
ATS48D38Q Khởi động mềm Schneider Altistart 48
Khởi động mềm Schneider Electric ATS48D38Q thuộc dòng Altistart 48: điện áp nguồn Ue 230…415 V - 15…10 %; tần số nguồn 50…60 Hz - 5…5 %; công suất động cơ (kW) 7.5 kW ở 230 V connection for severe applications, 9 kW ở 230 V connection for standard applications, 15 kW ở 230 V connection to the motor delta terminals for severe applications, 15 kW ở 400 V connection for severe applications, 18.5 kW ở 230 V connection to the motor delta terminals for standard applications, 18.5 kW ở 400 V connection for standard applications, …; loại tải sử dụng AC-53a. Mã đã ngừng sản xuất từ 30/04/2023. Mã thay thế: ATS480D38Y.
- Dùng cho
- Asynchronous motors
- Loại tải sử dụng
- AC-53a
- Điện áp nguồn Ue
- 230…415 V - 15…10 %
- Tần số nguồn
- 50…60 Hz - 5…5 %
- Công suất động cơ (kW)
- 7.5 kW at 230 V connection in the motor supply line for severe applications | 9 kW at 230 V connection in the motor supply line for standard applications | 15 kW at 230 V connection to the motor delta terminals for severe applications | 15 kW at 400 V connection in the motor supply line for severe applications | 18.5 kW at 230 V connection to the motor delta terminals for standard applications | 18.5 kW at 400 V connection in the motor supply line for standard applications | 22 kW at 400 V connection to the motor delta terminals for severe applications | 30 kW at 400 V connection to the motor delta terminals for standard applications
- Bảo hành hãng
- 18 tháng
- Hàng Schneider chính hãng
- CO/CQ đầy đủ
- Cấp hàng nhanh
Mô tả ATS48D38Q
ATS48D38Q là khởi động mềm thuộc dòng Altistart 48 của Schneider Electric. Ký hiệu thiết bị: ATS48. Thông số định mức chính: Dùng cho động cơ không đồng bộ; Loại tải sử dụng AC-53a; Điện áp nguồn Ue 230…415 V - 15…10 %; Tần số nguồn 50…60 Hz - 5…5 %.
Khởi động mềm điều khiển điện áp cấp cho động cơ không đồng bộ khi khởi động và dừng, giúp giảm dòng khởi động, giảm sốc cơ khí cho bơm, quạt, băng tải, máy nén.
Đặc tính kỹ thuật nổi bật
- Ứng dụng: tải nặng industry and pumps
- Công suất động cơ (kW): 7.5 kW ở 230 V connection for severe applications, 9 kW ở 230 V connection for standard applications, 15 kW ở 230 V connection to the motor delta terminals for severe applications, 15 kW ở 400 V connection for severe applications, 18.5 kW ở 230 V connection to the motor delta terminals for standard applications, 18.5 kW ở 400 V connection for standard applications, …
Lắp đặt
Về lắp đặt, ATS48D38Q có kích thước rộng × cao × sâu 160 mm × 275 mm × 190 mm; khối lượng tịnh 4.9 kg.
Môi trường làm việc
Điều kiện làm việc theo dữ liệu của hãng: nhiệt độ môi trường khi vận hành 40…60 °C (with current derating of 2 % per °C), -10…40 °C (without derating); nhiệt độ bảo quản -25…70 °C; độ cao vận hành 1000…2000 m with current derating of 2.2 % per additional 100 m; độ ẩm tương đối 0…95 % without condensation or dripping water theo IEC 60068-2-3.
Tiêu chuẩn, chứng nhận và độ bền
ATS48D38Q đáp ứng tiêu chuẩn IEC 60947-4-2; chứng nhận UL, C-Tick, TCF, DNV, NOM 117, CSA, ….
Tình trạng sản xuất
ATS48D38Q đã ngừng sản xuất từ 30/04/2023. Mã thay thế do hãng công bố: ATS480D38Y.
Đặt hàng
Thông tin đặt hàng: đóng gói cấp 1: 1 PCE; bảo hành hãng 18 tháng. Fast Group cung cấp hàng Schneider Electric chính hãng, CO/CQ đầy đủ theo lô; gửi mã ATS48D38Q và số lượng qua form RFQ để nhận báo giá.
Thông số kỹ thuật ATS48D38Q
Tên thông số giữ thuật ngữ tiếng Anh của Schneider (chữ nhỏ) để tiện đối chiếu datasheet.
Thông số chính
| Dòng sản phẩmRange of product | Altistart 48 |
|---|---|
| Loại sản phẩmProduct or component type | Soft starter |
| Dùng choProduct destination | Asynchronous motors |
| Ứng dụngProduct specific application | Heavy duty industry and pumps |
| Ký hiệu thiết bịDevice short name | ATS48 |
| Loại tải sử dụngUtilisation category | AC-53a |
| Điện áp nguồn UeUe power supply voltage | 230…415 V - 15…10 % |
| Tần số nguồnpower supply frequency | 50…60 Hz - 5…5 % |
| Công suất động cơ (kW)Motor power kW | 7.5 kW at 230 V connection in the motor supply line for severe applications | 9 kW at 230 V connection in the motor supply line for standard applications | 15 kW at 230 V connection to the motor delta terminals for severe applications | 15 kW at 400 V connection in the motor supply line for severe applications | 18.5 kW at 230 V connection to the motor delta terminals for standard applications | 18.5 kW at 400 V connection in the motor supply line for standard applications | 22 kW at 400 V connection to the motor delta terminals for severe applications | 30 kW at 400 V connection to the motor delta terminals for standard applications |
Thông số bổ sung
| Device connection | To the motor delta terminals | In the motor supply line |
|---|---|
| Kiểu bảo vệProtection type | Phase failure: line | Thermal protection: motor | Thermal protection: starter |
| Tiêu chuẩnStandards | IEC 60947-4-2 |
| Chứng nhậnProduct certifications | UL | C-Tick | TCF | DNV | NOM 117 | CSA | SEPRO | CCC | GOST |
| Ký hiệuMarking | CE |
| Số ngõ vào sốDiscrete input number | 5 |
| Loại ngõ vào sốDiscrete input type | PTC, 750 Ohm at 25 °C | (Stop, Run, LI3, LI4) logic, <= 8 mA 4300 Ohm |
| Discrete input logic | Positive logic Stop, Run, LI3, LI4 at State 0: 11 V, >= 5 mA |
| Dòng đóng cắt tối thiểuMinimum switching current | 10 mA at 6 V DC for relay outputs |
| Số ngõ ra sốDiscrete output number | 2 |
| Loại ngõ ra sốDiscrete output type | (LO1) logic output 0 V common configurable | (LO2) logic output 0 V common configurable | (R1) relay outputs fault relay NO | (R2) relay outputs end of starting relay NO | (R3) relay outputs motor powered NO |
| Loại ngõ ra analogAnalogue output type | Current output AO: 0-20 mA or 4-20 mA, impedance <500 Ohm |
| Giao thức truyền thôngCommunication port protocol | Modbus |
| Connector type | 1 RJ45 |
| Communication data link | Serial |
| Giao diện vật lýPhysical interface | RS485 multidrop |
| Tốc độ truyềnTransmission rate | 4800, 9600 or 19200 bps |
| Function available | External bypass (optional) |
| Vị trí lắp đặtOperating position | Vertical +/- 10 degree |
| Chiều caoHeight | 275 mm |
| Chiều rộngWidth | 160 mm |
| Chiều sâuDepth | 190 mm |
| Khối lượng tịnhNet weight | 4.9 kg |
Môi trường & tiêu chuẩn
| Tương thích điện từ (EMC)Electromagnetic compatibility | Conducted and radiated emissions level A conforming to IEC 60947-4-2 | Conducted and radiated emissions level B conforming to IEC 60947-4-2 | Damped oscillating waves level 3 conforming to IEC 61000-4-12 | Electrostatic discharge level 3 conforming to IEC 61000-4-2 | Immunity to electrical transients level 4 conforming to IEC 61000-4-4 | Immunity to radiated radio-electrical interference level 3 conforming to IEC 61000-4-3 | Voltage/current impulse level 3 conforming to IEC 61000-4-5 |
|---|---|
| Độ ẩm tương đốiRelative humidity | 0…95 % without condensation or dripping water conforming to IEC 60068-2-3 |
| Nhiệt độ môi trường khi vận hànhAmbient air temperature for operation | 40…60 °C (with current derating of 2 % per °C) | -10…40 °C (without derating) |
| Nhiệt độ bảo quảnAmbient air temperature for storage | -25…70 °C |
| Độ cao vận hànhOperating altitude | 1000…2000 m with current derating of 2.2 % per additional 100 m |
Đóng gói
| Cấp đóng gói | Đơn vị | Số lượng | D × R × C | Khối lượng |
|---|---|---|---|---|
| Cấp 1 | PCE | 1 | 37.0 × 26.0 × 29.0 cm | 5.765 kg |
| Cấp 2 | P06 | 8 | 60.0 × 80.0 × 73.5 cm | 59.576 kg |
Tài liệu
- Datasheet ATS48D38Q (PDF)Datasheet
- Catalog: Soft start/soft stop units Altistart 48Catalog
- ATS48 Getting started guideHướng dẫn lắp đặt
- ATS48 to ATS480 Substitution ManualHướng dẫn sử dụng
- ATS48 Getting Started - Annex for UL508 (SCCR)Hướng dẫn sử dụng
- MCADID0000856_3D-CADCAD 2D/3D
- ATS48D17-D22-D32-D38-D47_CAD2DMECA_FRONTCAD 2D/3D
- ATS48D17-D22-D32-D38-D47_CAD2DMECA_SIDE-LCAD 2D/3D
- ATS48D17-D47 CCC CERTIFICATEChứng chỉ
- ATS48_CSA_CERTIFICATEChứng chỉ
- Altistart 48, Certificate, ULChứng chỉ
- ATS48 C-TICK CERTIFICATETuyên bố hợp chuẩn (DoC)
- ATS48_UK_DECLARATIONTuyên bố hợp chuẩn (DoC)
- ATV12 C-TICK CERTIFICATETuyên bố hợp chuẩn (DoC)
Tài liệu mở tại website Schneider Electric.
Video
- How to fix communication errors on Altivar drives and Soft Starters ?Video hướng dẫn
- How to substitute an ATS48 with an ATS480?Video hướng dẫn
- How to connect and configure ATS48 with SoMove?Video hướng dẫn
- How to start and stop several cascaded motor in ATS48?Video hướng dẫn
Mã liên quan
Thường mua kèm
| Mã | Mô tả (Schneider) |
|---|---|
GV2L32 | Motor circuit breaker,TeSys Deca frame 2,3P,32A,magnetic,rotary handle,screw clamp terminals |
GV3L40 | Motor circuit breaker,TeSys Deca frame 3,3P,40A,magnetic,rotary handle,EverLink terminals |
LC1D32P7 | Contactor, TeSys Deca, 3P(3NO), AC-3/3e, <=440V, 32A, 230V AC 50/60Hz coil, screw clamp terminals |
LC1D38P7 | Contactor, TeSys Deca, 3P(3NO), AC-3/AC-3e, <=440V, 38A, 230V AC 50/60Hz coil, screw clamp terminals |
Mã khác trong dòng Altistart 48
Hỏi đáp về ATS48D38Q
ATS48D38Q còn mua được không?
ATS48D38Q đã ngừng sản xuất từ 30/04/2023. Mã thay thế Schneider công bố: ATS480D38Y. Fast Group đối chiếu thông số trước khi báo giá.
Mua khởi động mềm Schneider ATS48D38Q chính hãng ở đâu?
Fast Group cung cấp khởi động mềm Schneider ATS48D38Q chính hãng, CO/CQ đầy đủ theo lô, giao toàn quốc từ TP.HCM và Vũng Tàu. RFQ nhận trước 16:00 được phản hồi trong ngày làm việc.