Hàng Schneider chính hãngCO/CQ đầy đủCấp hàng nhanhZalo / Hotline (+84) 938 888 958
RM17JA12M7 Rơ le giám sát dòng điện Schneider Harmony Control Relays
Hình ảnh tham khảo © Schneider Electric
RM17JA12M7 – ảnh 2RM17JA12M7 – ảnh 3RM17JA12M7 – ảnh 4RM17JA12M7 – ảnh 5RM17JA12M7 – ảnh 6RM17JA12M7 – ảnh 7RM17JA12M7 – ảnh 8RM17JA12M7 – ảnh 9RM17JA12M7 – ảnh 10RM17JA12M7 – ảnh 11
Schneider Electric · Zelio Control

RM17JA12M7 Rơ le giám sát dòng điện Schneider Zelio Control

Đang sản xuất

Rơ le giám sát dòng điện Schneider Electric RM17JA12M7 thuộc dòng Zelio Control: loại rơ le Current control relay; tên rơ le RM17JA; thông số rơ le giám sát Overcurrent or undercurrent in window mode, Overcurrent or undercurrent detection; kiểu điều khiển Without test button.

Loại rơ le
Current control relay
Tên rơ le
RM17JA
Thông số rơ le giám sát
Overcurrent or undercurrent in window mode | Overcurrent or undercurrent detection
Kiểu điều khiển
Without test button
Loại và cấu tạo tiếp điểm
1 C/O
Xuất xứ (tham khảo)
Indonesia
Bảo hành hãng
18 tháng
  • Hàng Schneider chính hãng
  • CO/CQ đầy đủ
  • Cấp hàng nhanh

Mô tả RM17JA12M7

RM17JA12M7 là rơ le giám sát dòng điện thuộc dòng Zelio Control của Schneider Electric. Thông số định mức chính: Loại rơ le Current control relay; Tên rơ le RM17JA; Thông số rơ le giám sát Overcurrent or undercurrent in window mode, Overcurrent or undercurrent detection; Kiểu điều khiển Without test button.

Đặc tính kỹ thuật nổi bật

  • Loại và cấu tạo tiếp điểm: 1 C/O

Lắp đặt

Về lắp đặt, RM17JA12M7 có lắp trên 35 mm symmetrical DIN rail theo IEC 60715; kích thước rộng × cao × sâu 17.5 mm | 17.8 mm × 90 mm | 88.9 mm × 72 mm | 71.1 mm; khối lượng tịnh 0.08 kg, 0.08 kg; đấu nối kiểu Screw terminals, 1 x 0.5…1 x 3.3 mm² (20 AWG…12 AWG) solid without cable end, Screw terminals, 2 x 0.5…2 x 2.5 mm² (20 AWG…14 AWG) solid without cable end, Screw terminals, 1 x 0.5…1 x 2.5 mm² (20 AWG…14 AWG) dây mềm có đầu cốt, Screw terminals, 2 x 0.5…2 x 1.5 mm² (20 AWG…16 AWG) dây mềm có đầu cốt; mô-men siết 5.3…8.8 lb.in, 0.6…1 N.m.

Môi trường làm việc

Điều kiện làm việc theo dữ liệu của hãng: cấp bảo vệ IP20 (terminals) theo IEC 60529, IP30 (housing) theo IEC 60529, IP50 (front panel) theo IEC 60529; nhiệt độ môi trường khi vận hành -20…60 °C; nhiệt độ bảo quản -40…70 °C, -40…70 °C; độ ẩm tương đối 93…97 % ở 25…55 °C theo IEC 60068-2-30; cấp ô nhiễm 3 theo IEC 60664-1.

Tiêu chuẩn, chứng nhận và độ bền

RM17JA12M7 đáp ứng tiêu chuẩn EN/IEC 60255-1, UL 508; chứng nhận DNV-GL, cULus, UKCA, RCM, CE, CCC; độ bền cơ khí 10000000 cycles; độ bền điện 100000 cycles.

Tình trạng sản xuất

RM17JA12M7 đang được Schneider Electric sản xuất và bán thương mại.

Đặt hàng

Thông tin đặt hàng: đóng gói cấp 1: 1 PCE; bảo hành hãng 18 tháng; xuất xứ tham khảo Indonesia (theo dữ liệu thị trường quốc tế, có thể khác theo lô hàng về Việt Nam). Fast Group cung cấp hàng Schneider Electric chính hãng, CO/CQ đầy đủ theo lô; gửi mã RM17JA12M7 và số lượng qua form RFQ để nhận báo giá.

Thông số kỹ thuật RM17JA12M7

Tên thông số giữ thuật ngữ tiếng Anh của Schneider (chữ nhỏ) để tiện đối chiếu datasheet.

Thông số chính

Dòng sản phẩmRange of productHarmony Control Relays
Loại rơ leRelay typeCurrent control relay
Loại sản phẩmProduct or component typeCurrent control relay
Tên rơ leRelay nameRM17JA
Thông số rơ le giám sátRelay monitored parametersOvercurrent or undercurrent in window mode | Overcurrent or undercurrent detection
Kiểu điều khiểnControl typeWithout test button
Loại và cấu tạo tiếp điểmContacts type and composition1 C/O
Thông số bổ sung
[Us] Điện áp nguồn định mức[Us] rated supply voltage220…240 V AC/DC 50/60 Hz, self-powered
Giới hạn điện áp nguồnSupply voltage limits198…264 V AC
Maximum power consumption in VA12 VA AC
Measurement range0.5…10 A current AC 50/60 Hz
Maximum measuring cycle100 ms measurement cycle as true rms value
Hysteresis5…50 % adjustable of threshold setting | 3 % fixed of full scale for window mode
Setting accuracy of the switching threshold+/- 10 % of the full scale
Repeat accuracy+/- 0.5 % for input and measurement circuit | +/- 2 % for time delay
Measurement error< 1 % over the whole range with voltage variation | 0.5 %/°C with temperature variation
Kiểu trễ thời gianTime delay typeAdjustable 0.1…30 s, +/- 10 % of the full scale value Tt- time delay upon fault
Thời gian resetReset time1500 ms time delay
Power on Delay500 ms
Output contacts1 C/O
Dòng ra định mứcnominal output current5 A
Điện áp đóng cắt tối đaMaximum switching voltage250 V AC
Switching capacity in VA1250 VA
Dòng đóng cắt tối thiểuMinimum switching current10 mA at 12 V AC
Dòng đóng cắt tối đaMaximum switching current5 A AC/DC
Độ bền điệnElectrical durability100000 cycles
Độ bền cơ khíMechanical durability10000000 cycles
operating voltage tolerance- 10 % + 10 % Un
Control circuit frequency50…60 Hz +/- 5 %
Resistance across terminals0.005 Ohm at L - Li
Measurement accuracy+/- 10 % of the full scale value
Threshold setting10…100 %
InsulationBetween supply and measurement
Mô-men siếtTightening torque5.3…8.8 lb.in | 0.6…1 N.m
Môi trường & tiêu chuẩn
Tương thích điện từ (EMC)Electromagnetic compatibilityEmission standard for industrial environments conforming to IEC 61000-6-4 | Emission standard for residential, commercial and light-industrial environments conforming to IEC 61000-6-3 | Immunity for industrial environments conforming to NF EN/IEC 61000-6-2
Tiêu chuẩnStandardsEN/IEC 60255-1 | UL 508
Chứng nhậnProduct certificationsDNV-GL | cULus | UKCA | RCM | CE | CCC
Ký hiệuMarkingROHS | WEEE | China RoHS
Nhiệt độ bảo quảnAmbient air temperature for storage-40…70 °C | -40…70 °C
Nhiệt độ môi trường khi vận hànhAmbient air temperature for operation-20…60 °C
Độ ẩm tương đốiRelative humidity93…97 % at 25…55 °C conforming to IEC 60068-2-30
Cấp bảo vệ IPIP degree of protectionIP20 (terminals) conforming to IEC 60529 | IP30 (housing) conforming to IEC 60529 | IP50 (front panel) conforming to IEC 60529
Cấp ô nhiễmPollution degree3 conforming to IEC 60664-1
Cấp quá ápOvervoltage categoryIII conforming to IEC 60664-1
Dielectric test voltage2 kV, 1 min AC 50 Hz conforming to IEC 60255-5
Điện trở cách điệnInsulation resistance> 500 MOhm at 500 V DC between supply and relay output conforming to IEC 60255-5
[Ui] Điện áp cách điện định mức[Ui] rated insulation voltage250 V conforming to IEC 60664-1
Vị trí lắp đặtOperating positionAny position without derating
Kiểu đấu nối - đầu cựcConnections - terminalsScrew terminals, 1 x 0.5…1 x 3.3 mm² (20 AWG…12 AWG) solid without cable end | Screw terminals, 2 x 0.5…2 x 2.5 mm² (20 AWG…14 AWG) solid without cable end | Screw terminals, 1 x 0.5…1 x 2.5 mm² (20 AWG…14 AWG) flexible with cable end | Screw terminals, 2 x 0.5…2 x 1.5 mm² (20 AWG…16 AWG) flexible with cable end
Housing materialPolycarbonate
Báo hiệu tại chỗLocal signallingLED (green) for power ON | LED (yellow) for relay ON
Kiểu lắp đặtMounting support35 mm symmetrical DIN rail conforming to IEC 60715
Chiều caoHeight90 mm | 88.9 mm
Chiều rộngWidth17.5 mm | 17.8 mm
Chiều sâuDepth72 mm | 71.1 mm
Khối lượng tịnhNet weight0.08 kg | 0.08 kg

Đóng gói

Cấp đóng góiĐơn vịSố lượngD × R × CKhối lượng
Cấp 1PCE110.000 × 7.900 × 2.700 cm84.000 g
Cấp 2S024840.000 × 30.000 × 15.000 cm4.352 kg
Cấp 3P06115280.000 × 60.000 × 104.600 cm112.943 kg

Tài liệu

Tài liệu mở tại website Schneider Electric.

Video

Mã liên quan

Thường mua kèm

MãMô tả (Schneider)
METSECT5CC005current transformer tropicalised DIN mount 50 5 for cables d. 21

Mã khác trong dòng Zelio Control

Xem toàn bộ dòng Zelio Control (128 mã) →

Câu hỏi thường gặp

Hỏi đáp về RM17JA12M7

RM17JA12M7 còn sản xuất không?

Có. Theo dữ liệu Schneider Electric, RM17JA12M7 đang được sản xuất và bán thương mại. Fast Group kiểm tra hàng sẵn và thời gian giao khi báo giá.

Mua rơ le giám sát dòng điện Schneider RM17JA12M7 chính hãng ở đâu?

Fast Group cung cấp rơ le giám sát dòng điện Schneider RM17JA12M7 chính hãng, CO/CQ đầy đủ theo lô, giao toàn quốc từ TP.HCM và Vũng Tàu. RFQ nhận trước 16:00 được phản hồi trong ngày làm việc.