conforming to IEC 61000-4-4 | 1 kV (input) conforming to IEC 61000-4-4 | 1 kV (transistor output) conforming to IEC 61000-4-4 |
| Resistance to conducted disturbances | 10 V 0.15…80 MHz conforming to IEC 61000-4-6 | 3 V 0.1…80 MHz conforming to Marine specification (LR, ABS, DNV, GL) | 10 V spot frequency (2, 3, 4, 6.2, 8.2, 12.6, 16.5, 18.8, 22, 25 MHz) conforming to Marine specification (LR, ABS, DNV, GL) |
| Electromagnetic emission | Conducted emissions - test level: 120…69 dBµV/m QP ( power lines) at 10…150 kHz conforming to IEC 55011 | Conducted emissions - test level: 63 dBμV/m QP ( power lines) at 1.5…30 MHz conforming to IEC 55011 | Radiated emissions - test level: 40 dBμV/m QP class A at 30…230 MHz conforming to IEC 55011 | Conducted emissions - test level: 79…63 dBμV/m QP ( power lines) at 150…1500 kHz conforming to IEC 55011 | Radiated emissions - test level: 47 dBμV/m QP class A at 230…1000 MHz conforming to IEC 55011 |
| Immunity to microbreaks | 10 ms |
| Nhiệt độ môi trường khi vận hànhAmbient air temperature for operation | -10…50 °C (vertical installation) | -10…55 °C (horizontal installation) |
| Nhiệt độ bảo quảnAmbient air temperature for storage | -25…70 °C |
| Độ ẩm tương đốiRelative humidity | 10…95 %, without condensation (in operation) | 10…95 %, without condensation (in storage) |
| Cấp bảo vệ IPIP degree of protection | IP20 with protective cover in place |
| Cấp ô nhiễmPollution degree | 2 |
| Độ cao vận hànhOperating altitude | 0…2000 m |
| Storage altitude | 0…3000 m |
| Khả năng chịu rungVibration resistance | 3.5 mm at 5…8.4 Hz on symmetrical rail | 3 gn at 8.4…150 Hz on symmetrical rail | 3.5 mm at 5…8.4 Hz on panel mounting | 3 gn at 8.4…150 Hz on panel mounting |
| Khả năng chịu sốcShock resistance | 15 gn for 11 ms |
Đóng gói
| Cấp đóng gói | Đơn vị | Số lượng | D × R × C | Khối lượng |
|---|---|---|---|---|
| Cấp 1 | PCE | 1 | 18.6 × 11.45 × 12.8 cm | 799.0 g |
| Cấp 2 | S03 | 12 | 40 × 30 × 30 cm | 9.588 kg |
Tài liệu
- Datasheet TM241C24U (PDF)Datasheet
- Catalog Modicon M241 Programmable Logic Controller for performance demanding applications_October 2023Catalog
- Modicon M241 Logic Controller, Programming GuideHướng dẫn sử dụng
- Modicon M241 Logic Controller, Hardware GuideHướng dẫn sử dụng
- Modicon M241 Logic Controller, User GuideHướng dẫn sử dụng
- Modicon M241 Logic Controller, System Functions and Variables, PLCSystem Library GuideHướng dẫn sử dụng
- Modicon M241 Logic Controller - PTOPWM, Library GuideHướng dẫn sử dụng
- MCADID0000733_3D-CADCAD 2D/3D
- Compact Hardwired Logic Controller M241 - Wiring DiagramCAD 2D/3D
- MCADID0000733_3D-simplified.stpCAD 2D/3D
- Modicon, TM241, TM251, TMC4, TM3, TM4, DNV, MarineChứng chỉ
- Modicon,TM241, TMC4, Certificate, cULus, Hazardous LocationChứng chỉ
- Modicon, TM241, TM251, IACS, ABS, MarineChứng chỉ
- Modicon DoC TM241Tuyên bố hợp chuẩn (DoC)
- Logic Controller - Modicon M241Hồ sơ môi trường (PEP)
Tài liệu mở tại website Schneider Electric.
Mã liên quan
Thường mua kèm
Mã khác trong dòng Logic Controller - Modicon M241
Hỏi đáp về TM241C24U
TM241C24U còn sản xuất không?
Có. Theo dữ liệu Schneider Electric, TM241C24U đang được sản xuất và bán thương mại. Fast Group kiểm tra hàng sẵn và thời gian giao khi báo giá.
Mã vạch (GTIN/EAN) của TM241C24U là gì?
GTIN-13 của TM241C24U là 3606480611131, dùng để đối chiếu nhãn hàng khi nhận hàng.
Mua bộ điều khiển lập trình (plc) Schneider TM241C24U chính hãng ở đâu?
Fast Group cung cấp bộ điều khiển lập trình (plc) Schneider TM241C24U chính hãng, CO/CQ đầy đủ theo lô, giao toàn quốc từ TP.HCM và Vũng Tàu. RFQ nhận trước 16:00 được phản hồi trong ngày làm việc.