
METSEPM2210 Đồng hồ đo điện năng Schneider EasyLogic™ PM2000 Power Meters
Đồng hồ đo điện năng Schneider Electric METSEPM2210 thuộc dòng EasyLogic™ PM2000 Power Meters.
- GTIN / EAN-13
- 3606480800160
- Xuất xứ (tham khảo)
- Ấn Độ
- Bảo hành hãng
- 18 tháng
- Hàng Schneider chính hãng
- CO/CQ đầy đủ
- Cấp hàng nhanh
Mô tả METSEPM2210
METSEPM2210 là đồng hồ đo điện năng thuộc dòng EasyLogic™ PM2000 Power Meters của Schneider Electric. Ký hiệu thiết bị: PM2210.
Lắp đặt
Về lắp đặt, METSEPM2210 có lắp trên Framework; kiểu lắp gài (clip-on); kích thước rộng × cao × sâu 96 mm × 96 mm × Total : 76.09 mm | Embedded : 61.64 mm; khối lượng tịnh 300 g; đấu nối kiểu Current transformer: screw connection (bottom) 6, Voltage inputs: screw connection (top) 4.
Môi trường làm việc
Điều kiện làm việc theo dữ liệu của hãng: cấp bảo vệ IP54 front: theo IEC 60529, IP30 body: theo IEC 60529; nhiệt độ môi trường khi vận hành -10…60 °C; nhiệt độ bảo quản -25…70 °C; độ cao vận hành <= 2000 m; độ ẩm tương đối 5…95 % ở 50 °C; cấp ô nhiễm 2.
Tiêu chuẩn, chứng nhận và độ bền
METSEPM2210 đáp ứng chứng nhận CE theo IEC 61010-1, CULus theo UL 61010-1, CULus theo CSA C22.2 No 61010-1, RCM, EAC, C-Tick.
Tình trạng sản xuất
METSEPM2210 đang được Schneider Electric sản xuất và bán thương mại.
Đặt hàng
Thông tin đặt hàng: mã vạch GTIN-13 3606480800160; đóng gói cấp 1: 1 PCE; bảo hành hãng 18 tháng; xuất xứ tham khảo Ấn Độ (theo dữ liệu thị trường quốc tế, có thể khác theo lô hàng về Việt Nam). Fast Group cung cấp hàng Schneider Electric chính hãng, CO/CQ đầy đủ theo lô; gửi mã METSEPM2210 và số lượng qua form RFQ để nhận báo giá.
Thông số kỹ thuật METSEPM2210
Tên thông số giữ thuật ngữ tiếng Anh của Schneider (chữ nhỏ) để tiện đối chiếu datasheet.
Thông số chính
| Dòng sản phẩmRange | EasyLogic |
|---|---|
| Tên sản phẩmProduct name | EasyLogic PM2200 |
| Loại sản phẩmProduct or component type | Power meter |
| Ký hiệu thiết bịDevice short name | PM2210 |
Thông số bổ sung
| Ứng dụng thiết bịDevice application | Sub billing | Power monitoring |
|---|---|
| Power quality analysis | total harmonic distortion |
| Type of measurement | Apparent power min/max, total | Active and reactive power min/max, total | Current min/max, avg | Voltage min/max, avg | Frequency min/max, avg | Total current harmonic distortion THD (I) per phase | Total voltage harmonic distortion THD (U) per phase | Power factor min/max, avg | Apparent energy total | Active and reactive energy total |
| Metering type | Voltage U, U21, U32, U13, V, V1, V2, V3 | Unbalance current | Calculated neutral current | Apparent power S, S1, S2, S3 | Peak demand currents | Current I, I1, I2, I3 | Active, reactive, apparent energy (signed, four quadrant) | Active power P, P1, P2, P3 | Reactive power Q, Q1, Q2, Q3 | Peak demand power PM, QM, SM | Demand power P, Q, S |
| Cấp chính xácAccuracy class | Class 1 active energy conforming to IEC 62053-21 | Class 1 reactive energy conforming to IEC 62053-24 |
| Measurement accuracy | Apparent power +/- 1 % | Active energy +/- 1 % | Reactive energy +/- 1 % | Active power +/- 1 % | Voltage +/- 0.5 % | Power factor +/- 0.01 | Current +/- 0.5 % | Frequency +/- 0.05 % |
| Measurement current | 5…6000 mA |
| Measurement voltage | 35…480 V AC 50/60 Hz between phases | 20…277 V AC 50/60 Hz between phase and neutral | 480…999000 V AC 50/60 Hz with external VT |
| Frequency measurement range | 45…65 Hz |
| [Us] Điện áp nguồn định mức[Us] rated supply voltage | 44…277 V AC 45…65 Hz +/- 10 % | 44…277 V DC +/- 10 % |
| Tần số lướiNetwork frequency | 60 Hz | 50 Hz |
| Ride-through time | 100 ms 120 V AC typical | 400 ms 230 V AC typical | 50 ms 125 V DC typical |
| [In] Dòng định mức[In] rated current | 1 A | 5 A |
| Maximum power consumption in VA | 6 VA at 277 V AC |
| Maximum power consumption in W | 3.3 W (power lines (AC)) | 2 W at 277 V (power lines (DC)) |
| input impedance | Current (impedance 5 MOhm) |
| Tamperproof of settings | Protected by access code |
| Display type | Backlit LCD |
| Display colour | Monochrome |
| Display resolution | 128 x 128 pixels |
| Demand intervals | Configurable from 1 to 60 min |
| Information displayed | Demand current (past value) | Demand current (present value) | Demand power (past value) | Demand power (present value) | Voltage | Current | Frequency | Energy consumption | Harmonic distortion | Power factor | Active power | Apparent power | Reactive power | Unbalanced in % | Harmonic amplitude |
| Kiểu điều khiểnControl type | 4 x button |
| Báo hiệu tại chỗLocal signalling | Red LED: output signal 1…9999000 pulse/ k_h (kWh, kVAh, kVARh) | Green LED: module operating (RUN) |
| Number of inputs | 0 |
| Number of outputs | 1 pulse |
| POP parameter | Pulse: 20 ms (5…40 V DC, 20 mA max)1…9999000 pulse/ k_h (kWh, kVAh, kVARh) |
| Impulse duration | 20 ms |
| Giao thức truyền thôngCommunication port protocol | POP |
| Sampling rate | 64 samples/cycle |
| Cybersecurity | Enable/disable communication ports |
| Communication service | Remote monitoring |
| Ngôn ngữ hiển thịUser language | German | English | Chinese | Russian | Spanish | Portuguese | French |
| Chứng nhậnProduct certifications | CE conforming to IEC 61010-1 | CULus conforming to UL 61010-1 | CULus conforming to CSA C22.2 No 61010-1 | RCM | EAC | C-Tick |
| Cách lắpMounting mode | Clip-on |
| Mounting position | Vertical |
| Kiểu lắp đặtMounting support | Framework |
| Provided equipment | 1 x installation guide |
| Measurement category | Category III 480 V | Category II 480…600 V |
| Electrical insulation class | Class II | Double insulation |
| Khả năng chống cháyFlame retardance | V-0 conforming to UL 94 |
| Kiểu đấu nối - đầu cựcConnections - terminals | Current transformer: screw connection (bottom) 6 | Voltage inputs: screw connection (top) 4 |
| Material | Polycarbonate |
| Chiều rộngWidth | 96 mm |
| Chiều sâuDepth | Total : 76.09 mm | Embedded : 61.64 mm |
| Chiều caoHeight | 96 mm |
| Khối lượng tịnhNet weight | 300 g |
| Mã tương thíchCompatibility code | PM2210 |
Môi trường & tiêu chuẩn
| service life | 7 year(s) |
|---|---|
| Cấp bảo vệ IPIP degree of protection | IP54 front: conforming to IEC 60529 | IP30 body: conforming to IEC 60529 |
| Độ ẩm tương đốiRelative humidity | 5…95 % at 50 °C |
| Cấp ô nhiễmPollution degree | 2 |
| Nhiệt độ môi trường khi vận hànhAmbient air temperature for operation | -10…60 °C |
| Nhiệt độ bảo quảnAmbient air temperature for storage | -25…70 °C |
| Độ cao vận hànhOperating altitude | <= 2000 m |
| Tương thích điện từ (EMC)Electromagnetic compatibility | Electrostatic discharge conforming to IEC 61000-4-2 | Radiated radio-frequency electromagnetic field immunity test conforming to IEC 61000-4-3 | Electrical fast transient/burst immunity test conforming to IEC 61000-4-4 | Surge immunity test conforming to IEC 61000-4-5 | Conducted RF disturbances conforming to IEC 61000-4-6 | Magnetic field at power frequency conforming to IEC 61000-4-8 | Voltage dips and interruptions immunity test conforming to IEC 61000-4-11 | Emission tests conforming to FCC part 15 class A |
| Cấp quá ápOvervoltage category | III |
Đóng gói
| Cấp đóng gói | Đơn vị | Số lượng | D × R × C | Khối lượng |
|---|---|---|---|---|
| Cấp 1 | PCE | 1 | 12.500 × 9.000 × 12.000 cm | 353.000 g |
| Cấp 2 | S03 | 18 | 40.000 × 30.000 × 30.000 cm | 6.970 kg |
| Cấp 3 | P06 | 144 | 80.000 × 60.000 × 75.000 cm | 65.760 kg |
Tài liệu
- Datasheet METSEPM2210 (PDF)Datasheet
- EasyLogic™ Power metering range catalogCatalog
- EasyLogic™ PM2200 series User ManualHướng dẫn sử dụng
- NHA2778902-13.pdfHướng dẫn sử dụng
- METSEPM2210_3D-CADCAD 2D/3D
- MCADDE0000210_3D-CADCAD 2D/3D
- METSEPM2210_3D-simplified.stpCAD 2D/3D
- UK DECLARATION OF CONFORMITY PM2000Tuyên bố hợp chuẩn (DoC)
- EU Declaration of ConformityTuyên bố hợp chuẩn (DoC)
- UK Declaration of ConformityTuyên bố hợp chuẩn (DoC)
- IEC_EN61557-12_PM21XX_PM22XXTuyên bố hợp chuẩn (DoC)
- Declaration of Conformity to IEC/EN 61557-12 Edition 2.0Tuyên bố hợp chuẩn (DoC)
- PM2xxxLL4000.fwFirmware
- EasyLogic PM2200, Environmental Disclosure, Product Environmental ProfileHồ sơ môi trường (PEP)
Tài liệu mở tại website Schneider Electric.
Mã khác trong dòng EasyLogic™ PM2000 Power Meters
Hỏi đáp về METSEPM2210
METSEPM2210 còn sản xuất không?
Có. Theo dữ liệu Schneider Electric, METSEPM2210 đang được sản xuất và bán thương mại. Fast Group kiểm tra hàng sẵn và thời gian giao khi báo giá.
Mã vạch (GTIN/EAN) của METSEPM2210 là gì?
GTIN-13 của METSEPM2210 là 3606480800160, dùng để đối chiếu nhãn hàng khi nhận hàng.
Mua đồng hồ đo điện năng Schneider METSEPM2210 chính hãng ở đâu?
Fast Group cung cấp đồng hồ đo điện năng Schneider METSEPM2210 chính hãng, CO/CQ đầy đủ theo lô, giao toàn quốc từ TP.HCM và Vũng Tàu. RFQ nhận trước 16:00 được phản hồi trong ngày làm việc.