Hàng Schneider chính hãngCO/CQ đầy đủCấp hàng nhanhZalo / Hotline (+84) 938 888 958
RM35TF30SP01 Modular measurement and control relays Schneider Harmony Relay
Hình ảnh tham khảo © Schneider Electric
Schneider Electric · Zelio Control

RM35TF30SP01 Modular measurement and control relays Schneider Zelio Control

Ngừng sản xuất 01/11/2020
Ngừng sản xuất – 01/11/2020Mã thay thế: RM35TF30

Modular measurement and control relays Schneider Electric RM35TF30SP01 thuộc dòng Zelio Control: loại rơ le Multifunction control relay; thông số rơ le giám sát Phase sequence, Asymmetry, Undervoltage and overvoltage in window mode, Phase failure detection; tên rơ le RM35TF. Mã đã ngừng sản xuất từ 01/11/2020. Mã thay thế: RM35TF30.

Loại rơ le
Multifunction control relay
Thông số rơ le giám sát
Phase sequence | Asymmetry | Undervoltage and overvoltage in window mode | Phase failure detection
Tên rơ le
RM35TF
GTIN / EAN-13
3389119215442
Bảo hành hãng
18 tháng
  • Hàng Schneider chính hãng
  • CO/CQ đầy đủ
  • Cấp hàng nhanh

Mô tả RM35TF30SP01

RM35TF30SP01 là modular measurement and control relays thuộc dòng Zelio Control của Schneider Electric. Thông số định mức chính: Loại rơ le Multifunction control relay; Thông số rơ le giám sát Phase sequence, Asymmetry, Undervoltage and overvoltage in window mode, Phase failure detection; Tên rơ le RM35TF.

Đặc tính kỹ thuật nổi bật

  • Ứng dụng: For 3-phase supply

Lắp đặt

Về lắp đặt, RM35TF30SP01 có lắp trên 35 mm symmetrical DIN rail theo IEC 60715; khối lượng tịnh 0.13 kg; đấu nối kiểu Screw terminals, 1 x 0.5…1 x 4 mm² (20 AWG…11 AWG) solid without cable end, Screw terminals, 2 x 0.5…2 x 2.5 mm² (20 AWG…14 AWG) solid without cable end, Screw terminals, 1 x 0.2…1 x 2.5 mm² (24 AWG…12 AWG) dây mềm có đầu cốt, Screw terminals, 2 x 0.2…2 x 1.5 mm² (24 AWG…16 AWG) dây mềm có đầu cốt; mô-men siết 0.6…1 N.m theo IEC 60947-1.

Môi trường làm việc

Điều kiện làm việc theo dữ liệu của hãng: cấp bảo vệ IP20 (terminals) theo IEC 60529, IP30 (casing) theo IEC 60529; nhiệt độ môi trường khi vận hành -20…50 °C; nhiệt độ bảo quản -40…70 °C; độ ẩm tương đối 95 % ở 55 °C theo IEC 60068-2-30; cấp ô nhiễm 3 theo IEC 60664-1.

Tiêu chuẩn, chứng nhận và độ bền

RM35TF30SP01 đáp ứng tiêu chuẩn IEC 60255-1; chứng nhận CSA, C-Tick, GL, GOST, UL; độ bền cơ khí 30000000 cycles; độ bền điện 100000 cycles.

Tình trạng sản xuất

RM35TF30SP01 đã ngừng sản xuất từ 01/11/2020. Mã thay thế do hãng công bố: RM35TF30.

Đặt hàng

Thông tin đặt hàng: mã vạch GTIN-13 3389119215442; đóng gói cấp 1: 1 PCE; bảo hành hãng 18 tháng. Fast Group cung cấp hàng Schneider Electric chính hãng, CO/CQ đầy đủ theo lô; gửi mã RM35TF30SP01 và số lượng qua form RFQ để nhận báo giá.

Thông số kỹ thuật RM35TF30SP01

Tên thông số giữ thuật ngữ tiếng Anh của Schneider (chữ nhỏ) để tiện đối chiếu datasheet.

Thông số chính

Dòng sản phẩmRange of productHarmony Relay
Loại rơ leRelay typeMultifunction control relay
Loại sản phẩmProduct or component typeModular measurement and control relays
Thông số rơ le giám sátRelay monitored parametersPhase sequence | Asymmetry | Undervoltage and overvoltage in window mode | Phase failure detection
Ứng dụngProduct specific applicationFor 3-phase supply
Tên rơ leRelay nameRM35TF
Thông số bổ sung
Giới hạn điện áp nguồnSupply voltage limits194…528 V AC, 3 phases
Tần số nguồnSupply frequency50/60 Hz +/- 10 %
Power consumption in VA0…22 VA at 400 V AC 50 Hz
Voltage detection threshold< 194 V
Maximum measuring cycle140 ms measurement cycle as true rms value
Threshold adjustment voltage2…20 % of Un selected | -12…-2 % in the range 220 V AC | +2…+10 % in the range 480 V AC | -20…-2 % in the range 380…480 V AC | +2…+20 % in the range 220…440 V AC
Hysteresis2 %
Adjustment of asymmetry threshold5…15 % of Un selected
Measurement error< 1 % over the whole range with voltage variation | 0.05 %/°C with temperature variation
Kiểu trễ thời gianTime delay typeAdjustable 0.1…10 s, +/- 10 % of the full scale value
Thời gian resetReset time1500 ms at 480 V
Response time< 200 ms (in the event of a fault)
Output contacts2 C/O
Dòng ra định mứcnominal output current5 A
Điện áp đóng cắt tối đaMaximum switching voltage250 V AC
Switching capacity in VA1250 VA
Dòng đóng cắt tối thiểuMinimum switching current10 mA at 5 V DC
Dòng đóng cắt tối đaMaximum switching current5 A AC | 5 A DC
Độ bền điệnElectrical durability100000 cycles
Độ bền cơ khíMechanical durability30000000 cycles
Giới hạn điện áp mạch điều khiểnControl circuit voltage limits- 12 % + 10 % Un
Control circuit frequency50…60 Hz +/- 10 %
Môi trường & tiêu chuẩn
Tương thích điện từ (EMC)Electromagnetic compatibilityEmission standard for industrial environments conforming to IEC 61000-6-4 | Emission standard for residential, commercial and light-industrial environments conforming to IEC 61000-6-3 | Immunity for industrial environments conforming to IEC 61000-6-2
Tiêu chuẩnStandardsIEC 60255-1
Chứng nhậnProduct certificationsCSA | C-Tick | GL | GOST | UL
Ký hiệuMarkingCE
Directives89/336/EEC - electromagnetic compatibility | 73/23/EEC - low voltage directive
Nhiệt độ bảo quảnAmbient air temperature for storage-40…70 °C
Nhiệt độ môi trường khi vận hànhAmbient air temperature for operation-20…50 °C
Độ ẩm tương đốiRelative humidity95 % at 55 °C conforming to IEC 60068-2-30
Cấp bảo vệ IPIP degree of protectionIP20 (terminals) conforming to IEC 60529 | IP30 (casing) conforming to IEC 60529
Cấp ô nhiễmPollution degree3 conforming to IEC 60664-1
Cấp quá ápOvervoltage categoryIII conforming to IEC 60664-1
Dielectric test voltage2 kV, 1 min AC 50 Hz
Điện trở cách điệnInsulation resistance> 500 MOhm at 500 V DC conforming to IEC 60255-5
[Ui] Điện áp cách điện định mức[Ui] rated insulation voltage400 V conforming to IEC 60664-1
Vị trí lắp đặtOperating positionAny position without derating
Kiểu đấu nối - đầu cựcConnections - terminalsScrew terminals, 1 x 0.5…1 x 4 mm² (20 AWG…11 AWG) solid without cable end | Screw terminals, 2 x 0.5…2 x 2.5 mm² (20 AWG…14 AWG) solid without cable end | Screw terminals, 1 x 0.2…1 x 2.5 mm² (24 AWG…12 AWG) flexible with cable end | Screw terminals, 2 x 0.2…2 x 1.5 mm² (24 AWG…16 AWG) flexible with cable end
Mô-men siếtTightening torque0.6…1 N.m conforming to IEC 60947-1
Housing materialPolycarbonate
Báo hiệu tại chỗLocal signallingLED (green) for power ON | LED (yellow) for relay ON | LED (yellow) for fault
Kiểu lắp đặtMounting support35 mm symmetrical DIN rail conforming to IEC 60715
Reliability dataB10d = 360000 | MTTFd = 399.5 years
Chiều rộngWidth35 mm
Khối lượng tịnhNet weight0.13 kg

Đóng gói

Cấp đóng góiĐơn vịSố lượngD × R × CKhối lượng
Cấp 1PCE14.500 × 9.600 × 7.800 cm138.000 g
Cấp 2S011240.000 × 15.000 × 15.000 cm1.785 kg

Tài liệu

Tài liệu mở tại website Schneider Electric.

Mã khác trong dòng Zelio Control

Xem toàn bộ dòng Zelio Control (128 mã) →

Câu hỏi thường gặp

Hỏi đáp về RM35TF30SP01

RM35TF30SP01 còn mua được không?

RM35TF30SP01 đã ngừng sản xuất từ 01/11/2020. Mã thay thế Schneider công bố: RM35TF30. Fast Group đối chiếu thông số trước khi báo giá.

Mã vạch (GTIN/EAN) của RM35TF30SP01 là gì?

GTIN-13 của RM35TF30SP01 là 3389119215442, dùng để đối chiếu nhãn hàng khi nhận hàng.

Mua modular measurement and control relays Schneider RM35TF30SP01 chính hãng ở đâu?

Fast Group cung cấp modular measurement and control relays Schneider RM35TF30SP01 chính hãng, CO/CQ đầy đủ theo lô, giao toàn quốc từ TP.HCM và Vũng Tàu. RFQ nhận trước 16:00 được phản hồi trong ngày làm việc.