Hàng Schneider chính hãngCO/CQ đầy đủCấp hàng nhanhZalo / Hotline (+84) 938 888 958
ATV9A0C63Q6 Biến tần Schneider Altivar Process ATV900
Hình ảnh tham khảo © Schneider Electric
Schneider Electric · Altivar Process ATV900

ATV9A0C63Q6 Biến tần Schneider Altivar Process ATV900

Đang sản xuất

Biến tần Schneider Electric ATV9A0C63Q6 thuộc dòng Altivar Process ATV900: cách lắp lắp trong tủ; thành phần bộ kit 1 control unit, mechanical mounting kits, power connection, set of fuses, 3.0 power module 200 kW, 2 front cover; bộ lọc EMC Integrated with 300 m theo IEC 61800-3 category C3; cấp bảo vệ IP IP00 (for IP21 or IP54 cabinet integration) theo IEC 61800-5-1, IP00 (for IP21 or IP54 cabinet integration) theo IEC 60529.

Biến thể
Modular version
Dùng cho
Synchronous motors | Asynchronous motors
Cách lắp
Cabinet mount
Thành phần bộ kit
1 control unit | mechanical mounting kits | power connection | set of fuses | 3.0 power module 200 kW | 2 front cover
Bộ lọc EMC
Integrated with 300 m conforming to IEC 61800-3 category C3
Cấp bảo vệ IP
IP00 (for IP21 or IP54 cabinet integration) conforming to IEC 61800-5-1 | IP00 (for IP21 or IP54 cabinet integration) conforming to IEC 60529
Kiểu làm mát
Forced convection
Tần số nguồn
50…60 Hz +/- 5 %
Bảo hành hãng
18 tháng
  • Hàng Schneider chính hãng
  • CO/CQ đầy đủ
  • Cấp hàng nhanh

Mô tả ATV9A0C63Q6

ATV9A0C63Q6 là biến tần thuộc dòng Altivar Process ATV900 của Schneider Electric. Ký hiệu thiết bị: ATV9A0. Thông số định mức chính: Biến thể Modular version; Dùng cho động cơ đồng bộ, động cơ không đồng bộ; Cách lắp lắp trong tủ; Thành phần bộ kit 1 control unit, mechanical mounting kits, power connection, set of fuses, 3.0 power module 200 kW, 2 front cover.

Biến tần điều khiển tốc độ động cơ bằng cách thay đổi tần số và điện áp cấp, giúp tiết kiệm năng lượng và điều chỉnh tốc độ theo yêu cầu công nghệ.

Đặc tính kỹ thuật nổi bật

  • Bộ lọc EMC: Integrated with 300 m theo IEC 61800-3 category C3
  • Cấp bảo vệ IP: IP00 (for IP21 or IP54 cabinet integration) theo IEC 61800-5-1, IP00 (for IP21 or IP54 cabinet integration) theo IEC 60529
  • Kiểu làm mát: đối lưu cưỡng bức
  • Tần số nguồn: 50…60 Hz +/- 5 %
  • Số pha lưới: 3 pha
  • [Us] Điện áp nguồn định mức: 690 V - 10…15 %
  • Dòng ngắn mạch dự kiến: 50 kA
  • Permissible temporary current boost: 1.2 x In during 60 s (tải thường), 1.5 x In during 60 s (tải nặng)
  • Chế độ điều khiển động cơ không đồng bộ: Optimized torque mode, Variable torque standard, Constant torque standard
  • Chế độ điều khiển động cơ đồng bộ: Permanent magnet motor, Synchronous reluctance motor
  • Speed drive output frequency: 0.1…599 Hz
  • Tần số đóng cắt danh định: 2.5 kHz

Lắp đặt

Về lắp đặt, ATV9A0C63Q6 có kiểu lắp lắp trong tủ.

Môi trường làm việc

Điều kiện làm việc theo dữ liệu của hãng: cấp bảo vệ IP00 (for IP21 or IP54 cabinet integration) theo IEC 61800-5-1, IP00 (for IP21 or IP54 cabinet integration) theo IEC 60529; nhiệt độ môi trường khi vận hành -5…40 °C without derating, 40…50 °C with derating factor; nhiệt độ bảo quản -40…70 °C; độ cao vận hành 0…2000 m with current derating above 1000m; độ ẩm tương đối 5…95 % without condensation theo IEC 60068-2-3; cấp ô nhiễm 2 theo IEC 61800-5-1.

Tiêu chuẩn, chứng nhận và độ bền

ATV9A0C63Q6 đáp ứng tiêu chuẩn IEC 61800-3, IEC 61800-5-1, IEC 61000-3-12, IEC 60721-3, IEC 61508, IEC 13849-1; chứng nhận TÜV, UL, cUL.

Tình trạng sản xuất

ATV9A0C63Q6 đang được Schneider Electric sản xuất và bán thương mại.

Đặt hàng

Thông tin đặt hàng: bảo hành hãng 18 tháng. Fast Group cung cấp hàng Schneider Electric chính hãng, CO/CQ đầy đủ theo lô; gửi mã ATV9A0C63Q6 và số lượng qua form RFQ để nhận báo giá.

Thông số kỹ thuật ATV9A0C63Q6

Tên thông số giữ thuật ngữ tiếng Anh của Schneider (chữ nhỏ) để tiện đối chiếu datasheet.

Thông số chính

Dòng sản phẩmRange of productAltivar Process ATV900
Loại sản phẩmProduct or component typeVariable speed drive
Ký hiệu thiết bịDevice short nameATV9A0
Biến thểVariantModular version
Dùng choProduct destinationSynchronous motors | Asynchronous motors
Cách lắpMounting modeCabinet mount
Thành phần bộ kitKit composition1 control unit | mechanical mounting kits | power connection | set of fuses | 3.0 power module 200 kW | 2 front cover
Bộ lọc EMCEMC filterIntegrated with 300 m conforming to IEC 61800-3 category C3
Cấp bảo vệ IPIP degree of protectionIP00 (for IP21 or IP54 cabinet integration) conforming to IEC 61800-5-1 | IP00 (for IP21 or IP54 cabinet integration) conforming to IEC 60529
Kiểu làm mátType of coolingForced convection
Tần số nguồnSupply frequency50…60 Hz +/- 5 %
Số pha lướiNetwork number of phases3 phases
[Us] Điện áp nguồn định mức[Us] rated supply voltage690 V - 10…15 %
Dòng ngắn mạch dự kiếnProspective line Isc50 kA
Permissible temporary current boost1.2 x In during 60 s (normal duty) | 1.5 x In during 60 s (heavy duty)
Chế độ điều khiển động cơ không đồng bộAsynchronous motor control profileOptimized torque mode | Variable torque standard | Constant torque standard
Chế độ điều khiển động cơ đồng bộSynchronous motor control profilePermanent magnet motor | Synchronous reluctance motor
Speed drive output frequency0.1…599 Hz
Tần số đóng cắt danh địnhNominal switching frequency2.5 kHz
Tần số đóng cắtSwitching frequency2…4.9 kHz adjustable with derating factor
Safety functionSTO (safe torque off) SIL 3
Giao thức truyền thôngCommunication port protocolEtherNet/IP | Modbus serial | Modbus TCP
Card tùy chọnOption cardSlot A: communication module for Profibus DP V1 | Slot A: communication module for PROFINET | Slot A: communication module for DeviceNet | Slot A: communication module for EtherCAT | Slot A: communication module for CANopen daisy chain RJ45 | Slot A: communication module for CANopen SUB-D 9 | Slot A: communication module for CANopen screw terminals | Slot A/slot B/slot C: digital and analog I/O extension module | Slot A/slot B/slot C: output relay extension module | Slot B: 5/12 V digital encoder interface module | Slot B: analog encoder interface module | Slot B: resolver encoder interface module
Thông số bổ sung
Cấp bảo vệDegree of protectionUL type 1 conforming to UL 61800-5-1 (cabinet integration) | UL type 12 conforming to UL 61800-5-1 (cabinet integration)
Công suất động cơ (kW)Motor power kW630.0 kW at 690 V normal duty | 500.0 kW at 690 V heavy duty
Dòng điện đầu vàoLine current615.0 A at 690 V (normal duty) | 495.0 A at 690 V (heavy duty)
Công suất biểu kiếnApparent power735.0 kVA at 690 V normal duty | 592.0 kVA at 690 V heavy duty
Dòng ra liên tụcContinuous output current650.0 A at 2.5 kHz normal duty | 520.0 A at 2.5 kHz heavy duty
Maximum transient current780.0 A during 60 s (normal duty) | 780.0 A during 60 s (heavy duty)
Bù trượt động cơMotor slip compensationAdjustable | Automatic whatever the load | Not available in permanent magnet motor law | Can be suppressed
Dốc tăng / giảm tốcAcceleration and deceleration rampsLinear adjustable separately from 0.01…9999 s
Kiểu bảo vệProtection typeThermal protection: motor | Safe torque off: motor | Motor phase break: motor | Thermal protection: drive | Safe torque off: drive | Overheating: drive | Overcurrent between output phases and earth: drive | Overload of output voltage: drive | Short-circuit protection: drive | Motor phase break: drive | Overvoltages on the DC bus: drive | Line supply overvoltage: drive | Line supply undervoltage: drive | Line supply phase loss: drive | Overspeed: drive | Break on the control circuit: drive
Frequency resolutionDisplay unit: 0.1 Hz | Analog input: 0.012/50 Hz
Đấu nối điệnElectrical connectionControl: removable screw terminals 0.5…1.5 mm²/20 AWG…16 AWG | Line side: screw terminal | Motor: M10 x 2 bars
Giao diện vật lýPhysical interface2-wire RS 485 for Modbus serial
Transmission frameRTU for Modbus serial
Tốc độ truyềnTransmission rate10/100 Mbit/s for Ethernet IP/Modbus TCP | 4.8, 9.6, 19.2, 38.4 kbit/s for Modbus serial
Exchange modeHalf duplex, full duplex, autonegotiation Ethernet IP/Modbus TCP
Data format8 bits, configurable odd, even or no parity for Modbus serial
Type of polarizationNo impedance for Modbus serial
Number of addresses1…247 for Modbus serial
Method of accessSlave Modbus TCP
SupplyExternal supply for digital inputs: 24 V DC (19…30 V), <1.25 mA, protection type: overload and short-circuit protection | Internal supply for reference potentiometer (1 to 10 kOhm): 10.5 V DC +/- 5 %, <10 mA, protection type: overload and short-circuit protection | Internal supply for digital inputs and STO: 24 V DC (21…27 V), <200 mA, protection type: overload and short-circuit protection
Báo hiệu tại chỗLocal signallingLocal diagnostic: 3 LED (mono/dual colour) | Embedded communication status: 5 LED (dual colour) | Communication module status: 2 LED (dual colour)
Loại ngõ vào analogAnalogue input typeAI1, AI3 software-configurable voltage: 0…10 V DC, impedance: 30 kOhm, resolution 12 bits | AI1, AI3 software-configurable current: 0…20 mA/4…20 mA, impedance: 250 Ohm, resolution 12 bits | AI2 software-configurable voltage: +/- 10 V DC, impedance: 30 kOhm, resolution 12 bits | AI2 software-configurable voltage: 0…10 V DC, impedance: 30 kOhm, resolution 12 bits
Loại ngõ vào sốDiscrete input typeDI1…DI8 programmable, 24 V DC ( 2.2 kOhm
Input compatibilityDI1…DI8: discrete input level 1 PLC conforming to IEC 61131-2 | DI7, DI8: pulse input level 1 PLC conforming to IEC 65A-68 | STOA, STOB: discrete input level 1 PLC conforming to IEC 61131-2
Discrete input logicPositive logic (source) (DI1…DI8), 11 V (state 1) | Negative logic (sink) (DI1…DI8), > 16 V (state 0), 2.5 V (state 1) | Positive logic (source) (STOA, STOB), 11 V (state 1)
Loại ngõ ra analogAnalogue output typeSoftware-configurable voltage AQ1, AQ2: 0…10 V DC impedance 470 Ohm, resolution 10 bits | Software-configurable current AQ1, AQ2: 0…20 mA impedance 500 Ohm, resolution 10 bits
Loại ngõ ra sốDiscrete output typeLogic output DQ+ 0…1 kHz <= 30 V DC 100 mA | Programmable as pulse output DQ+ 0…30 kHz <= 30 V DC 20 mA | Logic output DQ- 0…1 kHz <= 30 V DC 100 mA
Sampling duration2 ms +/- 0.5 ms (DI1…DI8) - discrete input | 5 ms +/- 1 ms (DI7, DI8) - pulse input | 1 ms +/- 1 ms (AI1, AI2, AI3) - analog input | 5 ms +/- 1 ms (AQ1, AQ2) - analog output
Accuracy+/- 0.6 % AI1, AI2, AI3 for a temperature variation 60 °C analog input | +/- 1 % AQ1, AQ2 for a temperature variation 60 °C analog output
Linearity errorAI1, AI2, AI3: +/- 0.15 % of maximum value for analog input | AQ1, AQ2: +/- 0.2 % for analog output
Relay output typeConfigurable relay logic R1: fault relay NO/NC electrical durability 100000 cycles | Configurable relay logic R2: sequence relay NO electrical durability 1000000 cycles | Configurable relay logic R3: sequence relay NO electrical durability 1000000 cycles
Refresh timeRelay output (R1, R2, R3): 5 ms (+/- 0.5 ms)
Dòng đóng cắt tối thiểuMinimum switching currentRelay output R1, R2, R3: 5 mA at 24 V DC
Dòng đóng cắt tối đaMaximum switching currentRelay output R1 on resistive load, cos phi = 1: 3 A at 250 V AC | Relay output R1 on resistive load, cos phi = 1: 3 A at 30 V DC | Relay output R1 on inductive load, cos phi = 0.4 and L/R = 7 ms: 2 A at 250 V AC | Relay output R1 on inductive load, cos phi = 0.4 and L/R = 7 ms: 2 A at 30 V DC | Relay output R2, R3 on resistive load, cos phi = 1: 5 A at 250 V AC | Relay output R2, R3 on resistive load, cos phi = 1: 5 A at 30 V DC | Relay output R2, R3 on inductive load, cos phi = 0.4 and L/R = 7 ms: 2 A at 250 V AC | Relay output R2, R3 on inductive load, cos phi = 0.4 and L/R = 7 ms: 2 A at 30 V DC
Điện trở cách điệnInsulation resistance> 1 MOhm at 500 V DC, 1 min
Môi trường & tiêu chuẩn
Độ ồnNoise level71 dB conforming to 86/188/EEC
Maximum THDI<48 % from 80…100 % of load
Tương thích điện từ (EMC)Electromagnetic compatibilityElectrostatic discharge immunity test level 3 conforming to IEC 61000-4-2 | Radiated radio-frequency electromagnetic field immunity test level 3 conforming to IEC 61000-4-3 | Electrical fast transient/burst immunity test level 4 conforming to IEC 61000-4-4 | 1.2/50 µs - 8/20 µs surge immunity test level 3 conforming to IEC 61000-4-5 | Conducted radio-frequency immunity test level 3 conforming to IEC 61000-4-6
Cấp ô nhiễmPollution degree2 conforming to IEC 61800-5-1
Khả năng chịu rungVibration resistance1.5 mm peak to peak (f= 2…13 Hz) conforming to IEC 60068-2-6 | 0.5 gn (f= 13…200 Hz) conforming to IEC 60068-2-6
Khả năng chịu sốcShock resistance4 gn for 11 ms conforming to IEC 60068-2-27
Độ ẩm tương đốiRelative humidity5…95 % without condensation conforming to IEC 60068-2-3
Nhiệt độ môi trường khi vận hànhAmbient air temperature for operation-5…40 °C without derating | 40…50 °C with derating factor
Nhiệt độ bảo quảnAmbient air temperature for storage-40…70 °C
Độ cao vận hànhOperating altitude0…2000 m with current derating above 1000m
Environmental characteristicChemical pollution resistance class 3C3 conforming to IEC 60721-3-3 | Dust pollution resistance class 3S3 conforming to IEC 60721-3-3
Tiêu chuẩnStandardsIEC 61800-3 | IEC 61800-5-1 | IEC 61000-3-12 | IEC 60721-3 | IEC 61508 | IEC 13849-1
Chứng nhậnProduct certificationsTÜV | UL | cUL
Ký hiệuMarkingCE

Tài liệu

Tài liệu mở tại website Schneider Electric.

Video

Mã khác trong dòng Altivar Process ATV900

Xem toàn bộ dòng Altivar Process ATV900 (148 mã) →

Câu hỏi thường gặp

Hỏi đáp về ATV9A0C63Q6

ATV9A0C63Q6 còn sản xuất không?

Có. Theo dữ liệu Schneider Electric, ATV9A0C63Q6 đang được sản xuất và bán thương mại. Fast Group kiểm tra hàng sẵn và thời gian giao khi báo giá.

Mua biến tần Schneider ATV9A0C63Q6 chính hãng ở đâu?

Fast Group cung cấp biến tần Schneider ATV9A0C63Q6 chính hãng, CO/CQ đầy đủ theo lô, giao toàn quốc từ TP.HCM và Vũng Tàu. RFQ nhận trước 16:00 được phản hồi trong ngày làm việc.