










RM35S0MW Speed control relay Schneider Zelio Control
Speed control relay Schneider Electric RM35S0MW thuộc dòng Zelio Control: dòng đóng cắt tối thiểu 10 mA ở 5 V DC; loại rơ le Speed control relays; tên rơ le RM35S; thông số rơ le giám sát Overspeed, Underspeed.
- Loại rơ le
- Speed control relays
- Tên rơ le
- RM35S
- Thông số rơ le giám sát
- Overspeed | Underspeed
- Dải thời gian trễ
- 0.6…60 s adjustable on energisation delay (tolerance: 0…10 % of the full scale value)
- Switching capacity in VA
- 1250 VA
- Dòng đóng cắt tối thiểu
- 10 mA at 5 V DC
- Maximum power consumption in VA
- 5 VA AC
- Measurement range
- 0.05…0.5 s | 0.5…5 min | 1…10 min | 1…10 s | 0.5…5 s | 0.1…1 s | 0.1…1 min
- GTIN / EAN-13
- 3389119405256
- Xuất xứ (tham khảo)
- Indonesia
- Bảo hành hãng
- 18 tháng
- Hàng Schneider chính hãng
- CO/CQ đầy đủ
- Cấp hàng nhanh
Mô tả RM35S0MW
RM35S0MW là speed control relay thuộc dòng Zelio Control của Schneider Electric. Thông số định mức chính: Loại rơ le Speed control relays; Tên rơ le RM35S; Thông số rơ le giám sát Overspeed, Underspeed; Dải thời gian trễ 0.6…60 s adjustable on energisation delay (tolerance: 0…10 % of the full scale value).
Đặc tính kỹ thuật nổi bật
- Switching capacity in VA: 1250 VA
- Dòng đóng cắt tối thiểu: 10 mA ở 5 V DC
- Maximum power consumption in VA: 5 VA AC
- Measurement range: 0.05…0.5 s, 0.5…5 min, 1…10 min, 1…10 s, 0.5…5 s, 0.1…1 s, …
- Loại tải sử dụng: AC-12 theo IEC 60947-5-1, AC-13 theo IEC 60947-5-1, AC-14 theo IEC 60947-5-1, AC-15 theo IEC 60947-5-1, DC-12 theo IEC 60947-5-1, DC-13 theo IEC 60947-5-1, …
- Measurement range: 0.05…600 s
- time delay: Adjustable 0.6…60 s Ti- inhibition time delay upon startup
Lắp đặt
Về lắp đặt, RM35S0MW có lắp trên 35 mm symmetrical DIN rail theo IEC 60715; đấu nối kiểu Screw terminals, 1 x 0.5…1 x 4 mm² (20 AWG…11 AWG) solid without cable end, Screw terminals, 2 x 0.5…2 x 2.5 mm² (20 AWG…14 AWG) solid without cable end, Screw terminals, 1 x 0.2…1 x 2.5 mm² (24 AWG…12 AWG) dây mềm có đầu cốt, Screw terminals, 2 x 0.2…2 x 1.5 mm² (24 AWG…16 AWG) dây mềm có đầu cốt; mô-men siết 0.6…1 N.m theo IEC 60947-1.
Môi trường làm việc
Điều kiện làm việc theo dữ liệu của hãng: cấp bảo vệ IP20 (terminals) theo IEC 60529, IP30 (casing) theo IEC 60529; nhiệt độ môi trường khi vận hành -20…50 °C; nhiệt độ bảo quản -40…70 °C; độ ẩm tương đối 95 % ở 55 °C theo IEC 60068-2-30; cấp ô nhiễm 3 theo IEC 60664-1.
Tiêu chuẩn, chứng nhận và độ bền
RM35S0MW đáp ứng tiêu chuẩn NF EN 60255-6, IEC 60255-6; chứng nhận C-Tick, GOST, UL, GL, CSA; độ bền cơ khí 30000000 cycles; độ bền điện 100000 cycles.
Tình trạng sản xuất
RM35S0MW đang được Schneider Electric sản xuất và bán thương mại.
Đặt hàng
Thông tin đặt hàng: mã vạch GTIN-13 3389119405256; đóng gói cấp 1: 1 PCE; bảo hành hãng 18 tháng; xuất xứ tham khảo Indonesia (theo dữ liệu thị trường quốc tế, có thể khác theo lô hàng về Việt Nam). Fast Group cung cấp hàng Schneider Electric chính hãng, CO/CQ đầy đủ theo lô; gửi mã RM35S0MW và số lượng qua form RFQ để nhận báo giá.
Thông số kỹ thuật RM35S0MW
Tên thông số giữ thuật ngữ tiếng Anh của Schneider (chữ nhỏ) để tiện đối chiếu datasheet.
Thông số chính
| Dòng sản phẩmRange of product | Harmony Control Relays |
|---|---|
| Loại rơ leRelay type | Speed control relays |
| Loại sản phẩmProduct or component type | Speed control relay |
| Tên rơ leRelay name | RM35S |
| Thông số rơ le giám sátRelay monitored parameters | Overspeed | Underspeed |
| Dải thời gian trễTime delay range | 0.6…60 s adjustable on energisation delay (tolerance: 0…10 % of the full scale value) |
| Switching capacity in VA | 1250 VA |
| Dòng đóng cắt tối thiểuMinimum switching current | 10 mA at 5 V DC |
| Maximum power consumption in VA | 5 VA AC |
| Measurement range | 0.05…0.5 s | 0.5…5 min | 1…10 min | 1…10 s | 0.5…5 s | 0.1…1 s | 0.1…1 min |
| Loại tải sử dụngUtilisation category | AC-12 conforming to IEC 60947-5-1 | AC-13 conforming to IEC 60947-5-1 | AC-14 conforming to IEC 60947-5-1 | AC-15 conforming to IEC 60947-5-1 | DC-12 conforming to IEC 60947-5-1 | DC-13 conforming to IEC 60947-5-1 | DC-14 conforming to IEC 60947-5-1 |
| Measurement range | 0.05…600 s |
| time delay | Adjustable 0.6…60 s Ti- inhibition time delay upon startup |
Thông số bổ sung
| rest time in memory mode | 50 ms contact S2 in memory mode on time delay | 1 s supply Un in memory mode on time delay |
|---|---|
| Điện áp đóng cắt tối đaMaximum switching voltage | 250 V AC/DC |
| [Un] rated nominal voltage | 24…240 V AC/DC 50/60 Hz, non self-powered |
| Giới hạn điện áp nguồnSupply voltage limits | 20.4…264 V AC/DC |
| Maximum power consumption in W | 3 W DC |
| Chiều rộngWidth | 35 mm |
| Output contacts | 1 C/O |
| Vật liệu tiếp điểmContacts material | Cadmium free |
| Dòng ra định mứcnominal output current | 5 A |
| delay at power up | 0.05 s |
| Hysteresis | 5 % of threshold |
| Measurement accuracy | +/- 10 % of the full scale value |
| Repeat accuracy | +/- 0.5 % for input and measurement circuit | +/- 0.5 % for time delay |
| Measurement error | +/- 0.1 %/°C with temperature variation | < +/- 1 % over the whole range with voltage variation |
| Input frequency | 0.0017…20 Hz |
| Response time | 15 ms max (on crossing the threshold) |
| Polarity | Reversible polarity on DC supply |
| Threshold setting | 10…100 % |
| supply voltage for sensor | 11.5…12.5 V |
| Maximum supply current for sensors | 40 mA for < 24 V AC at 25 °C | 40 mA for < 24 V DC at 25 °C | 50 mA for 24…240 V AC | 50 mA for 24…240 V DC |
| Impulse duration | >= 5 ms high state | >= 5 ms low state |
| Input compatibility | 3-wire sensor (E1) PNP or NPN, 12 V, 50 mA | NAMUR sensor (E2), 12 V, 1.5 kOhm | Voltage input (E1), 0…30 V, 9.5 kOhm, high state >= 4.5 V low state <= 1 V | Volt-free contact input (E1), 12 V, 9.5 kOhm |
| Ký hiệuMarking | CE : EMC 89/336/EEC | CE : 73/23/EEC |
| Cấp quá ápOvervoltage category | III conforming to IEC 60664-1 |
| Điện trở cách điệnInsulation resistance | > 500 MOhm at 500 V DC between supply and relay output conforming to IEC 60255-5 | > 500 MOhm at 500 V DC between measurement and relay output conforming to IEC 60664-1 | > 1 MOhm at 500 V DC between supply and measurement conforming to IEC 60255-5 | > 500 MOhm at 500 V DC between supply and relay output conforming to IEC 60664-1 | > 500 MOhm at 500 V DC between measurement and relay output conforming to IEC 60255-5 | > 1 MOhm at 500 V DC between supply and measurement conforming to IEC 60664-1 |
| [Ui] Điện áp cách điện định mức[Ui] rated insulation voltage | 250 V conforming to IEC 60664-1 |
| operating voltage tolerance | - 15 % + 10 % Un |
| Tần số nguồnSupply frequency | 50/60 Hz +/- 10 % |
| Vị trí lắp đặtOperating position | Any position without derating |
| Kiểu đấu nối - đầu cựcConnections - terminals | Screw terminals, 1 x 0.5…1 x 4 mm² (20 AWG…11 AWG) solid without cable end | Screw terminals, 2 x 0.5…2 x 2.5 mm² (20 AWG…14 AWG) solid without cable end | Screw terminals, 1 x 0.2…1 x 2.5 mm² (24 AWG…12 AWG) flexible with cable end | Screw terminals, 2 x 0.2…2 x 1.5 mm² (24 AWG…16 AWG) flexible with cable end |
| Mô-men siếtTightening torque | 0.6…1 N.m conforming to IEC 60947-1 |
| Housing material | Polycarbonate |
| Đèn LED trạng tháiStatus LED | 1 LED green for power ON | 1 LED yellow for inhibit | 1 LED yellow for relay (R) |
| Kiểu lắp đặtMounting support | 35 mm symmetrical DIN rail conforming to IEC 60715 |
| Độ bền điệnElectrical durability | 100000 cycles |
| Độ bền cơ khíMechanical durability | 30000000 cycles |
| Operating rate | <= 360 operations/hour full load |
| Kiểu điều khiểnControl type | Without test button |
Môi trường & tiêu chuẩn
| Immunity to microbreaks | 50 ms |
|---|---|
| Tương thích điện từ (EMC)Electromagnetic compatibility | Emission standard for industrial environments conforming to IEC 61000-6-4 | Emission standard for residential, commercial and light-industrial environments conforming to IEC 61000-6-3 | Immunity for industrial environments conforming to NF EN/IEC 61000-6-2 |
| Tiêu chuẩnStandards | NF EN 60255-6 | IEC 60255-6 |
| Chứng nhậnProduct certifications | C-Tick | GOST | UL | GL | CSA |
| Nhiệt độ bảo quảnAmbient air temperature for storage | -40…70 °C |
| Nhiệt độ môi trường khi vận hànhAmbient air temperature for operation | -20…50 °C |
| Độ ẩm tương đốiRelative humidity | 95 % at 55 °C conforming to IEC 60068-2-30 |
| Khả năng chịu rungVibration resistance | 0.35 mm (f= 5…57.6 Hz) conforming to IEC 60068-2-6/IEC 60255-21-1 | 1 gn (f= 57.6…150 Hz) conforming to IEC 60068-2-6/IEC 60255-21-1 |
| Khả năng chịu sốcShock resistance | 15 gn for 11 ms conforming to IEC 60255-21-1 |
| Cấp bảo vệ IPIP degree of protection | IP20 (terminals) conforming to IEC 60529 | IP30 (casing) conforming to IEC 60529 |
| Cấp ô nhiễmPollution degree | 3 conforming to IEC 60664-1 |
| Dielectric test voltage | 2 kV AC 50 Hz |
| Non-dissipating shock wave | 4 kV |
Đóng gói
| Cấp đóng gói | Đơn vị | Số lượng | D × R × C | Khối lượng |
|---|---|---|---|---|
| Cấp 1 | PCE | 1 | 9.400 × 7.400 × 4.400 cm | 133.000 g |
| Cấp 2 | S03 | 48 | 40.000 × 30.000 × 30.000 cm | 7.181 kg |
Tài liệu
- Datasheet RM35S0MW (PDF)Datasheet
- Discover Harmony Control Relays Catalog - EnglishCatalog
- MCADID0001778_3D-CADCAD 2D/3D
- MCADID0001778_3D-simplified.stpCAD 2D/3D
- MCADID0001778_2D-back.dwgCAD 2D/3D
- CNCA-CCC RM35Chứng chỉ
- DNV Certificate RM17 RM35Chứng chỉ
- CSA Certificate RM17, RM22, RM35Chứng chỉ
- Manufacturer EU DOC RM17 and RM35Tuyên bố hợp chuẩn (DoC)
- RCM SDOC RM17 RM35Tuyên bố hợp chuẩn (DoC)
- Manufacturer UK DOC RM17 RM35Tuyên bố hợp chuẩn (DoC)
- RM35... Measurement and Control Relay, Product Environmental profileHồ sơ môi trường (PEP)
Tài liệu mở tại website Schneider Electric.
Video
- Choose the best Relay for your Applications | Schneider ElectricVideo giới thiệu
- How to prevent circuit damage from back EMF?Video giới thiệu
Mã liên quan
Thường mua kèm
| Mã | Mô tả (Schneider) |
|---|---|
RM17TE00 | Harmony, 3 phase supply control relay, range 208 to 480 VAC, sequence, phase failure, phase imbalance, voltage |
RM22TG20 | Harmony, Modular 3-phase supply control relay, 8A, 2 CO, 183…528VAC |
RM22TR33 | 3-phase control relay, Harmony Control Relays, 8A, 2CO, 380...480V AC |
RM35TF30 | Harmony, 3 phase supply control relay, range 220 to 480 VAC, sequence, phase failure, phase imbalance, voltage |
RMNF22TB30 | 3-phase control relay, Harmony Control Relays, 8A, 2CO, overfrequency and underfrequency, 208…480V AC |
Mã khác trong dòng Zelio Control
Hỏi đáp về RM35S0MW
RM35S0MW còn sản xuất không?
Có. Theo dữ liệu Schneider Electric, RM35S0MW đang được sản xuất và bán thương mại. Fast Group kiểm tra hàng sẵn và thời gian giao khi báo giá.
Mã vạch (GTIN/EAN) của RM35S0MW là gì?
GTIN-13 của RM35S0MW là 3389119405256, dùng để đối chiếu nhãn hàng khi nhận hàng.
Mua speed control relay Schneider RM35S0MW chính hãng ở đâu?
Fast Group cung cấp speed control relay Schneider RM35S0MW chính hãng, CO/CQ đầy đủ theo lô, giao toàn quốc từ TP.HCM và Vũng Tàu. RFQ nhận trước 16:00 được phản hồi trong ngày làm việc.