Hàng Schneider chính hãngCO/CQ đầy đủCấp hàng nhanhZalo / Hotline (+84) 938 888 958
TM241C24R Bộ điều khiển lập trình (PLC) Schneider Modicon M241
Hình ảnh tham khảo © Schneider Electric
Schneider Electric · Logic Controller - Modicon M241

TM241C24R Bộ điều khiển lập trình (PLC) Schneider Logic Controller - Modicon M241

Đang sản xuất

Bộ điều khiển lập trình (PLC) Schneider Electric TM241C24R thuộc dòng Logic Controller - Modicon M241: [Us] Điện áp nguồn định mức 100…240 V AC; loại ngõ ra số Transistor, Relay; số ngõ ra số 6 relay, 4 transistor 4 fast output; số ngõ vào số 14, discrete input 8 fast input theo IEC 61131-2 Type 1.

[Us] Điện áp nguồn định mức
100…240 V AC
Số ngõ vào số
14, discrete input 8 fast input conforming to IEC 61131-2 Type 1
Loại ngõ ra số
Transistor | Relay
Số ngõ ra số
6 relay | 4 transistor 4 fast output
Discrete output voltage
5…125 V DC for relay output | 5…250 V AC for relay output | 24 V DC for transistor output
Discrete output current
2 A for relay output (Q4…Q9) | 0.1 A for fast output (PTO mode) (TR0…TR3) | 0.5 A for transistor output (TR0…TR3)
GTIN / EAN-13
3606480648816
Xuất xứ (tham khảo)
Indonesia
Bảo hành hãng
18 tháng
  • Hàng Schneider chính hãng
  • CO/CQ đầy đủ
  • Cấp hàng nhanh

Mô tả TM241C24R

TM241C24R là bộ điều khiển lập trình (PLC) thuộc dòng Logic Controller - Modicon M241 của Schneider Electric. Thông số định mức chính: [Us] Điện áp nguồn định mức 100…240 V AC; Số ngõ vào số 14, discrete input 8 fast input theo IEC 61131-2 Type 1; Loại ngõ ra số Transistor, Relay; Số ngõ ra số 6 relay, 4 transistor 4 fast output.

Bộ điều khiển lập trình (PLC) thực hiện logic điều khiển máy và dây chuyền theo chương trình, kết nối với cảm biến, cơ cấu chấp hành và mạng truyền thông.

Đặc tính kỹ thuật nổi bật

  • Discrete output voltage: 5…125 V DC for relay output, 5…250 V AC for relay output, 24 V DC for transistor output
  • Discrete output current: 2 A for relay output (Q4…Q9), 0.1 A for fast output (PTO mode) (TR0…TR3), 0.5 A for transistor output (TR0…TR3)

Lắp đặt

Về lắp đặt, TM241C24R có lắp trên Top hat type TH35-15 rail theo IEC 60715, Top hat type TH35-7.5 rail theo IEC 60715, plate or panel with fixing kit; kích thước rộng × cao × sâu 150 mm × 90 mm × 95 mm; khối lượng tịnh 0.53 kg.

Môi trường làm việc

Điều kiện làm việc theo dữ liệu của hãng: cấp bảo vệ IP20 with protective cover in place; nhiệt độ môi trường khi vận hành -10…50 °C (vertical installation), -10…55 °C (horizontal installation); nhiệt độ bảo quản -25…70 °C; độ cao vận hành 0…2000 m; độ ẩm tương đối 10…95 %, without condensation (in operation), 10…95 %, without condensation (in storage); cấp ô nhiễm 2.

Tiêu chuẩn, chứng nhận và độ bền

TM241C24R đáp ứng tiêu chuẩn ANSI/ISA 12-12-01, CSA C22.2 No 142, CSA C22.2 No 213, IEC 61131-2:2007, Marine specification (LR, ABS, DNV, GL), UL 508; chứng nhận RCM, cULus, CE, UKCA, DNV-GL, ABS, ….

Tình trạng sản xuất

TM241C24R đang được Schneider Electric sản xuất và bán thương mại.

Đặt hàng

Thông tin đặt hàng: mã vạch GTIN-13 3606480648816; đóng gói cấp 1: 1 PCE; bảo hành hãng 18 tháng; xuất xứ tham khảo Indonesia (theo dữ liệu thị trường quốc tế, có thể khác theo lô hàng về Việt Nam). Fast Group cung cấp hàng Schneider Electric chính hãng, CO/CQ đầy đủ theo lô; gửi mã TM241C24R và số lượng qua form RFQ để nhận báo giá.

Thông số kỹ thuật TM241C24R

Tên thông số giữ thuật ngữ tiếng Anh của Schneider (chữ nhỏ) để tiện đối chiếu datasheet.

Thông số chính

Dòng sản phẩmRange of productModicon M241
Loại sản phẩmProduct or component typeLogic controller
[Us] Điện áp nguồn định mức[Us] rated supply voltage100…240 V AC
Số ngõ vào sốDiscrete input number14, discrete input 8 fast input conforming to IEC 61131-2 Type 1
Loại ngõ ra sốDiscrete output typeTransistor | Relay
Số ngõ ra sốDiscrete output number6 relay | 4 transistor 4 fast output
Discrete output voltage5…125 V DC for relay output | 5…250 V AC for relay output | 24 V DC for transistor output
Discrete output current2 A for relay output (Q4…Q9) | 0.1 A for fast output (PTO mode) (TR0…TR3) | 0.5 A for transistor output (TR0…TR3)
Thông số bổ sung
Discrete I/O number24
Maximum number of I/O expansion module7 (local I/O-Architecture) | 14 (remote I/O-Architecture)
Giới hạn điện áp nguồnSupply voltage limits85…264 V
Tần số lướiNetwork frequency50/60 Hz
Discrete input logicSink or source
Discrete input voltage24 V
Discrete input voltage typeDC
Voltage state 1 guaranteed>= 15 V for input
Voltage state 0 guaranteed<= 5 V for input
Discrete input current5 mA for input
Input impedance4.7 kOhm for input
Response time50 µs turn-on, I0…I13 terminal(s) for input
Configurable filtering time1 s for fast input
Discrete output logicPositive logic (source)
Output voltage limits125 V DC relay output | 30 V DC transistor output | 277 V AC relay output
Maximum output frequency1 kHz for transistor output | 20 kHz for fast output (PWM mode) | 100 kHz for fast output (PLS mode)
Accuracy+/- 0.1 % at 0.02…0.1 kHz for fast output | +/- 1 % at 0.1…1 kHz for fast output
Kiểu bảo vệProtection typeShort-circuit protection for transistor output | Short-circuit and overload protection with automatic reset for transistor output | Reverse polarity protection for transistor output | Without protection for relay output
Thời gian resetReset time10 ms automatic reset output | 12 s automatic reset fast output
Memory capacity64 MB for system memory RAM
Data backed up128 MB built-in flash memory for backup of user programs
Data storage equipment<= 16 GB SD card (optional)
Battery typeBR2032 lithium non-rechargeable, battery life: 4 year(s)
Backup time2 years at 25 °C
Execution time for 1 KInstruction0.3 ms for event and periodic task | 0.7 ms for other instruction
Application structure4 cyclic master tasks | 3 cyclic master tasks + 1 freewheeling task | 8 external event tasks | 8 event tasks
Realtime clockWith
Clock drift<= 60 s/month at 25 °C
Positioning functionsPTO function 4 channel(s) (positioning frequency: 100 kHz)
Counting input number4 fast input (HSC mode) at 200 kHz | 14 standard input at 1 kHz
Control signal typeA/B at 100 kHz for fast input (HSC mode) | Pulse/direction at 200 kHz for fast input (HSC mode) | Single phase at 200 kHz for fast input (HSC mode)
Integrated connection typeNon isolated serial link serial 1 with RJ45 connector and RS232/RS485 interface | Non isolated serial link serial 2 with removable screw terminal block connector and RS485 interface | USB port with mini B USB 2.0 connector
Supply(serial 1)serial link supply: 5 V, <200 mA
Tốc độ truyềnTransmission rate1.2…115.2 kbit/s (115.2 kbit/s by default) for bus length of 15 m for RS485 | 1.2…115.2 kbit/s (115.2 kbit/s by default) for bus length of 3 m for RS232 | 480 Mbit/s for bus length of 3 m for USB
Giao thức truyền thôngCommunication port protocolNon isolated serial link: Modbus master/slave
Báo hiệu tại chỗLocal signalling1 LED (green) for PWR | 1 LED (green) for RUN | 1 LED (red) for module error (ERR) | 1 LED (red) for I/O error (I/O) | 1 LED (green) for SD card access (SD) | 1 LED (red) for BAT | 1 LED (green) for SL1 | 1 LED (green) for SL2 | 1 LED (red) for bus fault on TM4 (TM4) | 1 LED per channel (green) for I/O state
Đấu nối điệnElectrical connectionremovable screw terminal blockfor inputs and outputs (pitch 5.08 mm) | removable screw terminal blockfor connecting the 24 V DC power supply (pitch 5.08 mm)
Maximum cable distance between devicesUnshielded cable: <50 m for input | Shielded cable: <10 m for fast input | Unshielded cable: <50 m for output | Shielded cable: <3 m for fast output
InsulationBetween supply and internal logic at 500 V AC | Non-insulated between supply and ground
Ký hiệuMarkingCE
Sensor power supply24 V DC at 400 mA supplied by the controller
Surge withstand2 kV power lines (AC) common mode conforming to IEC 61000-4-5 | 2 kV relay output common mode conforming to IEC 61000-4-5 | 1 kV shielded cable common mode conforming to IEC 61000-4-5 | 1 kV power lines (AC) differential mode conforming to IEC 61000-4-5 | 1 kV relay output differential mode conforming to IEC 61000-4-5 | 1 kV input common mode conforming to IEC 61000-4-5 | 1 kV transistor output common mode conforming to IEC 61000-4-5
Kiểu lắp đặtMounting supportTop hat type TH35-15 rail conforming to IEC 60715 | Top hat type TH35-7.5 rail conforming to IEC 60715 | plate or panel with fixing kit
Chiều caoHeight90 mm
Chiều sâuDepth95 mm
Chiều rộngWidth150 mm
Khối lượng tịnhNet weight0.53 kg
Môi trường & tiêu chuẩn
Tiêu chuẩnStandardsANSI/ISA 12-12-01 | CSA C22.2 No 142 | CSA C22.2 No 213 | IEC 61131-2:2007 | Marine specification (LR, ABS, DNV, GL) | UL 508
Chứng nhậnProduct certificationsRCM | cULus | CE | UKCA | DNV-GL | ABS | LR
Resistance to electrostatic discharge8 kV in air conforming to IEC 61000-4-2 | 4 kV on contact conforming to IEC 61000-4-2
Resistance to electromagnetic fields10 V/m 80 MHz…1 GHz conforming to IEC 61000-4-3 | 3 V/m 1.4 GHz…2 GHz conforming to IEC 61000-4-3 | 1 V/m 2 GHz…3 GHz conforming to IEC 61000-4-3
Resistance to fast transients2 kV (power lines) conforming to IEC 61000-4-4 | 2 kV (relay output) conforming to IEC 61000-4-4 | 1 kV (serial link) conforming to IEC 61000-4-4 | 1 kV (input) conforming to IEC 61000-4-4 | 1 kV (transistor output) conforming to IEC 61000-4-4
Resistance to conducted disturbances10 V 0.15…80 MHz conforming to IEC 61000-4-6 | 3 V 0.1…80 MHz conforming to Marine specification (LR, ABS, DNV, GL) | 10 V spot frequency (2, 3, 4, 6.2, 8.2, 12.6, 16.5, 18.8, 22, 25 MHz) conforming to Marine specification (LR, ABS, DNV, GL)
Electromagnetic emissionConducted emissions - test level: 120…69 dBµV/m QP ( power lines) at 10…150 kHz conforming to IEC 55011 | Conducted emissions - test level: 63 dBμV/m QP ( power lines) at 1.5…30 MHz conforming to IEC 55011 | Conducted emissions - test level: 79 dBμV/m QP/66 dBμV/m AV ( power lines) at 0.15…0.5 MHz conforming to IEC 55011 | Conducted emissions - test level: 73 dBμV/m QP/60 dBμV/m AV ( power lines) at 0.5…300 MHz conforming to IEC 55011 | Radiated emissions - test level: 40 dBμV/m QP class A ( 10 m) at 30…230 MHz conforming to IEC 55011 | Conducted emissions - test level: 79…63 dBμV/m QP ( power lines) at 150…1500 kHz conforming to IEC 55011 | Radiated emissions - test level: 47 dBμV/m QP class A ( 10 m) at 230…1000 MHz conforming to IEC 55011
Immunity to microbreaks10 ms
Nhiệt độ môi trường khi vận hànhAmbient air temperature for operation-10…50 °C (vertical installation) | -10…55 °C (horizontal installation)
Nhiệt độ bảo quảnAmbient air temperature for storage-25…70 °C
Độ ẩm tương đốiRelative humidity10…95 %, without condensation (in operation) | 10…95 %, without condensation (in storage)
Cấp bảo vệ IPIP degree of protectionIP20 with protective cover in place
Cấp ô nhiễmPollution degree2
Độ cao vận hànhOperating altitude0…2000 m
Storage altitude0…3000 m
Khả năng chịu rungVibration resistance3.5 mm at 5…8.4 Hz on symmetrical rail | 3 gn at 8.4…150 Hz on symmetrical rail | 3.5 mm at 5…8.4 Hz on panel mounting | 3 gn at 8.4…150 Hz on panel mounting
Khả năng chịu sốcShock resistance15 gn for 11 ms

Đóng gói

Cấp đóng góiĐơn vịSố lượngD × R × CKhối lượng
Cấp 1PCE118.673 × 13.231 × 11.253 cm750.0 g
Cấp 2S03840 × 30 × 30 cm6.91 kg
Cấp 3P066480.0 × 60.0 × 75.0 cm60.64 kg

Tài liệu

Tài liệu mở tại website Schneider Electric.

Mã liên quan

Thường mua kèm

MãMô tả (Schneider)
TM3XTRA1 Hỏi giáremote transmitter module; Modicon TM3
TM3XREC1 Hỏi giáremote receiver module; Modicon TM3

Mã khác trong dòng Logic Controller - Modicon M241

Xem toàn bộ dòng Logic Controller - Modicon M241 (23 mã) →

Câu hỏi thường gặp

Hỏi đáp về TM241C24R

TM241C24R còn sản xuất không?

Có. Theo dữ liệu Schneider Electric, TM241C24R đang được sản xuất và bán thương mại. Fast Group kiểm tra hàng sẵn và thời gian giao khi báo giá.

Mã vạch (GTIN/EAN) của TM241C24R là gì?

GTIN-13 của TM241C24R là 3606480648816, dùng để đối chiếu nhãn hàng khi nhận hàng.

Mua bộ điều khiển lập trình (plc) Schneider TM241C24R chính hãng ở đâu?

Fast Group cung cấp bộ điều khiển lập trình (plc) Schneider TM241C24R chính hãng, CO/CQ đầy đủ theo lô, giao toàn quốc từ TP.HCM và Vũng Tàu. RFQ nhận trước 16:00 được phản hồi trong ngày làm việc.