Siemens 6ES7314-6EH04-0AB0 là CPU PLC thuộc dòng SIMATIC S7-300. Mô tả đặt hàng theo Siemens: SIMATIC S7-300, CPU 314C-2PN/DP compact CPU with 192 KB work memory, 24 DI/16 DO, 4 AI, 2 AO, 1 Pt100, 4 high-speed counters (60 kHz), 1st interface MPI/DP 12 Mbps, 2nd interface Ethernet PROFINET, with 2-port switch, integrated power supply 24 V DC, front connector (2x 40-pole) and Micro Memory Card required. Thông số nổi bật của 6ES7314-6EH04-0AB0: Số ngõ vào số (DI): 24; Số ngõ ra số (DQ): 16; Số ngõ vào analog (AI): 5; Bộ nhớ chương trình: 192 KB.
Thông số nổi bật 6ES7314-6EH04-0AB0
Số ngõ vào số (DI)24
Số ngõ ra số (DQ)16
Số ngõ vào analog (AI)5
Bộ nhớ chương trình192 KB
Số cổng PROFINET1; 2 ports (switch) RJ45
Điện áp nguồn24 V
Tốc độ truyền12 Mbit/s
Tóm tắt nhanh
Mã đặt hàng (MLFB)6ES7314-6EH04-0AB0
Cách viết khác6ES7 314-6EH04-0AB0, 6ES73146EH040AB0
Dòng sản phẩmSIMATIC S7-300
Loại thiết bịCPU PLC
Mô tả SiemensSIMATIC S7-300, CPU 314C-2PN/DP compact CPU with 192 KB work memory, 24 DI/16 DO, 4 AI, 2 AO, 1 Pt100, 4 high-speed counters (60 kHz), 1st interface MPI/DP 12 Mbps, 2nd interface Ethernet PROFINET, with 2-port switch, integrated power supply 24 V DC, front connector (2x 40-pole) and Micro Memory Card required
Trạng thái vòng đờiNgừng sản xuất P.M410 since 2025-10-01; spare-part delivery listed until 2035-10-01
Xuất kho tiêu chuẩn (Siemens)1 ngày
Khối lượng tịnh0.785 kg
Xuất xứĐức
Mã HS85371091
EAN4025515079125
Đại lý Siemens cung cấp 6ES7314-6EH04-0AB0 tại TP.HCM và Vũng Tàu
Mua 6ES7314-6EH04-0AB0 qua một đại lý Siemens có năng lực kỹ thuật giúp tránh sai mã: mô tả đặt hàng, phiên bản và phụ kiện đi kèm được đối chiếu trước khi phát hành PO. Với đơn hàng dự án, Fast Group gộp 6ES7314-6EH04-0AB0 cùng các mã S7-300 khác vào một báo giá, một bộ chứng từ. Xem thêm: đại lý cung cấp thiết bị Siemens cho dầu khí, EPC.
Trạng thái vòng đời và mã thay thế
6ES7314-6EH04-0AB0 đã ngừng sản xuất (PM410 từ 01/10/2025). Siemens chỉ còn cung cấp mã này dưới dạng phụ tùng thay thế đến 01/10/2035. Fast Group hỗ trợ tìm hàng dự phòng hoặc đề xuất mã thay thế tương thích. Trạng thái kiểm tra trên SiePortal ngày 23/09/2026; xem thêm hàng Siemens ngừng sản xuất và mã thay thế.
So sánh 6ES7314-6EH04-0AB0 với các mã cùng dòng SIMATIC S7-300
Bảng giúp chọn đúng mã trong cùng dòng trước khi gửi RFQ; bấm vào mã để xem chi tiết.
| Mã | Mô tả | Thông số chính | Trạng thái |
|---|
| 6ES7307-1KA02-0AA0 | PS307 | Nguồn ra: 24 V/10 A; Điện áp ra: 24 V | Sắp ngừng sản xuất |
| 6ES7313-6CG04-0AB0 | CPU 313C-2 | Số ngõ vào số (DI): 16; Số ngõ ra số (DQ): 16 | Ngừng sản xuất |
| 6ES7314-1AG14-0AB0 | CPU 314 | Số ngõ vào số (DI): 0; Số ngõ ra số (DQ): 0 | Ngừng sản xuất |
| 6ES7314-6EH04-0AB0 (đang xem) | CPU 314C-2 PN/DP | Số ngõ vào số (DI): 24; Số ngõ ra số (DQ): 16 | Ngừng sản xuất |
| 6ES7315-2AH14-0AB0 | CPU 315-2 DP | Số ngõ vào số (DI): 0; Số ngõ ra số (DQ): 0 | Ngừng sản xuất |
| 6ES7315-2EH14-0AB0 | CPU 315-2 PN/DP | Số ngõ vào số (DI): 0; Số ngõ ra số (DQ): 0 | Ngừng sản xuất |
| 6ES7317-2EK14-0AB0 | CPU 317-2 PN/DP | Số ngõ vào số (DI): 0; Số ngõ ra số (DQ): 0 | Ngừng sản xuất |
| 6ES7318-3EL01-0AB0 | CPU 319-3 PN/DP | Số ngõ vào số (DI): 0; Số ngõ ra số (DQ): 0 | Ngừng sản xuất |
Nhà phân phối Siemens chính hãng và nguồn hàng 6ES7314-6EH04-0AB0 tại Việt Nam
Với CPU PLC như 6ES7314-6EH04-0AB0, kênh mua quyết định chứng từ và bảo hành. Đừng chỉ so giá: hãy hỏi hàng nhập từ đâu, có CO/CQ theo lô không, mã trên nhãn có khớp hóa đơn không. Fast Group trả lời cả ba câu ngay trong báo giá 6ES7314-6EH04-0AB0, nên bộ phận mua hàng không phải hỏi lại. Xem thêm: nhà phân phối Siemens chính hãng: kênh mua và cách kiểm tra.
Thông tin cần có khi gửi RFQ 6ES7314-6EH04-0AB0
Ứng dụng tiêu biểu của S7-300: hệ điều khiển giàn khai thác, trạm bơm, nhà máy điện, xi măng và các dây chuyền đang vận hành cần hàng dự phòng. Để báo giá nhanh, vui lòng gửi:
- Mã MLFB
- số lượng
- hàng mới chính hãng hay surplus
- firmware (CPU/HMI)
- yêu cầu CO/CQ
- thời gian cần hàng
- địa điểm giao hàng
- chấp nhận mã thay thế (Có/Không)
- Ghi đủ mã MLFB và phiên bản (ví dụ …-0AB0) in trên nhãn module cũ.
- Cho biết cần hàng mới hay chấp nhận hàng thay thế tương đương.
Thông số kỹ thuật 6ES7314-6EH04-0AB0 theo datasheet
Bảng dưới đây trích từ datasheet Siemens (tiếng Anh) để tham khảo khi lập yêu cầu kỹ thuật; thông số cuối cùng được xác nhận khi báo giá. Tải datasheet PDF từ Siemens.
General information (5)
| Product type designation | CPU 314C-2 PN/DP |
| HW functional status | 01 |
| Firmware version | V3.3 |
| Isochronous mode | Yes; For PROFINET only |
| Programming package | STEP 7 V5.5 or higher with HSP 191 |
Supply voltage (10)
| Rated value (DC) | 24 V |
| permissible range, lower limit (DC) | 19.2 V |
| permissible range, upper limit (DC) | 28.8 V |
| external protection for power supply lines (recommendation) | Miniature circuit breaker, type C; min. 2 A; miniature circuit breaker type B, min. 4 A |
| Mains/voltage failure stored energy time | 5 ms |
| Repeat rate, min. | 1 s |
| Rated value (DC) | 24 V |
| Reverse polarity protection | Yes |
| Rated value (DC) | 24 V |
| Reverse polarity protection | No |
Input current (6)
| Current consumption (rated value) | 850 mA |
| Current consumption (in no-load operation), typ. | 190 mA |
| Inrush current, typ. | 5 A |
| I²t | 0.7 A²·s |
| from load voltage L+ (without load), max. | 80 mA |
| from load voltage L+, max. | 50 mA |
Power loss (1)
Storage (7)
| integrated | 192 kbyte |
| expandable | No |
| Plug-in (MMC) | Yes |
| Plug-in (MMC), max. | 8 Mbyte |
| Data management on MMC (after last programming), min. | 10 a |
| present | Yes; Guaranteed by MMC (maintenance-free) |
| without battery | Yes; Program and data |
CPU processing times (4)
| for bit operations, typ. | 0.06 µs |
| for word operations, typ. | 0.12 µs |
| for fixed point arithmetic, typ. | 0.16 µs |
| for floating point arithmetic, typ. | 0.59 µs |
CPU-blocks (22)
| Number of blocks (total) | 1 024; (DBs, FCs, FBs); the maximum number of loadable blocks can be reduced by the MMC used. |
| Number of elements (total) | 1 024; (DBs, FCs, FBs); the maximum number of loadable blocks can be reduced by the MMC used. |
| Number, max. | 1 024; Number range: 1 to 16000 |
| Size, max. | 64 kbyte |
| Number, max. | 1 024; Number range: 0 to 7999 |
| Size, max. | 64 kbyte |
| Number, max. | 1 024; Number range: 0 to 7999 |
| Size, max. | 64 kbyte |
| Number, max. | see instruction list |
| Size, max. | 64 kbyte |
| Number of free cycle OBs | 1; OB 1 |
| Number of time alarm OBs | 1; OB 10 |
| Number of delay alarm OBs | 2; OB 20, 21 |
| Number of cyclic interrupt OBs | 4; OB 32, 33, 34, 35 |
| Number of process alarm OBs | 1; OB 40 |
| Number of DPV1 alarm OBs | 3; OB 55, 56, 57 |
| Number of isochronous mode OBs | 1; OB 61; only for PROFINET |
| Number of startup OBs | 1; OB 100 |
| Number of asynchronous error OBs | 6; OB 80, 82, 83, 85, 86, 87 (OB83 only for PROFINET IO) |
| Number of synchronous error OBs | 2; OB 121, 122 |
| per priority class | 16 |
| additional within an error OB | 4 |
Counters, timers and their retentivity (17)
| Number | 256 |
| adjustable | Yes |
| preset | Z 0 to Z 7 |
| adjustable | Yes |
| lower limit | 0 |
| upper limit | 999 |
| present | Yes |
| Type | SFB |
| Number | Unlimited (limited only by RAM capacity) |
| Number | 256 |
| adjustable | Yes |
| preset | No retentivity |
| lower limit | 10 ms |
| upper limit | 9 990 s |
| present | Yes |
| Type | SFB |
| Number | Unlimited (limited only by RAM capacity) |
Data areas and their retentivity (8)
| Retentive data area (incl. timers, counters, flags), max. | 64 kbyte |
| Size, max. | 256 byte |
| Retentivity available | Yes; MB 0 to MB 255 |
| Retentivity preset | MB 0 to MB 15 |
| Number of clock memories | 8; 1 memory byte |
| Retentivity adjustable | Yes; via non-retain property on DB |
| Retentivity preset | Yes |
| per priority class, max. | 32 kbyte; Max. 2048 bytes per block |
Address area (19)
| Inputs | 2 048 byte |
| Outputs | 2 048 byte |
| Inputs | 2 003 byte |
| Outputs | 2 010 byte |
| Inputs | 2 048 byte |
| Outputs | 2 048 byte |
| Inputs, adjustable | 2 048 byte |
| Outputs, adjustable | 2 048 byte |
| Inputs, default | 256 byte |
| Outputs, default | 256 byte |
| Number of subprocess images, max. | 1; With PROFINET IO, the length of the user data is limited to 1600 bytes |
| Inputs | 16 048 |
| of which central | 1 016 |
| Outputs | 16 096 |
| of which central | 1 008 |
| Inputs | 1 006 |
| of which central | 253 |
| Outputs | 1 007 |
| of which central | 250 |
Hardware configuration (8)
| Number of expansion units, max. | 3 |
| integrated | 1 |
| via CP | 4 |
| FM | 8 |
| CP, PtP | 8 |
| CP, LAN | 10 |
| Racks, max. | 4 |
| Modules per rack, max. | 8; In rack 3 max. 7 |
Time of day (19)
| Hardware clock (real-time) | Yes |
| retentive and synchronizable | Yes |
| Backup time | 6 wk; At 40 °C ambient temperature |
| Deviation per day, max. | 10 s; Typ.: 2 s |
| Behavior of the clock following POWER-ON | Clock continues running after POWER OFF |
| Behavior of the clock following expiry of backup period | the clock continues at the time of day it had when power was switched off |
| Number | 1 |
| Number/Number range | 0 |
| Range of values | 0 to 2^31 hours (when using SFC 101) |
| Granularity | 1 h |
| retentive | Yes; Must be restarted at each restart |
| supported | Yes |
| to MPI, master | Yes |
| on MPI, device | Yes |
| to DP, master | Yes; With DP slave only slave clock |
| on DP, device | Yes |
| in AS, master | Yes |
| in AS, device | Yes |
| on Ethernet via NTP | Yes; As client |
Digital inputs (18)
| Number of digital inputs | 24 |
| of which inputs usable for technological functions | 16 |
| integrated channels (DI) | 24 |
| Input characteristic curve in accordance with IEC 61131, type 1 | Yes |
| up to 40 °C, max. | 24 |
| up to 60 °C, max. | 12 |
| up to 40 °C, max. | 12 |
| Rated value (DC) | 24 V |
| for signal "0" | -3 to +5V |
| for signal "1" | +15 to +30 V |
| for signal "1", typ. | 8 mA |
| Parameterizable | Yes; 0.1 / 0.3 / 3 / 15 ms (You can reconfigure the input delay of the standard inputs during program runtime. Please note that under certain circumstances your newly set filter time may not be effective until the next filter cycle.) |
| Rated value | 3 ms |
| at "0" to "1", max. | 8 µs; Minimum pulse width/minimum pause between pulses at maximum counting frequency |
| shielded, max. | 1 000 m; 50 m for technological functions |
| unshielded, max. | 600 m; for technological functions: No |
| shielded, max. | 50 m; at maximum count frequency |
| unshielded, max. | not allowed |
Digital outputs (27)
| Number of digital outputs | 16 |
| of which high-speed outputs | 4; Notice: You cannot connect the fast outputs of your CPU in parallel |
| integrated channels (DO) | 16 |
| Short-circuit protection | Yes; Clocked electronically |
| Response threshold, typ. | 1 A |
| Limitation of inductive shutdown voltage to | L+ (-48 V) |
| Controlling a digital input | Yes |
| on lamp load, max. | 5 W |
| lower limit | 48 Ω |
| upper limit | 4 kΩ |
| for signal "1", min. | L+ (-0.8 V) |
| for signal "1" rated value | 500 mA |
| for signal "1" permissible range, min. | 5 mA |
| for signal "1" permissible range, max. | 0.6 A |
| for signal "1" minimum load current | 5 mA |
| for signal "0" residual current, max. | 0.5 mA |
| for uprating | No |
| for redundant control of a load | Yes |
| with resistive load, max. | 100 Hz |
| with inductive load, max. | 0.5 Hz |
| on lamp load, max. | 100 Hz |
| of the pulse outputs, with resistive load, max. | 2.5 kHz |
| up to 40 °C, max. | 3 A |
| up to 60 °C, max. | 2 A |
| up to 40 °C, max. | 2 A |
| shielded, max. | 1 000 m |
| unshielded, max. | 600 m |
Analog inputs (32)
| Number of analog inputs | 5 |
| For voltage/current measurement | 4 |
| For resistance/resistance thermometer measurement | 1 |
| integrated channels (AI) | 5; 4x current/voltage, 1x resistance |
| permissible input voltage for current input (destruction limit), max. | 5 V; Permanent |
| permissible input voltage for voltage input (destruction limit), max. | 30 V; Permanent |
| permissible input current for voltage input (destruction limit), max. | 0.5 mA; Permanent |
| permissible input current for current input (destruction limit), max. | 50 mA; Permanent |
| Electrical input frequency, max. | 400 Hz |
| No-load voltage for resistance-type transmitter, typ. | 3.3 V |
| Constant measurement current for resistance-type transmitter, typ. | 1.25 mA |
| Technical unit for temperature measurement adjustable | Yes; Degrees Celsius / degrees Fahrenheit / Kelvin |
| Voltage | Yes; ±10 V / 100 kΩ; 0 V to 10 V / 100 kΩ |
| Current | Yes; ±20 mA / 100 Ω; 0 mA to 20 mA / 100 Ω; 4 mA to 20 mA / 100 Ω |
| Resistance thermometer | Yes; Pt 100 / 10 MΩ |
| Resistance | Yes; 0 Ω to 600 Ω / 10 MΩ |
| 0 to +10 V | Yes |
| Input resistance (0 to 10 V) | 100 kΩ |
| 0 to 20 mA | Yes |
| Input resistance (0 to 20 mA) | 100 Ω |
| -20 mA to +20 mA | Yes |
| Input resistance (-20 mA to +20 mA) | 100 Ω |
| 4 mA to 20 mA | Yes |
| Input resistance (4 mA to 20 mA) | 100 Ω |
| Pt 100 | Yes |
| Input resistance (Pt 100) | 10 MΩ |
| 0 to 600 ohms | Yes |
| Input resistance (0 to 600 ohms) | 10 MΩ |
| parameterizable | No |
| parameterizable | Yes; by software |
| for resistance thermometer | Pt 100 |
| shielded, max. | 100 m |
Analog outputs (19)
| integrated channels (AO) | 2 |
| Voltage output, short-circuit protection | Yes |
| Voltage output, short-circuit current, max. | 55 mA |
| Current output, no-load voltage, max. | 14 V |
| 0 to 10 V | Yes |
| -10 V to +10 V | Yes |
| 0 to 20 mA | Yes |
| -20 mA to +20 mA | Yes |
| 4 mA to 20 mA | Yes |
| for voltage output two-wire connection | Yes; Without compensation of the line resistances |
| for voltage output four-wire connection | No |
| for current output two-wire connection | Yes |
| with voltage outputs, min. | 1 kΩ |
| with voltage outputs, capacitive load, max. | 0.1 µF |
| with current outputs, max. | 300 Ω |
| with current outputs, inductive load, max. | 0.1 mH |
| Voltages at the outputs towards MANA | 16 V; Permanent |
| Current, max. | 50 mA; Permanent |
| shielded, max. | 200 m |
Analog value generation for the inputs (6)
| Measurement principle | Actual value encryption (successive approximation) |
| Resolution with overrange (bit including sign), max. | 12 bit |
| Integration time, parameterizable | Yes; 16.6 / 20 ms |
| Interference voltage suppression for interference frequency f1 in Hz | 50 / 60 Hz |
| Time constant of the input filter | 0.38 ms |
| Basic execution time of the module (all channels released) | 1 ms |
Analog value generation for the outputs (5)
| Resolution with overrange (bit including sign), max. | 12 bit |
| Conversion time (per channel) | 1 ms |
| for resistive load | 0.6 ms |
| for capacitive load | 1 ms |
| for inductive load | 0.5 ms |
Encoder (8)
| for voltage measurement | Yes |
| for current measurement as 2-wire transducer | Yes; with external supply |
| for current measurement as 4-wire transducer | Yes |
| for resistance measurement with two-wire connection | Yes; Without compensation of the line resistances |
| for resistance measurement with three-wire connection | No |
| for resistance measurement with four-wire connection | No |
| 2-wire sensor | Yes |
| permissible quiescent current (2-wire sensor), max. | 1.5 mA |
Errors/accuracies (21)
| Temperature error (relative to input range), (+/-) | 0.006 %/K |
| Crosstalk between the inputs, min. | 60 dB |
| Repeat accuracy in steady state at 25 °C (relative to input range), (+/-) | 0.06 % |
| Output ripple (relative to output range, bandwidth 0 to 50 kHz), (+/-) | 0.1 % |
| Linearity error (relative to output range), (+/-) | 0.15 % |
| Temperature error (relative to output range), (+/-) | 0.01 %/K |
| Crosstalk between the outputs, min. | 60 dB |
| Repeat accuracy in steady state at 25 °C (relative to output range), (+/-) | 0.06 % |
| Voltage, relative to input range, (+/-) | 1 % |
| Current, relative to input range, (+/-) | 1 % |
| Resistance, relative to input range, (+/-) | 1 % |
| Voltage, relative to output range, (+/-) | 1 % |
| Current, relative to output range, (+/-) | 1 % |
| Voltage, relative to input range, (+/-) | 0.8 %; Linearity error ±0.06 % |
| Current, relative to input range, (+/-) | 0.8 %; Linearity error ±0.06 % |
| Resistance, relative to input range, (+/-) | 0.8 %; Linearity error ±0.2 % |
| Resistance thermometer, relative to input range, (+/-) | 0.8 % |
| Voltage, relative to output range, (+/-) | 0.8 % |
| Current, relative to output range, (+/-) | 0.8 % |
| Series mode interference (peak value of interference < rated value of input range), min. | 30 dB |
| Common mode interference, min. | 40 dB |
Interfaces (3)
| Number of PROFINET interfaces | 1; 2 ports (switch) RJ45 |
| Number of RS 485 interfaces | 1; Combined MPI / PROFIBUS DP |
| Number of RS 422 interfaces | 0 |
1. Interface (51)
| Interface type | Integrated RS 485 interface |
| Isolated | Yes |
| RS 485 | Yes |
| Output current of the interface, max. | 200 mA |
| MPI | Yes |
| PROFIBUS DP master | Yes |
| PROFIBUS DP device | Yes |
| Point-to-point connection | No |
| Transmission rate, max. | 12 Mbit/s |
| PG/OP communication | Yes |
| Routing | Yes |
| Global data communication | Yes |
| S7 basic communication | Yes |
| S7 communication | Yes |
| S7 communication, as client | No; but via CP and loadable FB |
| S7 communication, as server | Yes |
| Transmission rate, max. | 12 Mbit/s |
| max. number of DP devices | 124 |
| PG/OP communication | Yes |
| Routing | Yes |
| Global data communication | No |
| S7 basic communication | Yes; I blocks only |
| S7 communication | Yes |
| S7 communication, as client | No |
| S7 communication, as server | Yes |
| Equidistance | Yes |
| Isochronous mode | No |
| SYNC/FREEZE | Yes |
| activation/deactivation of DP devices | Yes |
| max. number of DP devices that can be activated/deactivated at the same time | 8 |
| Direct data exchange (slave-to-slave communication) | Yes; as subscriber |
| DPV1 | Yes |
| Inputs, max. | 2 kbyte |
| Outputs, max. | 2 kbyte |
| Inputs, max. | 244 byte |
| Outputs, max. | 244 byte |
| Transmission rate, max. | 12 Mbit/s |
| automatic baud rate search | Yes; only with passive interface |
| Address area, max. | 32 |
| User data per address area, max. | 32 byte |
| PG/OP communication | Yes |
| Routing | Yes; Only with active interface |
| Global data communication | No |
| S7 basic communication | No |
| S7 communication | Yes |
| S7 communication, as client | No |
| S7 communication, as server | Yes; Connection configured on one side only |
| Direct data exchange (slave-to-slave communication) | Yes |
| DPV1 | No |
| Inputs | 244 byte |
| Outputs | 244 byte |
2. Interface (61)
| Interface type | PROFINET |
| Isolated | Yes |
| automatic detection of transmission rate | Yes; 10/100 Mbit/s |
| Autonegotiation | Yes |
| Autocrossing | Yes |
| Change of IP address at runtime, supported | Yes |
| RJ 45 (Ethernet) | Yes |
| Number of ports | 2 |
| integrated switch | Yes |
| MPI | No |
| PROFINET IO Controller | Yes; Also simultaneously with IO-Device functionality |
| PROFINET IO Device | Yes; Also simultaneously with IO Controller functionality |
| PROFINET CBA | Yes |
| PROFIBUS DP master | No |
| PROFIBUS DP device | No |
| Open IE communication | Yes; Via TCP/IP, ISO on TCP, and UDP |
| Web server | Yes |
| Media redundancy | Yes |
| Transmission rate, max. | 100 Mbit/s |
| PG/OP communication | Yes |
| Routing | Yes |
| S7 communication | Yes; With loadable FBs, max. configurable connections: 10, max. number of instances: 32 |
| Isochronous mode | Yes; OB 61 |
| IRT | Yes |
| Shared device | Yes |
| Prioritized startup | Yes |
| Number of IO devices with prioritized startup, max. | 32 |
| Number of connectable IO Devices, max. | 128 |
| Of which IO devices with IRT, max. | 64 |
| of which in line, max. | 64 |
| Number of IO Devices with IRT and the option "high flexibility" | 128 |
| of which in line, max. | 61 |
| Number of connectable IO Devices for RT, max. | 128 |
| of which in line, max. | 128 |
| Activation/deactivation of IO Devices | Yes |
| Number of IO Devices that can be simultaneously activated/deactivated, max. | 8 |
| IO Devices changing during operation (partner ports), supported | Yes |
| Number of IO Devices per tool, max. | 8 |
| Device replacement without swap medium | Yes |
| Send cycles | 250 μs, 500 μs,1 ms; 2 ms, 4 ms (not in the case of IRT with "high flexibility" option) |
| Updating time | 250 µs to 512 ms (depending on the operating mode, see Manual "S7-300 CPU 31xC and CPU 31x, technical Data" for more details) |
| Inputs, max. | 2 kbyte |
| Outputs, max. | 2 kbyte |
| User data consistency, max. | 1 024 byte |
| PG/OP communication | Yes |
| Routing | Yes |
| S7 communication | Yes; With loadable FBs, max. configurable connections: 10, max. number of instances: 32 |
| Isochronous mode | No |
| IRT | Yes |
| PROFIenergy | Yes; With SFB 73 / 74 prepared for loadable PROFIenergy standard FB for I-Device |
| Shared device | Yes |
| Number of IO Controllers with shared device, max. | 2 |
| Inputs, max. | 1 440 byte; Per IO Controller with shared device |
| Outputs, max. | 1 440 byte; Per IO Controller with shared device |
| Number, max. | 64 |
| User data per submodule, max. | 1 024 byte |
| acyclic transmission | Yes |
| cyclic transmission | Yes |
| Number of connections, max. | 8 |
| Local port numbers used at the system end | 0, 20, 21, 23, 25, 80, 102, 135, 161, 443, 8080, 34962, 34963, 34964, 65532, 65533, 65534, 65535 |
| Keep-alive function, supported | Yes |
Protocols (17)
| PROFIsafe | No |
| Switchover time on line break, typ. | 200 ms; PROFINET MRP |
| Number of stations in the ring, max. | 50 |
| TCP/IP | Yes; via integrated PROFINET interface and loadable FBs |
| Number of connections, max. | 8 |
| Data length for connection type 01H, max. | 1 460 byte |
| Data length for connection type 11H, max. | 32 768 byte |
| several passive connections per port, supported | Yes |
| ISO-on-TCP (RFC1006) | Yes; via integrated PROFINET interface and loadable FBs |
| Number of connections, max. | 8 |
| Data length, max. | 32 768 byte |
| UDP | Yes; via integrated PROFINET interface and loadable FBs |
| Number of connections, max. | 8 |
| Data length, max. | 1 472 byte |
| supported | Yes |
| User-defined websites | Yes |
| Number of HTTP clients | 5 |
Communication functions (59)
| PG/OP communication | Yes |
| Data record routing | Yes |
| supported | Yes |
| Number of GD loops, max. | 8 |
| Number of GD packets, max. | 8 |
| Number of GD packets, transmitter, max. | 8 |
| Number of GD packets, receiver, max. | 8 |
| Size of GD packets, max. | 22 byte |
| Size of GD packet (of which consistent), max. | 22 byte |
| supported | Yes |
| User data per job, max. | 76 byte |
| User data per job (of which consistent), max. | 76 byte; 76 bytes (with X_SEND or X_RCV); 64 bytes (with X_PUT or X_GET as server) |
| supported | Yes |
| as server | Yes |
| as client | Yes; via integrated PROFINET interface and loadable FB or via CP and loadable FB |
| User data per job, max. | See online help of STEP 7 (shared parameters of the SFBs/FBs and of the SFCs/FCs of S7 Communication) |
| supported | Yes; via CP and loadable FC |
| Setpoint for the CPU communication load | 50 % |
| Number of remote interconnection partners | 32 |
| number of master/device functions | 30 |
| total of all master/device connections | 1 000 |
| data length of all incoming master/device connections, max. | 4 000 byte |
| data length of all outgoing master/device connections, max. | 4 000 byte |
| Number of device-internal and PROFIBUS interconnections | 500 |
| Data length of device-internal und PROFIBUS interconnections, max. | 4 000 byte |
| Data length per connection, max. | 1 400 byte |
| Transmission frequency: Transmission interval, min. | 10 ms |
| Number of incoming interconnections | 200 |
| Number of outgoing interconnections | 200 |
| Data length of all incoming interconnections, max. | 2 000 byte |
| Data length of all outgoing interconnections, max. | 2 000 byte |
| Data length per connection, max. | 450 byte |
| Number of stations that can log on for HMI variables (PN OPC/iMap) | 3; 2x PN OPC/1x iMap |
| HMI variable updating | 500 ms |
| Number of HMI variables | 200 |
| Data length of all HMI variables, max. | 2 000 byte |
| supported | Yes |
| Number of linked PROFIBUS devices | 16 |
| Data length per connection, max. | 240 byte; Slave-dependent |
| overall | 12 |
| overall | 12 |
| usable for PG communication | 11 |
| reserved for PG communication | 1 |
| adjustable for PG communication, min. | 1 |
| adjustable for PG communication, max. | 11 |
| usable for OP communication | 11 |
| reserved for OP communication | 1 |
| adjustable for OP communication, min. | 1 |
| adjustable for OP communication, max. | 11 |
| usable for S7 basic communication | 8 |
| reserved for S7 basic communication | 0 |
| adjustable for S7 basic communication, min. | 0 |
| adjustable for S7 basic communication, max. | 8 |
| usable for S7 communication | 10 |
| reserved for S7 communication | 0 |
| adjustable for S7 communication, min. | 0 |
| adjustable for S7 communication, max. | 10 |
| total number of instances, max. | 32 |
| usable for routing | X1 as MPI: max. 10; X1 as DP master: max. 24; X1 as DP slave (active): max. 14; X2 as PROFINET: 24 max. |
S7 message functions (3)
| Number of login stations for message functions, max. | 12; Depending on the configured connections for PG/OP and S7 basic communication |
| Process diagnostic messages | Yes |
| simultaneously active Alarm_S blocks, max. | 300 |
Test commissioning functions (19)
| Status block | Yes; Up to 2 simultaneously |
| Single step | Yes |
| Number of breakpoints | 4 |
| Status/control variable | Yes |
| Variables | Inputs, outputs, memory bits, DB, times, counters |
| Number of variables, max. | 30 |
| of which status variables, max. | 30 |
| of which control variables, max. | 14 |
| Forcing | Yes |
| Forcing, variables | Inputs, outputs |
| Number of variables, max. | 10 |
| present | Yes |
| Number of entries, max. | 500 |
| adjustable | No |
| of which powerfail-proof | 100; Only the last 100 entries are retained |
| Number of entries readable in RUN, max. | 499 |
| adjustable | Yes; From 10 to 499 |
| preset | 10 |
| can be read out | Yes |
Interrupts/diagnostics/status information (2)
| Status indicator digital input (green) | Yes |
| Status indicator digital output (green) | Yes |
Integrated Functions (9)
| Counter |
| Number of counters | 4; See "Technological Functions" manual |
| Counting frequency, max. | 60 kHz |
| Frequency measurement | Yes |
| Number of frequency meters | 4; up to 60 kHz (see "Technological Functions" manual) |
| controlled positioning | Yes |
| integrated function blocks (closed-loop control) | Yes; PID controller (see "Technological Functions" manual) |
| PID controller | Yes |
| Number of pulse outputs | 4; Pulse width modulation up to 2.5 kHz (see "Technological Functions" Manual) |
| Limit frequency (pulse) | 2.5 kHz |
Potential separation (13)
| Potential separation digital inputs | Yes |
| between the channels | No |
| between the channels and backplane bus | Yes |
| Potential separation digital outputs | Yes |
| between the channels | Yes |
| between the channels, in groups of | 8 |
| between the channels and backplane bus | Yes |
| Potential separation analog inputs | Yes; common for analog I/O |
| between the channels | No |
| between the channels and backplane bus | Yes |
| Potential separation analog outputs | Yes; common for analog I/O |
| between the channels | No |
| between the channels and backplane bus | Yes |
Isolation (1)
| Isolation tested with | 600 V DC |
Ambient conditions (2)
Configuration (14)
| STEP 7 | Yes; V5.5 or higher |
| Command set | see instruction list |
| Nesting levels | 8 |
| System functions (SFC) | see instruction list |
| System function blocks (SFB) | see instruction list |
| LAD | Yes |
| FBD | Yes |
| STL | Yes |
| SCL | Yes |
| CFC | Yes |
| GRAPH | Yes |
| HiGraph® | Yes |
| User program protection/password protection | Yes |
| Block encryption | Yes; With S7 block Privacy |
Dimensions (3)
| Width | 120 mm |
| Height | 125 mm |
| Depth | 130 mm |
Weights (1)
Classifications (14)
| eClass | 16 |
| eClass | 14 |
| eClass | 12 |
| eClass | 9.1 |
| eClass | 9 |
| eClass | 8 |
| eClass | 7.1 |
| eClass | 6 |
| ETIM | 10 |
| ETIM | 9 |
| ETIM | 8 |
| ETIM | 7 |
| IDEA | 4 |
| UNSPSC | 15 |
Approvals / Certificates (3)
| General Product Approval | EMV |
| FM |
| Maritime application | other |
| CCS (China Classification Society) | PROFINET |
Câu hỏi thường gặp về 6ES7314-6EH04-0AB0
Mua 6ES7314-6EH04-0AB0 ở đại lý Siemens nào tại TP.HCM và Vũng Tàu?
Fast Group tiếp nhận RFQ 6ES7314-6EH04-0AB0 tại 150/41 Nguyễn Cư Trinh, P. Cầu Ông Lãnh, TP.HCM và 51 Lê Văn Lộc, P. Vũng Tàu. Gửi mã qua Zalo 0938 888 958 hoặc email minhduc@fastgroup.vn để có báo giá trong ngày làm việc.
Fast Group có phải nhà phân phối Siemens chính hãng cho 6ES7314-6EH04-0AB0 không?
Fast Group là đại lý cung cấp và đơn vị nhập khẩu thiết bị Siemens chính hãng tại Việt Nam. 6ES7314-6EH04-0AB0 được nhập từ nguồn hàng Siemens chính hãng, bàn giao kèm CO/CQ theo lô, hóa đơn VAT và tờ khai hải quan khi hợp đồng yêu cầu.
6ES7314-6EH04-0AB0 đã ngừng sản xuất chưa, mã thay thế là gì?
6ES7314-6EH04-0AB0 đã ngừng sản xuất (PM410 từ 01/10/2025). Siemens chỉ còn cung cấp mã này dưới dạng phụ tùng thay thế đến 01/10/2035. Fast Group hỗ trợ tìm hàng dự phòng hoặc đề xuất mã thay thế tương thích. Gửi RFQ để Fast Group đề xuất mã thay thế phù hợp.
Làm sao để nhận báo giá 6ES7314-6EH04-0AB0 nhanh nhất?
Gửi mã 6ES7314-6EH04-0AB0, số lượng, thời gian cần hàng và nơi giao qua email minhduc@fastgroup.vn hoặc Zalo/điện thoại 0938 888 958, hoặc dùng biểu mẫu RFQ trên trang. Đủ thông tin, báo giá được lập trong ngày làm việc.
Nhận báo giá Siemens 6ES7314-6EH04-0AB0
Gửi mã và số lượng qua email minhduc@fastgroup.vn hoặc Zalo/điện thoại (+84) 938 888 958, hoặc gửi RFQ qua biểu mẫu. Đại lý cung cấp tại TP.HCM và Vũng Tàu, giao toàn quốc. Phản hồi trong ngày làm việc.
