Hàng Schneider chính hãngCO/CQ đầy đủCấp hàng nhanhZalo / Hotline (+84) 938 888 958
ATS490D38Y Khởi động mềm Schneider Altivar Soft Starter ATS490
Hình ảnh tham khảo © Schneider Electric
ATS490D38Y – ảnh 2ATS490D38Y – ảnh 3ATS490D38Y – ảnh 4ATS490D38Y – ảnh 5ATS490D38Y – ảnh 6ATS490D38Y – ảnh 7ATS490D38Y – ảnh 8ATS490D38Y – ảnh 9
Schneider Electric · Altivar Soft Starter ATS490

ATS490D38Y Khởi động mềm Schneider Altivar Soft Starter ATS490

Đang sản xuất

Khởi động mềm Schneider Electric ATS490D38Y thuộc dòng Altivar Soft Starter ATS490: điện áp nguồn Ue 208…690 V AC (- 15…10 %); tần số nguồn 50…60 Hz - 20…20 %; [Ie] Dòng làm việc định mức tải thường: 38 A in line (ở <40 °C); dòng định mức tải nặng 32 A ở 40 °C chế độ tải nặng.

Dùng cho
Asynchronous motors
Số pha lưới
3 phases
Loại tải sử dụng
AC-3A | AC-53a
Điện áp nguồn Ue
208…690 V AC (- 15…10 %)
Tần số nguồn
50…60 Hz - 20…20 %
[Ie] Dòng làm việc định mức
Normal duty: 38 A in line (at <40 °C)
Hệ số dịch vụ tại Ie
100
Dòng định mức tải nặng
32 A at 40 °C for heavy duty
GTIN / EAN-13
3606486948781
Xuất xứ (tham khảo)
Indonesia
Bảo hành hãng
18 tháng
  • Hàng Schneider chính hãng
  • CO/CQ đầy đủ
  • Cấp hàng nhanh

Mô tả ATS490D38Y

ATS490D38Y là khởi động mềm thuộc dòng Altivar Soft Starter ATS490 của Schneider Electric. Ký hiệu thiết bị: ATS490. Thông số định mức chính: Dùng cho động cơ không đồng bộ; Số pha lưới 3 pha; Loại tải sử dụng AC-3A, AC-53a; Điện áp nguồn Ue 208…690 V AC (- 15…10 %).

Khởi động mềm điều khiển điện áp cấp cho động cơ không đồng bộ khi khởi động và dừng, giúp giảm dòng khởi động, giảm sốc cơ khí cho bơm, quạt, băng tải, máy nén.

Đặc tính kỹ thuật nổi bật

  • Ứng dụng: quy trình và hạ tầng
  • Tần số nguồn: 50…60 Hz - 20…20 %
  • [Ie] Dòng làm việc định mức: tải thường: 38 A in line (ở <40 °C)
  • Hệ số dịch vụ tại Ie: 100
  • Dòng định mức tải nặng: 32 A ở 40 °C chế độ tải nặng
  • Điều khiển mô-men: có
  • Cấp bảo vệ IP: IP20
  • Công suất động cơ (kW): 9 kW ở 230 V tải thường, 18.5 kW ở 400 V tải thường, 18.5 kW ở 440 V tải thường, 22 kW ở 500 V tải thường, 22 kW ở 525 V tải thường, 30 kW ở 660 V tải thường, …
  • Công suất động cơ (HP): 10 hp ở 208 V tải thường, 25 hp ở 460 V tải thường, 30 hp ở 575 V tải thường, 7.5 hp ở 208 V tải nặng, 10 hp ở 230 V tải nặng, 20 hp ở 460 V tải nặng, …
  • With safety function Safe torque off (STO): có
  • Safe Torque Off (STO): STO (safe torque off): SIL 1 theo IEC 61508, STO (safe torque off): PL c/category 2 theo ISO 13849
  • Cybersecurity functions: có

Lắp đặt

Về lắp đặt, ATS490D38Y có kích thước rộng × cao × sâu 160 mm × 289 mm × 234 mm; khối lượng tịnh 6 kg.

Môi trường làm việc

Điều kiện làm việc theo dữ liệu của hãng: cấp bảo vệ IP20; nhiệt độ môi trường khi vận hành -25…40 °C (without derating), 40…60 °C (with current derating of 1 % per °C above 40 °C); nhiệt độ bảo quản -40…70 °C; độ cao vận hành 2000…4800 m with current derating 1 % per 100 m above 2000 m; độ ẩm tương đối 5…95 % without condensation or dripping water theo EN/IEC 60068-2-3; cấp ô nhiễm Level 3.

Tiêu chuẩn, chứng nhận và độ bền

ATS490D38Y đáp ứng tiêu chuẩn EN/IEC 60947-4-2, UL 60947-4-2, IEC 60664-1; chứng nhận CE, cULus, UKCA, RCM, CCC, DNV, ….

Tình trạng sản xuất

ATS490D38Y đang được Schneider Electric sản xuất và bán thương mại.

Đặt hàng

Thông tin đặt hàng: mã vạch GTIN-13 3606486948781; đóng gói cấp 1: 1 PCE; bảo hành hãng 18 tháng; xuất xứ tham khảo Indonesia (theo dữ liệu thị trường quốc tế, có thể khác theo lô hàng về Việt Nam). Fast Group cung cấp hàng Schneider Electric chính hãng, CO/CQ đầy đủ theo lô; gửi mã ATS490D38Y và số lượng qua form RFQ để nhận báo giá.

Thông số kỹ thuật ATS490D38Y

Tên thông số giữ thuật ngữ tiếng Anh của Schneider (chữ nhỏ) để tiện đối chiếu datasheet.

Thông số chính

Dòng sản phẩmRange of productAltivar Soft Starter ATS490
Loại sản phẩmProduct or component typeSoft starter
Dùng choProduct destinationAsynchronous motors
Ứng dụngProduct specific applicationProcess and infrastructures
Ký hiệu thiết bịDevice short nameATS490
Số pha lướiNetwork number of phases3 phases
Loại tải sử dụngUtilisation categoryAC-3A | AC-53a
Điện áp nguồn UeUe power supply voltage208…690 V AC (- 15…10 %)
Tần số nguồnpower supply frequency50…60 Hz - 20…20 %
[Ie] Dòng làm việc định mức[Ie] rated operational currentNormal duty: 38 A in line (at <40 °C)
Hệ số dịch vụ tại IeService factor at Ie100
Dòng định mức tải nặngrated current in heavy duty32 A at 40 °C for heavy duty
Điều khiển mô-menTorque controlTrue
Cấp bảo vệ IPIP degree of protectionIP20
Công suất động cơ (kW)Motor power kW9 kW at 230 V in the motor supply line normal duty | 18.5 kW at 400 V in the motor supply line normal duty | 18.5 kW at 440 V in the motor supply line normal duty | 22 kW at 500 V in the motor supply line normal duty | 22 kW at 525 V in the motor supply line normal duty | 30 kW at 660 V in the motor supply line normal duty | 30 kW at 690 V in the motor supply line normal duty | 7.5 kW at 230 V in the motor supply line heavy duty | 15 kW at 400 V in the motor supply line heavy duty | 15 kW at 440 V in the motor supply line heavy duty | 18.5 kW at 500 V in the motor supply line heavy duty | 18.5 kW at 525 V in the motor supply line heavy duty | 22 kW at 660 V in the motor supply line heavy duty | 22 kW at 690 V in the motor supply line heavy duty | 18.5 kW at 230 V to the motor delta terminals normal duty | 30 kW at 400 V to the motor delta terminals normal duty | 15 kW at 230 V to the motor delta terminals heavy duty | 22 kW at 400 V to the motor delta terminals heavy duty
Công suất động cơ (HP)Motor power hp10 hp at 208 V normal duty | 25 hp at 460 V normal duty | 30 hp at 575 V normal duty | 7.5 hp at 208 V heavy duty | 10 hp at 230 V heavy duty | 20 hp at 460 V heavy duty | 25 hp at 575 V heavy duty
With safety function Safe torque off (STO)True
Safe Torque Off (STO)STO (safe torque off): SIL 1 conforming to IEC 61508 | STO (safe torque off): PL c/category 2 conforming to ISO 13849
Cybersecurity functionsTrue
Cybersecurity level and standardSecurity level (SL) 1 conforming to IEC 62443-4-2
Giao thức truyền thôngCommunication port protocolModbus serial | Modbus TCP/EtherNet/IP
Card tùy chọnOption cardCommunication module for CANopen daisy chain | Communication module for CANopen Sub-D | Communication module for CANopen open style | Communication module for Profibus DP V1 | Communication module for PROFINET
Thông số bổ sung
Device connectionIn the motor supply line | Inside delta
Overload current profile400 % Ie for 13 s
On-load factor50 %
Operating cycles/hour10 cyc/h
[Us] control circuit voltage110…230 V AC 50…60 Hz - 15…10 %
Công suất biểu kiếnApparent power70 VA
Integrated motor overload protectionTrue
motor thermal protection classClass 10E
Kiểu bảo vệProtection typePhase failure: mains | Thermal protection: starter | Thermal protection: motor | Current overload: motor | Motor underload: motor | Excessive acceleration time: motor | Motor phase loss detection: motor | Protection against line phase inversion: mains | External thermal protection: motor | Protection delta inside wiring: starter | Short-circuit between motor phase and earth: motor
current limiting %In (5 x Ie maximum)150…700 %
Rated current pwr loss specification38 A
Power loss static current independent19 W
Power loss per device current dependent11 W
Power loss during starting431 W during starting at 40 °C at 400% Ie
Tiêu chuẩnStandardsEN/IEC 60947-4-2 | UL 60947-4-2 | IEC 60664-1
Chứng nhậnProduct certificationsCE | cULus | UKCA | RCM | CCC | DNV | ATEX | EAC | KC
Ký hiệuMarkingCE | CULus | UKCA | RCM | CCC | ATEX | EAC | KC
[Uc] Điện áp cuộn hút / mạch điều khiển[Uc] control circuit voltage24 V DC
Số ngõ vào sốDiscrete input number5
Loại ngõ vào sốDiscrete input type(DI1) digital input, 4.4 kOhm | (DI2) digital input, 4.4 kOhm | (DI3) digital input, 4.4 kOhm | (DI4) digital input, 4.4 kOhm | (STO) digital input, > 1 kOhm
Input compatibilityDI1: discrete input level 1 PLC conforming to EN/IEC 61131-2 | DI2: discrete input level 1 PLC conforming to EN/IEC 61131-2 | DI3: discrete input level 1 PLC conforming to EN/IEC 61131-2 | DI4: discrete input level 1 PLC conforming to EN/IEC 61131-2 | STO: discrete input level 1 PLC conforming to EN/IEC 61131-2
Discrete input logicDigital input DI1 at State 0: 0… 11 V, >= 5 mA | Digital input DI2 at State 0: 0… 11 V, >= 5 mA | Digital input DI3 at State 0: 0… 11 V, >= 5 mA | Digital input DI4 at State 0: 0… 11 V, >= 5 mA | Digital input STO at State 0: 0… 11 V, >= 5 mA
Relay output number3
Relay output typeRelay outputs R1A, R1C NO | Relay outputs R2A, R2C NO | Relay outputs R3A, R3C NO
Dòng đóng cắt tối thiểuMinimum switching current100 mA at 12 V DC for relay outputs
Dòng đóng cắt tối đaMaximum switching currentRelay outputs 2 A / 250 V AC for AC-15 100000 cycles following IEC 60947-5-1 | Relay outputs 2 A / 30 V DC for DC-13 150000 cycles following IEC 60947-5-1
Số ngõ ra sốDiscrete output number2
Loại ngõ ra sốDiscrete output typeProgrammable digital output DQ1 <= 30 V 100 mA | Programmable digital output DQ2 <= 30 V 100 mA
Output compatibilityOpen collector level 1 PLC conforming to IEC 65A-68
Số ngõ vào analogAnalogue input number1
Loại ngõ vào analogAnalogue input typeAI1/PTC1 : PTC/PT 100/PT 1000/KTY84 temperature probe | PTC2 : PTC/PT 100/PT 1000/KTY84 temperature probe | PTC3 : PTC/PT 100/PT 1000/KTY84 temperature probe
Analogue output number1
Loại ngõ ra analogAnalogue output typeCurrent output AQ1 : 0…20 mA/4…20 mA , impedance 470 Ohm
Giao thức truyền thôngCommunication port protocolModbus serial | Modbus TCP/EtherNet/IP
Connector type1 RJ45 for connecting Modbus serial | 1 RJ45 for connecting Modbus TCP/EtherNet/IP
Giao diện vật lýPhysical interface2-wire RS 485 | 100-BASE-TX category 5 or industrial Ethernet
Transmission frameRTU | TCP/UDP
Tốc độ truyềnTransmission rate4.8…38.4 kbps | 100 BASE TX
Data format8 bits, configurable odd, even or no parity 1or 2 stop
Number of addresses0…247 for Modbus serial
Method of accessSlave Modbus serial
Type of polarizationNo impedance for Modbus serial
Display screen availableTrue
Vị trí lắp đặtOperating positionVertical +/- 10 degree
Chiều caoHeight289 mm
Chiều rộngWidth160 mm
Chiều sâuDepth234 mm
Khối lượng tịnhNet weight6 kg
internal bypassTrue
Function availablePre-heating | Smoke extraction | Second motor set | Deceleration with torque control | Braking | Boost | Line contactor control | Reverse contactor control | Anti-jam | Jog | Borehole pump starting | Condition monitoring | Power monitoring | Cybersecure firmware update
material declarationTrue
Môi trường & tiêu chuẩn
Tương thích điện từ (EMC)Electromagnetic compatibilityConducted and radiated emissions level A conforming to IEC 60947-4-2 | Damped oscillating waves level 3 conforming to IEC 61000-4-18 | Electrostatic discharge level 3 conforming to IEC 61000-4-2 | Immunity to electrical transients level 4 conforming to IEC 61000-4-4 | Immunity to radiated radio-electrical interference level 3 conforming to IEC 61000-4-3 | Voltage/current impulse level 3 conforming to IEC 61000-4-5 | Immunity to conducted interference caused by radio-electrical fields level 3 conforming to EN/IEC 61000-4-6
Cấp ô nhiễmPollution degreeLevel 3
[Uimp] Điện áp chịu xung định mức[Uimp] rated impulse withstand voltage6 kV
[Ui] Điện áp cách điện định mức[Ui] rated insulation voltage690 V
Environmental class (during operation)Class 3C3 according to IEC 60721-3-3 | Class 3S3 according to IEC 60721-3-3
Nhiệt độ môi trường khi vận hànhAmbient air temperature for operation-25…40 °C (without derating) | 40…60 °C (with current derating of 1 % per °C above 40 °C)
Nhiệt độ bảo quảnAmbient air temperature for storage-40…70 °C
Ambient air transport temperature-40…70 °C
Độ cao vận hànhOperating altitude2000…4800 m with current derating 1 % per 100 m above 2000 m
Độ ẩm tương đốiRelative humidity5…95 % without condensation or dripping water conforming to EN/IEC 60068-2-3
Maximum deflection under vibratory load (during operation)1.5 mm at 2…13 Hz
Maximum deflection under vibratory load (during storage)1.75 mm at 2…9 Hz
Maximum deflection under vibratory load (during transport)1.75 mm at 2…9 Hz
Maximum acceleration under vibrational stress (during operation)1 gn at 13…200 Hz
Maximum acceleration under vibratory load (during storage)1 gn at 9…200 Hz | 1.5 gn at 200…500 Hz
Maximum acceleration under vibratory load (during transport)1 gn at 9…200 Hz | 1.5 gn at 200…500 Hz
Maximum acceleration under shock impact (during operation)15 gn at 11 ms
Maximum acceleration under shock load (during storage)10 gn at 11 ms
Maximum acceleration under shock load (during transport)10 gn at 11 ms

Đóng gói

Cấp đóng góiĐơn vịSố lượngD × R × CKhối lượng
Cấp 1PCE136.000 × 23.500 × 28.000 cm6.979 kg
Cấp 2S06880.000 × 60.000 × 75.000 cm65.000 kg

Tài liệu

Tài liệu mở tại website Schneider Electric.

Video

Mã liên quan

Thường mua kèm

MãMô tả (Schneider)
GV3L40Motor circuit breaker,TeSys Deca frame 3,3P,40A,magnetic,rotary handle,EverLink terminals
LC1D38P7Contactor, TeSys Deca, 3P(3NO), AC-3/AC-3e, <=440V, 38A, 230V AC 50/60Hz coil, screw clamp terminals
LC1D38M7Contactor, TeSys Deca, 3P(3NO), AC-3/AC-3e, <=440V, 38A, 220V AC 50/60Hz coil, screw clamp terminals
LC1D38F7Contactor, TeSys Deca, 3P(3NO), AC-3/AC-3e, <=440V, 38A, 110V AC 50/60Hz coil, screw clamp terminals

Mã khác trong dòng Altivar Soft Starter ATS490

Xem toàn bộ dòng Altivar Soft Starter ATS490 (21 mã) →

Câu hỏi thường gặp

Hỏi đáp về ATS490D38Y

ATS490D38Y còn sản xuất không?

Có. Theo dữ liệu Schneider Electric, ATS490D38Y đang được sản xuất và bán thương mại. Fast Group kiểm tra hàng sẵn và thời gian giao khi báo giá.

Mã vạch (GTIN/EAN) của ATS490D38Y là gì?

GTIN-13 của ATS490D38Y là 3606486948781, dùng để đối chiếu nhãn hàng khi nhận hàng.

Mua khởi động mềm Schneider ATS490D38Y chính hãng ở đâu?

Fast Group cung cấp khởi động mềm Schneider ATS490D38Y chính hãng, CO/CQ đầy đủ theo lô, giao toàn quốc từ TP.HCM và Vũng Tàu. RFQ nhận trước 16:00 được phản hồi trong ngày làm việc.