







ATV630C16N4F Biến tần Schneider Altivar Process ATV600
Biến tần Schneider Electric ATV630C16N4F thuộc dòng Altivar Process ATV600: dòng ra định mức 302.0 A; [Us] Điện áp nguồn định mức 380…440 V - 15…10 %; [Us] Điện áp nguồn định mức 380…440 V; dung sai điện áp lưới 10 %.
- Biến thể
- Standard version
- Cách lắp
- Floor-standing
- Giao thức truyền thông
- Ethernet | Modbus TCP | Modbus serial
- [Us] Điện áp nguồn định mức
- 380…440 V - 15…10 %
- [Us] Điện áp nguồn định mức
- 380…440 V
- Dung sai điện áp lưới
- 10 %
- Dung sai tần số lưới
- 5 %
- Dòng ra định mức
- 302.0 A
- Bảo hành hãng
- 18 tháng
- Hàng Schneider chính hãng
- CO/CQ đầy đủ
- Cấp hàng nhanh
Mô tả ATV630C16N4F
ATV630C16N4F là biến tần thuộc dòng Altivar Process ATV600 của Schneider Electric. Ký hiệu thiết bị: ATV630. Thông số định mức chính: Biến thể phiên bản tiêu chuẩn; Cách lắp đặt sàn; Giao thức truyền thông Ethernet, Modbus TCP, Modbus serial; [Us] Điện áp nguồn định mức 380…440 V - 15…10 %.
Biến tần điều khiển tốc độ động cơ bằng cách thay đổi tần số và điện áp cấp, giúp tiết kiệm năng lượng và điều chỉnh tốc độ theo yêu cầu công nghệ.
Đặc tính kỹ thuật nổi bật
- Ứng dụng: Process and utilities
- Dung sai điện áp lưới: 10 %
- Dung sai tần số lưới: 5 %
- Dòng ra định mức: 302.0 A
- Cấp bảo vệ IP: IP21
- Dùng cho: động cơ không đồng bộ, động cơ đồng bộ
- Bộ lọc EMC: Integrated with 150 m theo IEC 61800-3 category C3
- Cấp bảo vệ IP: IP21 theo IEC 61800-5-1, IP21 theo IEC 60529
- Kiểu làm mát: đối lưu cưỡng bức
- Tần số nguồn: 50…60 Hz - 5…5 %
- Công suất động cơ (kW): 160 kW (tải thường), 132 kW (tải nặng)
- Dòng điện đầu vào: 251 A ở 400 V (tải thường), 210 A ở 400 V (tải nặng), 291 A ở 380 V (tải thường), 244 A ở 380 V (tải nặng)
Lắp đặt
Về lắp đặt, ATV630C16N4F có kiểu lắp đặt sàn; kích thước rộng × cao × sâu 400 mm × 2150 mm × 605 mm; khối lượng tịnh 310 kg.
Môi trường làm việc
Điều kiện làm việc theo dữ liệu của hãng: cấp bảo vệ IP21; nhiệt độ môi trường khi vận hành -15…40 °C (without derating), 40…50 °C (with derating factor); nhiệt độ bảo quản -40…70 °C; độ cao vận hành <= 1000 m without derating, 1000…4800 m with current derating 1 % per 100 m; độ ẩm tương đối 5…95 % without condensation theo IEC 60068-2-3; cấp ô nhiễm 2 theo IEC 61800-5-1.
Tiêu chuẩn, chứng nhận và độ bền
ATV630C16N4F đáp ứng tiêu chuẩn IEC 60204-1, IEC 61800-2, IEC 61800-3, IEC 61800-5-1; chứng nhận ATEX, EAC, C-Tick.
Tình trạng sản xuất
ATV630C16N4F đang được Schneider Electric sản xuất và bán thương mại.
Đặt hàng
Thông tin đặt hàng: đóng gói cấp 1: 1 PCE; bảo hành hãng 18 tháng. Fast Group cung cấp hàng Schneider Electric chính hãng, CO/CQ đầy đủ theo lô; gửi mã ATV630C16N4F và số lượng qua form RFQ để nhận báo giá.
Thông số kỹ thuật ATV630C16N4F
Tên thông số giữ thuật ngữ tiếng Anh của Schneider (chữ nhỏ) để tiện đối chiếu datasheet.
Thông số chính
| Dòng sản phẩmRange of product | Altivar Process ATV600 |
|---|---|
| Ứng dụngProduct specific application | Process and utilities |
| Loại sản phẩmProduct or component type | Variable speed drive |
| Biến thểVariant | Standard version |
| Ký hiệu thiết bịDevice short name | ATV630 |
| Cách lắpMounting mode | Floor-standing |
| Giao thức truyền thôngCommunication port protocol | Ethernet | Modbus TCP | Modbus serial |
| [Us] Điện áp nguồn định mức[Us] rated supply voltage | 380…440 V - 15…10 % |
| [Us] Điện áp nguồn định mức[Us] rated supply voltage | 380…440 V |
| Dung sai điện áp lướiRelative symmetric mains voltage tolerance | 10 % |
| Dung sai tần số lướiRelative symmetric network frequency tolerance | 5 % |
| Dòng ra định mứcnominal output current | 302.0 A |
| Cấp bảo vệ IPIP degree of protection | IP21 |
| Dùng choProduct destination | Asynchronous motors | Synchronous motors |
| Bộ lọc EMCEMC filter | Integrated with 150 m conforming to IEC 61800-3 category C3 |
| Cấp bảo vệ IPIP degree of protection | IP21 conforming to IEC 61800-5-1 | IP21 conforming to IEC 60529 |
| Kiểu làm mátType of cooling | Forced convection |
| Tần số nguồnSupply frequency | 50…60 Hz - 5…5 % |
| Công suất động cơ (kW)Motor power kW | 160 kW (normal duty) | 132 kW (heavy duty) |
| Dòng điện đầu vàoLine current | 251 A at 400 V (normal duty) | 210 A at 400 V (heavy duty) | 291 A at 380 V (normal duty) | 244 A at 380 V (heavy duty) |
| Dòng ra liên tụcContinuous output current | 302 A at 2.5 kHz for normal duty | 250 A at 2.5 kHz for heavy duty |
| Speed drive output frequency | 0.1…500 Hz |
| Safety function | STO (safe torque off) SIL 3 |
| Card tùy chọnOption card | Slot A: communication module, Profibus DP V1 | Slot A: communication module, PROFINET | Slot A: communication module, DeviceNet | Slot A: communication module, Modbus TCP/EtherNet/IP | Slot A: communication module, CANopen daisy chain RJ45 | Slot A: communication module, CANopen SUB-D 9 | Slot A: communication module, CANopen screw terminals | Slot A/slot B: digital and analog I/O extension module | Slot A/slot B: output relay extension module | Slot A: communication module, Ethernet IP/Modbus TCP/MD-Link | Communication module, BACnet MS/TP | Communication module, Ethernet Powerlink |
Thông số bổ sung
| Số ngõ vào sốDiscrete input number | 8 |
|---|---|
| Loại ngõ vào sốDiscrete input type | DI7, DI8 programmable as pulse input: 0…30 kHz, 24 V DC (<= 30 V) |
| Discrete input logic | 16 preset speeds |
| Số ngõ ra sốDiscrete output number | 0 |
| Loại ngõ ra sốDiscrete output type | Relay outputs R1A, R1B, R1C 250 V AC 3000 mA | Relay outputs R1A, R1B, R1C 30 V DC 3000 mA | Relay outputs R2A, R2C 250 V AC 5000 mA | Relay outputs R2A, R2C 30 V DC 5000 mA | Relay outputs R3A, R3C 250 V AC 5000 mA | Relay outputs R3A, R3C 30 V DC 5000 mA |
| Số ngõ vào analogAnalogue input number | 3 |
| Loại ngõ vào analogAnalogue input type | AI1, AI2, AI3 software-configurable voltage: 0…10 V DC, impedance: 31.5 kOhm, resolution 12 bits | AI1, AI2, AI3 software-configurable current: 0…20 mA, impedance: 250 Ohm, resolution 12 bits | AI2 voltage analog input: - 10…10 V DC, impedance: 31.5 kOhm, resolution 12 bits |
| Analogue output number | 2 |
| Loại ngõ ra analogAnalogue output type | Software-configurable voltage AQ1, AQ2: 0…10 V DC impedance 470 Ohm, resolution 10 bits | Software-configurable current AQ1, AQ2: 0…20 mA, resolution 10 bits | Software-configurable current DQ-, DQ+: 30 V DC | Software-configurable current DQ-, DQ+: 100 mA |
| Relay output number | 3 |
| Relay output type | Configurable relay logic R1: fault relay NO/NC electrical durability 100000 cycles | Configurable relay logic R2: sequence relay NO electrical durability 100000 cycles | Configurable relay logic R3: sequence relay NO electrical durability 100000 cycles |
| Dòng đóng cắt tối đaMaximum switching current | Relay output R1, R2, R3 on resistive load, cos phi = 1: 3 A at 250 V AC | Relay output R1, R2, R3 on resistive load, cos phi = 1: 3 A at 30 V DC | Relay output R1, R2, R3 on inductive load, cos phi = 0.4 and L/R = 7 ms: 2 A at 250 V AC | Relay output R1, R2, R3 on inductive load, cos phi = 0.4 and L/R = 7 ms: 2 A at 30 V DC |
| Dòng đóng cắt tối thiểuMinimum switching current | Relay output R1, R2, R3: 5 mA at 24 V DC |
| Số pha lướiNetwork number of phases | 3 phases |
| Giao diện vật lýPhysical interface | Ethernet | 2-wire RS 485 |
| Method of access | Slave Modbus TCP |
| Tốc độ truyềnTransmission rate | 10, 100 Mbits | 4800 bps, 9600 bps, 19200 bps, 38.4 Kbps |
| Transmission frame | RTU |
| Điện áp raOutput voltage | <= power supply voltage |
| Permissible temporary current boost | 1.1 x In during 60 s (normal duty) | 1.5 x In during 60 s (heavy duty) |
| Data format | 8 bits, configurable odd, even or no parity |
| Type of polarization | No impedance |
| Frequency resolution | Display unit: 0.1 Hz | Analog input: 0.012/50 Hz |
| Đấu nối điệnElectrical connection | Control: removable screw terminals 0.5…1.5 mm² | Line side: M12 bar - 1 cables 3 x 185 mm² maximum per phase (normal duty) | Line side: M12 bar - 2 cables 3 x 120 mm² maximum per phase (normal duty) | Motor: M12 bar - 2 cables 3 x 185 mm² maximum per phase (normal duty) | Line side: M12 bar - 2 cables 3 x 70 mm² minimum per phase (heavy duty) | Line side: M12 bar - 1 cables 3 x 185 mm² maximum per phase (heavy duty) | Line side: M12 bar - 2 cables 3 x 120 mm² maximum per phase (heavy duty) | Motor: M12 bar - 2 cables 3 x 185 mm² maximum per phase (heavy duty) | Line side: M12 bar - 1 cables 3 x 185 mm² minimum per phase (normal duty) | Line side: M12 bar - 1 cables 3 x 185 mm² minimum per phase (heavy duty) | Line side: M12 bar - 2 cables 3 x 95 mm² minimum per phase (normal duty) | Motor: M12 bar - 1 cables 3 x 185 mm² minimum per phase (normal duty) | Motor: M12 bar - 2 cables 3 x 95 mm² minimum per phase (normal duty) | Motor: M12 bar - 1 cables 3 x 150 mm² minimum per phase (heavy duty) | Motor: M12 bar - 2 cables 3 x 70 mm² minimum per phase (heavy duty) |
| Connector type | RJ45 (on the remote graphic terminal) for Ethernet/Modbus TCP | RJ45 (on the remote graphic terminal) for Modbus serial |
| Exchange mode | Half duplex, full duplex, autonegotiation Ethernet/Modbus TCP |
| Number of addresses | 1…247 for Modbus serial |
| Supply | External supply for digital inputs: 24 V DC (19…30 V), <1.25 mA, protection type: overload and short-circuit protection | Internal supply for reference potentiometer (1 to 10 kOhm): 10.5 V DC +/- 5 %, <10 mA, protection type: overload and short-circuit protection | Internal supply for digital inputs and STO: 24 V DC (21…27 V), <200 mA, protection type: overload and short-circuit protection |
| Báo hiệu tại chỗLocal signalling | 3 LEDs for local diagnostic | 3 LEDs (dual colour) for embedded communication status | 4 LEDs (dual colour) for communication module status | 1 LED (red) for presence of voltage |
| Input compatibility | DI1…DI6: discrete input level 1 PLC conforming to IEC 61131-2 | DI5, DI6: discrete input level 1 PLC conforming to IEC 65A-68 | STOA, STOB: discrete input level 1 PLC conforming to IEC 61131-2 |
| Discrete input logic | Positive logic (source) (DI1…DI8), 11 V (state 1) | Negative logic (sink) (DI1…DI8), > 16 V (state 0), < 10 V (state 1) |
| Sampling duration | 2 ms +/- 0.5 ms (DI1…DI4) - discrete input | 5 ms +/- 1 ms (DI5, DI6) - discrete input | 5 ms +/- 0.1 ms (AI1, AI2, AI3) - analog input | 10 ms +/- 1 ms (AO1) - analog output |
| Accuracy | +/- 0.6 % AI1, AI2, AI3 for a temperature variation 60 °C analog input | +/- 1 % AO1, AO2 for a temperature variation 60 °C analog output |
| Linearity error | AI1, AI2, AI3: +/- 0.15 % of maximum value for analog input | AO1, AO2: +/- 0.2 % for analog output |
| Refresh time | Relay output (R1, R2, R3): 5 ms (+/- 0.5 ms) |
| Isolation | Between power and control terminals |
| Discrete and process manufacturing | Building - HVAC compressor centrifugal | Food and beverage processing other application | Mining mineral and metal fan | Mining mineral and metal pump | Oil and gas fan | Water and waste water other application | Building - HVAC screw compressor | Food and beverage processing pump | Food and beverage processing fan | Food and beverage processing atomization | Oil and gas electro submersible pump (ESP) | Oil and gas water injection pump | Oil and gas jet fuel pump | Oil and gas compressor for refinery | Water and waste water centrifuge pump | Water and waste water positive displacement pump | Water and waste water electro submersible pump (ESP) | Water and waste water screw pump | Water and waste water lobe compressor | Water and waste water screw compressor | Water and waste water compressor centrifugal | Water and waste water fan | Water and waste water conveyor | Water and waste water mixer |
| Power range | 110…220 kW at 380…440 V 3 phases |
| Enclosure mounting | Floor-standing |
| 4 quadrant operation possible | False |
| Chế độ điều khiển động cơ không đồng bộAsynchronous motor control profile | Constant torque standard | Optimized torque mode | Variable torque standard |
| Chế độ điều khiển động cơ đồng bộSynchronous motor control profile | Permanent magnet motor | Synchronous reluctance motor |
| Maximum output frequency | 500 kHz |
| Dốc tăng / giảm tốcAcceleration and deceleration ramps | Linear adjustable separately from 0.01…9999 s |
| Bù trượt động cơMotor slip compensation | Adjustable | Can be suppressed | Not available in permanent magnet motor law | Automatic whatever the load |
| Tần số đóng cắtSwitching frequency | 2.5…8 kHz with derating factor | 2…8 kHz adjustable |
| Tần số đóng cắt danh địnhNominal switching frequency | 2.5 kHz |
| Braking to standstill | By DC injection |
| Brake chopper integrated | False |
| Maximum input current | 291.0 A |
| Maximum output voltage | 440.0 V |
| Công suất biểu kiếnApparent power | 191 kVA at 440 V (normal duty) | 160 kVA at 440 V (heavy duty) |
| Maximum transient current | 332 A during 60 s (normal duty) | 375 A during 60 s (heavy duty) |
| Tần số lướiNetwork frequency | 50…60 Hz |
| Dòng ngắn mạch dự kiếnProspective line Isc | 50 kA |
| Base load current at high overload | 250.0 A |
| Base load current at low overload | 302.0 A |
| Công suất tổn hao (W)Power dissipation in W | 3120 W, switching frequency 2.5 kHz (normal duty) | 4030 W, switching frequency 2.5 kHz (heavy duty) |
| With safety function Safely Limited Speed (SLS) | False |
| With safety function Safe brake management (SBC/SBT) | False |
| With safety function Safe Operating Stop (SOS) | False |
| With safety function Safe Position (SP) | False |
| With safety function Safe programmable logic | False |
| With safety function Safe Speed Monitor (SSM) | False |
| With safety function Safe Stop 1 (SS1) | False |
| With sft fct Safe Stop 2 (SS2) | False |
| With safety function Safe torque off (STO) | True |
| With safety function Safely Limited Position (SLP) | False |
| With safety function Safe Direction (SDI) | False |
| Kiểu bảo vệProtection type | Thermal protection: motor | Safe torque off: motor | Motor phase break: motor | Thermal protection: drive | Safe torque off: drive | Overheating: drive | Overcurrent between output phases and earth: drive | Overload of output voltage: drive | Short-circuit protection: drive | Motor phase break: drive | Overvoltages on the DC bus: drive | Line supply overvoltage: drive | Line supply undervoltage: drive | Line supply phase loss: drive | Overspeed: drive | Break on the control circuit: drive |
| Số lượng mỗi bộQuantity per set | 1 |
| Chiều rộngWidth | 400 mm |
| Chiều caoHeight | 2150 mm |
| Chiều sâuDepth | 605 mm |
| Khối lượng tịnhNet weight | 310 kg |
Môi trường & tiêu chuẩn
| Điện trở cách điệnInsulation resistance | > 1 MOhm 500 V DC for 1 minute to earth |
|---|---|
| Độ ồnNoise level | 69 dB conforming to 86/188/EEC |
| Cấp ô nhiễmPollution degree | 2 conforming to IEC 61800-5-1 |
| Khả năng chịu rungVibration resistance | 1.5 mm peak to peak (f= 2…13 Hz) conforming to IEC 60068-2-6 | 1 gn (f= 13…200 Hz) conforming to IEC 60068-2-6 |
| Khả năng chịu sốcShock resistance | 15 gn for 11 ms conforming to IEC 60068-2-27 |
| Độ ẩm tương đốiRelative humidity | 5…95 % without condensation conforming to IEC 60068-2-3 |
| Nhiệt độ môi trường khi vận hànhAmbient air temperature for operation | -15…40 °C (without derating) | 40…50 °C (with derating factor) |
| Độ cao vận hànhOperating altitude | <= 1000 m without derating | 1000…4800 m with current derating 1 % per 100 m |
| Vị trí lắp đặtOperating position | Vertical +/- 10 degree |
| Chứng nhậnProduct certifications | ATEX | EAC | C-Tick |
| Ký hiệuMarking | CE |
| Tiêu chuẩnStandards | IEC 60204-1 | IEC 61800-2 | IEC 61800-3 | IEC 61800-5-1 |
| Maximum THDI | <48 % full load conforming to IEC 61000-3-12 |
| Tương thích điện từ (EMC)Electromagnetic compatibility | Electrostatic discharge immunity test level 3 conforming to IEC 61000-4-2 | Radiated radio-frequency electromagnetic field immunity test level 3 conforming to IEC 61000-4-3 | Electrical fast transient/burst immunity test level 4 conforming to IEC 61000-4-4 | 1.2/50 µs - 8/20 µs surge immunity test level 3 conforming to IEC 61000-4-5 | Conducted radio-frequency immunity test level 3 conforming to IEC 61000-4-6 |
| Environmental class (during operation) | Class 3C3 according to IEC 60721-3-3 | Class 3S3 according to IEC 60721-3-3 |
| Maximum acceleration under shock impact (during operation) | 40 m/s² at 11 ms |
| Maximum acceleration under vibrational stress (during operation) | 6 m/s² at 13…200 Hz |
| Maximum deflection under vibratory load (during operation) | 1.5 mm at 2…13 Hz |
| Permitted relative humidity (during operation) | Class 3K5 according to EN 60721-3 |
| Volume of cooling air | 720 m3/h |
| Cấp quá ápOvervoltage category | III |
| Regulation loop | Adjustable PID regulator |
| Độ ồnNoise level | 69 dB |
| Cấp ô nhiễmPollution degree | 2 |
| Ambient air transport temperature | -25…70 °C |
| Nhiệt độ bảo quảnAmbient air temperature for storage | -40…70 °C |
Đóng gói
| Cấp đóng gói | Đơn vị | Số lượng | D × R × C | Khối lượng |
|---|---|---|---|---|
| Cấp 1 | PCE | 1 | 75.0 × 85.0 × 258.0 cm | 350.0 kg |
Tài liệu
- Datasheet ATV630C16N4F (PDF)Datasheet
- Discover catalog for Altivar Process ATV600 variable speed drivesCatalog
- Discover catalog for EcoStruxure Automation ExpertCatalog
- Instruction Sheet : ATV600F & ATV900F InstallationHướng dẫn lắp đặt
- ATV630-650 Installation manualHướng dẫn sử dụng
- ATV600 CANopen manual - VW3A3608, VW3A3618, VW3A3628Hướng dẫn sử dụng
- ATV600 Modbus Serial link manual (Embedded)Hướng dẫn sử dụng
- ATV630 ATV650 Getting started Annex: SCCRHướng dẫn sử dụng
- ATV600 Programming manualHướng dẫn sử dụng
- MCADID0000968_3D-CADCAD 2D/3D
- MCADID0000968_3D-simplified.stpCAD 2D/3D
- MCADID0000968_2D-back.dwgCAD 2D/3D
- ATV630 DEVICENET CERTIFICATEChứng chỉ
- ATV6XX-BACNET-CERTIFICATEChứng chỉ
- ATV600 PROFIdrive Certificate with VW3A3647Chứng chỉ
- ATV630F ATV650F ATV930F ATV950F EU DECLARATIONTuyên bố hợp chuẩn (DoC)
- ATV630F ATV650F ATV930F ATV950F UK DECLARATIONTuyên bố hợp chuẩn (DoC)
- Product Environmental Profile - ATV660 DRIVE SYSTEMS IP23 315 / 250 KW 400VHồ sơ môi trường (PEP)
Tài liệu mở tại website Schneider Electric.
Video
- Video: Altivar Process ATV600 Variable Speed DriveVideo giới thiệu
- video: Altivar Process - Advanced Functions & Reliability for MMMVideo giới thiệu
- Video hướng dẫnVideo hướng dẫn
- Video: How to update the Altivar firmware with EcoStruxure Automation Device Maintenance (EADM) ?Video hướng dẫn
Mã khác trong dòng Altivar Process ATV600
Hỏi đáp về ATV630C16N4F
ATV630C16N4F còn sản xuất không?
Có. Theo dữ liệu Schneider Electric, ATV630C16N4F đang được sản xuất và bán thương mại. Fast Group kiểm tra hàng sẵn và thời gian giao khi báo giá.
Mua biến tần Schneider ATV630C16N4F chính hãng ở đâu?
Fast Group cung cấp biến tần Schneider ATV630C16N4F chính hãng, CO/CQ đầy đủ theo lô, giao toàn quốc từ TP.HCM và Vũng Tàu. RFQ nhận trước 16:00 được phản hồi trong ngày làm việc.