Siemens 6GK7342-5DA03-0XE0 là module truyền thông thuộc dòng SIMATIC S7-300. Mô tả đặt hàng theo Siemens: - - spare part - - communications processor CP 342-5 for connection of SIMATIC S7-300 to PROFIBUS DP, S5-compatible, PG/OP and S7 communication.. Thông số nổi bật của 6GK7342-5DA03-0XE0: Cấp bảo vệ: IP20; Kiểu sản phẩm: CP 342-5; Truyền thông: PROFIBUS; Kích thước (R×C×S): 40 mm x 125 mm x 120 mm.

Thông số nổi bật 6GK7342-5DA03-0XE0

Cấp bảo vệIP20
Kiểu sản phẩmCP 342-5
Truyền thôngPROFIBUS
Kích thước (R×C×S)40 mm x 125 mm x 120 mm

Tóm tắt nhanh

Mã đặt hàng (MLFB)6GK7342-5DA03-0XE0
Cách viết khác6GK7 342-5DA03-0XE0, 6GK73425DA030XE0
Dòng sản phẩmSIMATIC S7-300
Loại thiết bịModule truyền thông
Mô tả Siemens- - spare part - - communications processor CP 342-5 for connection of SIMATIC S7-300 to PROFIBUS DP, S5-compatible, PG/OP and S7 communication.
Trạng thái vòng đờiNgừng sản xuất P.M410 since 2025-10-01
Xuất kho tiêu chuẩn (Siemens)1 ngày
Khối lượng tịnh0.337 kg
Xuất xứĐức
Mã HS85176200
EAN4019169190886

Trạng thái vòng đời và mã thay thế

6GK7342-5DA03-0XE0 đã ngừng sản xuất (PM410 từ 01/10/2025). Siemens chỉ còn cung cấp mã này dưới dạng phụ tùng thay thế. Fast Group cung ứng từ nguồn hàng còn lại hoặc mã kế nhiệm tương thích. Trạng thái kiểm tra trên SiePortal ngày 23/09/2026; xem thêm hàng Siemens ngừng sản xuất và mã thay thế.

So sánh 6GK7342-5DA03-0XE0 với các mã cùng dòng SIMATIC S7-300

MãMô tảThông số chínhTrạng thái
6ES7392-1BM01-0AA0Front connector for signal modules with spring-loaded…Front connector for signal modules with…Ngừng sản xuất
6ES7953-8LJ31-0AA0Micro Memory Card for S7-300/C7/ET 200, 3Dung lượng: 512 KBSắp ngừng sản xuất
6ES7953-8LL31-0AA0Micro Memory Card P. S7-300/C7/ET 200, 3Dung lượng: 2 MBSắp ngừng sản xuất
6ES7953-8LM31-0AA0Micro memory card for S7-300/C7/ET 200, 3Micro memory card for S7-300/C7/ET 200, 3Ngừng sản xuất
6ES7953-8LM32-0AA0Micro Memory Card for S7-300/C7/ET 200, 3Dung lượng: 4 MBSắp ngừng sản xuất
6ES7953-8LP31-0AA0Micro Memory Card for S7-300/C7/ET 200, 3Dung lượng: 8 MBSắp ngừng sản xuất
6GK7342-5DA03-0XE0 (đang xem)CP 342-5Cấp bảo vệ: IP20; Truyền thông: PROFIBUSNgừng sản xuất
6GK7343-1EX30-0XE0CP 343-1Switch có quản lý: Không; Cấp bảo vệ: IP20Ngừng sản xuất

Cung ứng 6GK7342-5DA03-0XE0 tại Fast Group

Fast Group – nhà cung cấp thiết bị Siemens chính hãng cho nhà máy và dự án – cung ứng 6GK7342-5DA03-0XE0 với các hạng mục:

  • Xác nhận 6GK7342-5DA03-0XE0 theo nhãn thiết bị hoặc BOM, bao gồm hậu tố phiên bản.
  • Cung ứng từ nguồn hàng còn lại, tình trạng hàng ghi rõ trong báo giá.
  • Hồ sơ CO, CQ, packing list, hóa đơn VAT và tờ khai hải quan theo yêu cầu đơn hàng; giao hàng toàn quốc.

Thông tin cho yêu cầu báo giá 6GK7342-5DA03-0XE0

  • Mã MLFB
  • số lượng
  • hàng mới chính hãng hay surplus
  • firmware (CPU/HMI)
  • yêu cầu CO/CQ
  • thời gian cần hàng
  • địa điểm giao hàng
  • chấp nhận mã thay thế (Có/Không)

Thông số kỹ thuật 6GK7342-5DA03-0XE0 theo datasheet

Bảng dưới đây trích từ datasheet Siemens (tiếng Anh) để tham khảo khi lập yêu cầu kỹ thuật; thông số cuối cùng được xác nhận khi báo giá. Tải datasheet PDF từ Siemens.

Thông tin chung (3)
product type designationCP 342-5
product brand nameSIMATIC NET
Technical Product Detail Pagehttps://i.siemens.com/1P6GK7342-5DA03-0XE0
transfer rate (1)
transfer rate
at the 1st interface / according to PROFIBUS9.6 kbit/s ... 12 Mbit/s
interfaces (5)
number of interfaces / according to Industrial Ethernet0
number of electrical connections
at the 1st interface / according to PROFIBUS1
for power supply1
type of electrical connection
at the 1st interface / according to PROFIBUS9-pin Sub-D socket (RS485)
for power supply4-pole terminal block
supply voltage, current consumption, power loss (9)
type of voltage / of the supply voltageDC
supply voltage / 1 / from backplane bus5 V
supply voltage / external24 V
supply voltage / external / at DC / rated value24 V
relative positive tolerance / at DC / at 24 V20 %
relative negative tolerance / at DC / at 24 V15 %
consumed current
from backplane bus / at DC / at 5 V / typical0.15 A
from external supply voltage / at DC / at 24 V / typical0.25 A
power loss [W]6.75 W
ambient conditions (5)
ambient temperature
during operation0 ... 60 °C
during storage-40 ... +70 °C
during transport-40 ... +70 °C
relative humidity
at 25 °C / without condensation / during operation / maximum95 %
protection class IPIP20
design, dimensions and weights (5)
module formatCompact module S7-300 single width
width40 mm
height125 mm
depth120 mm
net weight0.3 kg
product features, product functions, product components / general (1)
number of units
per CPU / maximum4
performance data / open communication (2)
number of possible connections / for open communication / by means of SEND/RECEIVE blocks / maximum16
data volume
as user data per connection / for open communication / by means of SEND/RECEIVE blocks / maximum240 byte
performance data / PROFIBUS DP (10)
service / as DP master
DPV0Yes
number of DP devices
on DP master / operable124
data volume
of the address range of the inputs / as DP master / total2160 byte
of the address range of the outputs / as DP master / total2160 byte
of the address range of the inputs / per DP device244 byte
of the address range of the outputs / per DP device244 byte
of the address range of the diagnostic data / per DP device240 byte
service / as DP device
DPV0Yes
data volume
of the address range of the inputs / as DP device / total240 byte
of the address range of the outputs / as DP device / total240 byte
performance data / S7 communication (1)
number of possible connections / for S7 communication
maximum16
performance data / multi-protocol mode (2)
number of active connections / with multi-protocol mode
without DP / maximum32
with DP / maximum28
performance data / telecontrol (1)
protocol / is supported
TCP/IPNo
product functions / management, configuration, engineering (2)
configuration software
requiredSTEP 7 V5.1 SP2 or higher / STEP 7 Professional V12 (TIA Portal) or higher
product function / is supported / identification linkYes; acc. to IEC 61406-1:2022
standards, specifications, approvals (4)
certificate of suitability / CE markingYes
certificate of suitability / UKCA markingYes
certificate of suitability / Regulatory Compliance Mark (RCM)Yes
certificate of suitability / EAC approvalYes
standards, specifications, approvals / hazardous environments / header (5)
certificate of suitability / ATEXYes
certificate of suitability / IECExYes
certificate of suitability / ULhazloc approvalYes
certificate of suitability / CCC / for hazardous zone according to GB standardYes
certificate of suitability / FM registrationYes
standards, specifications, approvals / Environmental Product Declaration (5)
Environmental Product DeclarationYes
global warming potential [CO2 eq]
total229.03 kg
during manufacturing17.48 kg
during operation211.2 kg
after end of life0.35 kg
further information / internet links (7)
internet link
to website: Selection guide for cables and connectorshttps://support.industry.siemens.com/cs/ww/en/view/109766358
to web page: selection aid TIA Selection Toolhttps://www.siemens.com/tstcloud
to website: Industrial communicationhttps://www.siemens.com/simatic-net
to web page: SiePortalhttps://sieportal.siemens.com/
to website: Image databasehttps://www.automation.siemens.com/bilddb
to website: CAx-Download-Managerhttps://siemens.com/cax
to website: Industry Online Supporthttps://support.industry.siemens.com
security information (1)
security informationSiemens provides products and solutions with industrial cybersecurity functions that support the secure operation of plants, systems, machines and networks. In order to protect plants, systems, machines and networks against cyber threats, it is necessary to implement - and continuously maintain - a holistic, state-of-the-art industrial cybersecurity concept. Siemens’ products and solutions constitute one element of such a concept. Customers are responsible for preventing unauthorized access to their plants, systems, machines and networks. Such systems, machines and components should only be connected to an enterprise network or the internet if and to the extent such a connection is necessary and only when appropriate security measures (e.g. firewalls and/or network segmentation) are in place. For additional information on industrial cybersecurity measures that may be implemented, please visit www.siemens.com/cybersecurity-industry. Siemens’ products and solutions undergo continuous development to make them more secure. Siemens strongly recommends that product updates are applied as soon as they are available and that the latest product versions are used. Use of product versions that are no longer supported, and failure to apply the latest updates may increase customer’s exposure to cyber threats. To stay informed about product updates, subscribe to the Siemens Industrial Cybersecurity RSS Feed under https://www.siemens.com/cert. (V4.7)
Approvals / Certificates (3)
General Product ApprovalFor use in hazardous locations
For use in hazardous locationsMaritime application
Date9/20/2026Subject to change without notice© Copyright Siemens 2026

Câu hỏi thường gặp về 6GK7342-5DA03-0XE0

6GK7342-5DA03-0XE0 đã ngừng sản xuất chưa, mã thay thế là gì?

6GK7342-5DA03-0XE0 đã ngừng sản xuất (PM410 từ 01/10/2025). Siemens chỉ còn cung cấp mã này dưới dạng phụ tùng thay thế. Fast Group cung ứng từ nguồn hàng còn lại hoặc mã kế nhiệm tương thích. Gửi RFQ để kiểm tra phương án thay thế phù hợp.

Yêu cầu báo giá 6GK7342-5DA03-0XE0 cần những thông tin gì?

Mã đầy đủ, số lượng, thời hạn cần hàng, địa điểm giao và yêu cầu chứng từ. Ghi đủ mã MLFB và phiên bản (ví dụ …-0AB0) in trên nhãn module cũ.

Yêu cầu báo giá

Thiết bị đang vận hành đã ngừng sản xuất: Quý khách vui lòng gửi ảnh nhãn hoặc mã đầy đủ để Fast Group xác nhận nguồn hàng và phương án thay thế.