Hàng Schneider chính hãngCO/CQ đầy đủCấp hàng nhanhZalo / Hotline (+84) 938 888 958
RM10TE00
Modular measurement and control relays
Chưa có hình ảnh
Schneider Electric · Zelio Control

RM10TE00 Modular measurement and control relays Schneider Zelio Control

Đang sản xuất

Modular measurement and control relays Schneider Electric RM10TE00 thuộc dòng Zelio Control: loại rơ le Multifunction control relay; tên rơ le RM10TE; thông số rơ le giám sát Phase sequence, Asymmetry, Undervoltage and overvoltage in window mode, Phase failure detection.

Loại rơ le
Multifunction control relay
Tên rơ le
RM10TE
Thông số rơ le giám sát
Phase sequence | Asymmetry | Undervoltage and overvoltage in window mode | Phase failure detection
Bảo hành hãng
18 tháng
  • Hàng Schneider chính hãng
  • CO/CQ đầy đủ
  • Cấp hàng nhanh

Mô tả RM10TE00

RM10TE00 là modular measurement and control relays thuộc dòng Zelio Control của Schneider Electric. Thông số định mức chính: Loại rơ le Multifunction control relay; Tên rơ le RM10TE; Thông số rơ le giám sát Phase sequence, Asymmetry, Undervoltage and overvoltage in window mode, Phase failure detection.

Đặc tính kỹ thuật nổi bật

  • Ứng dụng: For 3-phase supply

Lắp đặt

Về lắp đặt, RM10TE00 có lắp trên 35 mm symmetrical DIN rail theo IEC 60715; kích thước rộng × cao × sâu 17.5 mm | 17.8 mm × 90 mm | 88.9 mm × 72 mm | 71.1 mm; khối lượng tịnh 0.08 kg, 0.08 kg; đấu nối kiểu Screw terminals, 1 x 0.5…1 x 4 mm² (20 AWG…11 AWG) solid without cable end, Screw terminals, 2 x 0.5…2 x 2.5 mm² (20 AWG…14 AWG) solid without cable end, Screw terminals, 1 x 0.2…1 x 2.5 mm² (24 AWG…12 AWG) dây mềm có đầu cốt, Screw terminals, 2 x 0.2…2 x 1.5 mm² (24 AWG…16 AWG) dây mềm có đầu cốt; mô-men siết 0.6…1 N.m theo IEC 60947-1.

Môi trường làm việc

Điều kiện làm việc theo dữ liệu của hãng: cấp bảo vệ IP20 (terminals) theo IEC 60529, IP30 (casing) theo IEC 60529; nhiệt độ môi trường khi vận hành -20…50 °C; nhiệt độ bảo quản -40…70 °C, -40…70 °C; độ ẩm tương đối 95 % ở 55 °C theo IEC 60068-2-30; cấp ô nhiễm 3 theo IEC 60664-1.

Tiêu chuẩn, chứng nhận và độ bền

RM10TE00 đáp ứng tiêu chuẩn IEC 60255-1; chứng nhận C-Tick, UL, GOST, CSA, GL; độ bền cơ khí 30000000 cycles; độ bền điện 100000 cycles.

Tình trạng sản xuất

RM10TE00 đang được Schneider Electric sản xuất và bán thương mại.

Đặt hàng

Thông tin đặt hàng: đóng gói cấp 1: 1 PCE; bảo hành hãng 18 tháng. Fast Group cung cấp hàng Schneider Electric chính hãng, CO/CQ đầy đủ theo lô; gửi mã RM10TE00 và số lượng qua form RFQ để nhận báo giá.

Thông số kỹ thuật RM10TE00

Tên thông số giữ thuật ngữ tiếng Anh của Schneider (chữ nhỏ) để tiện đối chiếu datasheet.

Thông số chính

Dòng sản phẩmRange of productHarmony Relay
Loại rơ leRelay typeMultifunction control relay
Loại sản phẩmProduct or component typeModular measurement and control relays
Tên rơ leRelay nameRM10TE
Thông số rơ le giám sátRelay monitored parametersPhase sequence | Asymmetry | Undervoltage and overvoltage in window mode | Phase failure detection
Ứng dụngProduct specific applicationFor 3-phase supply
Thông số bổ sung
Giới hạn điện áp nguồnSupply voltage limits183…528 V AC
Tần số nguồnSupply frequency50/60 Hz +/- 10 %
Power consumption in VA0…22 VA at 400 V AC 50 Hz
Maximum measuring cycle150 ms measurement cycle as true rms value
Threshold adjustment voltage2…20 % of Un selected | -2…-17 % in the range 220 V AC | +2…+10 % in the range 480 V AC | -2…-12 % in the range 208 V AC
Hysteresis2 %
Adjustment of asymmetry threshold5…15 % of Un selected
Measurement error< 0.05 %/°C with temperature variation | < 1 % over the whole range with voltage variation
Kiểu trễ thời gianTime delay typeAdjustable 0.1…10 s, +/- 10 % of the full scale value
Setting accuracy of time delay10 %
Thời gian resetReset time1500 ms time delay
Response time< 200 ms (in the event of a fault)
Output contacts1 C/O
Dòng ra định mứcnominal output current5 A
Điện áp đóng cắt tối đaMaximum switching voltage250 V AC
Switching capacity in VA1250 VA
Dòng đóng cắt tối thiểuMinimum switching current10 mA at 5 V DC
Dòng đóng cắt tối đaMaximum switching current5 A AC | 5 A DC
Độ bền điệnElectrical durability100000 cycles
Độ bền cơ khíMechanical durability30000000 cycles
Giới hạn điện áp mạch điều khiểnControl circuit voltage limits- 12 % + 10 % Un
Control circuit frequency50…60 Hz +/- 10 %
Độ nhạy mất phaPhase failure sensitivity0.7 Un
Môi trường & tiêu chuẩn
Tương thích điện từ (EMC)Electromagnetic compatibilityEmission standard for industrial environments conforming to IEC 61000-6-4 | Emission standard for residential, commercial and light-industrial environments conforming to IEC 61000-6-3 | Immunity for industrial environments conforming to IEC 61000-6-2
Tiêu chuẩnStandardsIEC 60255-1
Chứng nhậnProduct certificationsC-Tick | UL | GOST | CSA | GL
Ký hiệuMarkingCE
Directives89/336/EEC - electromagnetic compatibility | 73/23/EEC - low voltage directive
Nhiệt độ bảo quảnAmbient air temperature for storage-40…70 °C | -40…70 °C
Nhiệt độ môi trường khi vận hànhAmbient air temperature for operation-20…50 °C
Độ ẩm tương đốiRelative humidity95 % at 55 °C conforming to IEC 60068-2-30
Cấp bảo vệ IPIP degree of protectionIP20 (terminals) conforming to IEC 60529 | IP30 (casing) conforming to IEC 60529
Cấp ô nhiễmPollution degree3 conforming to IEC 60664-1
Cấp quá ápOvervoltage categoryIII conforming to IEC 60664-1
Dielectric test voltage2 kV, 1 min AC 50 Hz conforming to IEC 60255-5
Điện trở cách điệnInsulation resistance> 500 MOhm at 500 V DC conforming to IEC 60255-5
[Ui] Điện áp cách điện định mức[Ui] rated insulation voltage400 V conforming to IEC 60664-1
Vị trí lắp đặtOperating positionAny position without derating
Kiểu đấu nối - đầu cựcConnections - terminalsScrew terminals, 1 x 0.5…1 x 4 mm² (20 AWG…11 AWG) solid without cable end | Screw terminals, 2 x 0.5…2 x 2.5 mm² (20 AWG…14 AWG) solid without cable end | Screw terminals, 1 x 0.2…1 x 2.5 mm² (24 AWG…12 AWG) flexible with cable end | Screw terminals, 2 x 0.2…2 x 1.5 mm² (24 AWG…16 AWG) flexible with cable end
Mô-men siếtTightening torque0.6…1 N.m conforming to IEC 60947-1
Housing materialPolycarbonate
Báo hiệu tại chỗLocal signallingLED (green) for power ON | LED (yellow) for relay ON
Kiểu lắp đặtMounting support35 mm symmetrical DIN rail conforming to IEC 60715
Reliability dataB10d = 470000 | MTTFd = 502.2 years
Chiều caoHeight90 mm | 88.9 mm
Chiều rộngWidth17.5 mm | 17.8 mm
Chiều sâuDepth72 mm | 71.1 mm
Khối lượng tịnhNet weight0.08 kg | 0.08 kg

Đóng gói

Cấp đóng góiĐơn vịSố lượngD × R × CKhối lượng
Cấp 1PCE19.7 × 7.8 × 2.7 cm92 g
Cấp 2S024840 × 30 × 15 cm4830 g
Cấp 3P0676880 × 60 × 70 cm82280 g

Tài liệu

Tài liệu mở tại website Schneider Electric.

Video

Mã khác trong dòng Zelio Control

Xem toàn bộ dòng Zelio Control (128 mã) →

Câu hỏi thường gặp

Hỏi đáp về RM10TE00

RM10TE00 còn sản xuất không?

Có. Theo dữ liệu Schneider Electric, RM10TE00 đang được sản xuất và bán thương mại. Fast Group kiểm tra hàng sẵn và thời gian giao khi báo giá.

Mua modular measurement and control relays Schneider RM10TE00 chính hãng ở đâu?

Fast Group cung cấp modular measurement and control relays Schneider RM10TE00 chính hãng, CO/CQ đầy đủ theo lô, giao toàn quốc từ TP.HCM và Vũng Tàu. RFQ nhận trước 16:00 được phản hồi trong ngày làm việc.