Hàng Schneider chính hãngCO/CQ đầy đủCấp hàng nhanhZalo / Hotline (+84) 938 888 958
ATS480C79Y Khởi động mềm Schneider Altivar Soft Starter ATS480
Hình ảnh tham khảo © Schneider Electric
ATS480C79Y – ảnh 2ATS480C79Y – ảnh 3ATS480C79Y – ảnh 4ATS480C79Y – ảnh 5ATS480C79Y – ảnh 6ATS480C79Y – ảnh 7
Schneider Electric · Altivar Soft Starter ATS480

ATS480C79Y Khởi động mềm Schneider Altivar Soft Starter ATS480

Đang sản xuất

Khởi động mềm Schneider Electric ATS480C79Y thuộc dòng Altivar Soft Starter ATS480: điện áp nguồn Ue 208…690 V - 15…10 %; tần số nguồn 50…60 Hz - 20…20 %; [Ie] Dòng làm việc định mức tải thường: 790.0 A (ở <40 °C); dòng định mức tải nặng 660.0 A ở 40 °C chế độ tải nặng. Là mã thay thế cho ATS48C79Q, ATS48C79Y.

Dùng cho
Asynchronous motors
Số pha lưới
3 phases
Loại tải sử dụng
AC-3A | AC-53a
Điện áp nguồn Ue
208…690 V - 15…10 %
Tần số nguồn
50…60 Hz - 20…20 %
[Ie] Dòng làm việc định mức
Normal duty: 790.0 A (at <40 °C)
Dòng định mức tải nặng
660.0 A at 40 °C for heavy duty
Điều khiển mô-men
True
GTIN / EAN-13
3606481089175
Xuất xứ (tham khảo)
Trung Quốc
Bảo hành hãng
18 tháng
  • Hàng Schneider chính hãng
  • CO/CQ đầy đủ
  • Cấp hàng nhanh

Mô tả ATS480C79Y

ATS480C79Y là khởi động mềm thuộc dòng Altivar Soft Starter ATS480 của Schneider Electric. Ký hiệu thiết bị: ATS480. Thông số định mức chính: Dùng cho động cơ không đồng bộ; Số pha lưới 3 pha; Loại tải sử dụng AC-3A, AC-53a; Điện áp nguồn Ue 208…690 V - 15…10 %.

Khởi động mềm điều khiển điện áp cấp cho động cơ không đồng bộ khi khởi động và dừng, giúp giảm dòng khởi động, giảm sốc cơ khí cho bơm, quạt, băng tải, máy nén.

Đặc tính kỹ thuật nổi bật

  • Ứng dụng: quy trình và hạ tầng
  • Tần số nguồn: 50…60 Hz - 20…20 %
  • [Ie] Dòng làm việc định mức: tải thường: 790.0 A (ở <40 °C)
  • Dòng định mức tải nặng: 660.0 A ở 40 °C chế độ tải nặng
  • Điều khiển mô-men: có
  • Cấp bảo vệ IP: IP00
  • Công suất động cơ (kW): 220.0 kW ở 230 V tải thường, 400.0 kW ở 400 V tải thường, 355.0 kW ở 400 V tải nặng, 500.0 kW ở 440 V tải thường, 400.0 kW ở 440 V tải nặng, 500.0 kW ở 500 V tải thường, …
  • Công suất động cơ (HP): 250.0 hp ở 208 V tải thường, 200.0 hp ở 208 V tải nặng, 300.0 hp ở 230 V tải thường, 250.0 hp ở 230 V tải nặng, 600.0 hp ở 460 V tải thường, 500.0 hp ở 460 V tải nặng, …
  • Card tùy chọn: module truyền thông Profibus DP V1, module truyền thông Modbus TCP/EtherNet/IP, module truyền thông CANopen daisy chain, module truyền thông CANopen Sub-D, module truyền thông CANopen open style, module truyền thông PROFINET

Lắp đặt

Về lắp đặt, ATS480C79Y có kích thước rộng × cao × sâu 770.0 mm × 890.0 mm × 329.0 mm; khối lượng tịnh 115.0 kg.

Môi trường làm việc

Điều kiện làm việc theo dữ liệu của hãng: cấp bảo vệ IP00; nhiệt độ môi trường khi vận hành 40…60 °C (with current derating of 2 % per °C), -15…40 °C (without derating); nhiệt độ bảo quản -25…70 °C; độ cao vận hành 1000…4000 m with current derating 1 % per 100 m; độ ẩm tương đối 0…95 % without condensation or dripping water theo IEC 60068-2-3; cấp ô nhiễm Level 3.

Tiêu chuẩn, chứng nhận và độ bền

ATS480C79Y đáp ứng tiêu chuẩn IEC 60947-4-2, UL 60947-4-2, IEC 60664-1; chứng nhận CE, cULus, CCC, UKCA, RCM, EAC, ….

Tình trạng sản xuất

ATS480C79Y đang được Schneider Electric sản xuất và bán thương mại. ATS480C79Y là mã thay thế cho: ATS48C79Q, ATS48C79Y.

Đặt hàng

Thông tin đặt hàng: mã vạch GTIN-13 3606481089175; đóng gói cấp 1: 1 PCE; bảo hành hãng 18 tháng; xuất xứ tham khảo Trung Quốc (theo dữ liệu thị trường quốc tế, có thể khác theo lô hàng về Việt Nam). Fast Group cung cấp hàng Schneider Electric chính hãng, CO/CQ đầy đủ theo lô; gửi mã ATS480C79Y và số lượng qua form RFQ để nhận báo giá.

Thông số kỹ thuật ATS480C79Y

Tên thông số giữ thuật ngữ tiếng Anh của Schneider (chữ nhỏ) để tiện đối chiếu datasheet.

Thông số chính

Dòng sản phẩmRange of productAltivar Soft Starter ATS480
Loại sản phẩmProduct or component typeSoft starter
Dùng choProduct destinationAsynchronous motors
Ứng dụngProduct specific applicationProcess and infrastructures
Ký hiệu thiết bịDevice short nameATS480
Số pha lướiNetwork number of phases3 phases
Loại tải sử dụngUtilisation categoryAC-3A | AC-53a
Điện áp nguồn UeUe power supply voltage208…690 V - 15…10 %
Tần số nguồnpower supply frequency50…60 Hz - 20…20 %
[Ie] Dòng làm việc định mức[Ie] rated operational currentNormal duty: 790.0 A (at <40 °C)
Dòng định mức tải nặngrated current in heavy duty660.0 A at 40 °C for heavy duty
Điều khiển mô-menTorque controlTrue
Cấp bảo vệ IPIP degree of protectionIP00
Công suất động cơ (kW)Motor power kW220.0 kW at 230 V in the motor supply line normal duty | 400.0 kW at 400 V in the motor supply line normal duty | 355.0 kW at 400 V in the motor supply line heavy duty | 500.0 kW at 440 V in the motor supply line normal duty | 400.0 kW at 440 V in the motor supply line heavy duty | 500.0 kW at 500 V in the motor supply line normal duty | 500.0 kW at 525 V in the motor supply line normal duty | 710.0 kW at 660 V in the motor supply line normal duty | 630.0 kW at 660 V in the motor supply line heavy duty | 710.0 kW at 690 V in the motor supply line normal duty | 630.0 kW at 690 V in the motor supply line heavy duty | 355.0 kW at 230 V to the motor delta terminals normal duty | 315.0 kW at 230 V to the motor delta terminals heavy duty | 630.0 kW at 400 V to the motor delta terminals normal duty | 500.0 kW at 400 V to the motor delta terminals heavy duty
Công suất động cơ (HP)Motor power hp250.0 hp at 208 V normal duty | 200.0 hp at 208 V heavy duty | 300.0 hp at 230 V normal duty | 250.0 hp at 230 V heavy duty | 600.0 hp at 460 V normal duty | 500.0 hp at 460 V heavy duty | 800.0 hp at 575 V normal duty | 600.0 hp at 575 V heavy duty
Card tùy chọnOption cardCommunication module for Profibus DP V1 | Communication module for Modbus TCP/EtherNet/IP | Communication module for CANopen daisy chain | Communication module for CANopen Sub-D | Communication module for CANopen open style | Communication module for PROFINET
Thông số bổ sung
Device connectionIn the motor supply line | To the motor delta terminals
[Us] control circuit voltage110…230 V AC 50/60 Hz - 15…10 %
Công suất biểu kiếnApparent power0.2 kVA
Integrated motor overload protectionTrue
motor thermal protection classClass 10E
Kiểu bảo vệProtection typePhase failure: line | Integrated thermal protection: motor | Thermal protection: starter | Current overload: motor | Underload: motor | Excessive starting time, locked rotor: motor | Motor phase loss: motor | Line supply phase loss: line | Line supply phase loss: motor | Thermal protection: motor
current limiting %In (5 x Ie maximum)150…700 %
Rated current pwr loss specification790.0 A
Power loss static current independent25.0 W
Power loss per device current dependent2517.0 W
Tiêu chuẩnStandardsIEC 60947-4-2 | UL 60947-4-2 | IEC 60664-1
Chứng nhậnProduct certificationsCE | cULus | CCC | UKCA | RCM | EAC | DNV | ABS | BV | CCS
Ký hiệuMarkingCE | CCC | UKCA | EAC | RCM | CULus
[Uc] Điện áp cuộn hút / mạch điều khiển[Uc] control circuit voltage24 V DC
Số ngõ vào sốDiscrete input number4
Loại ngõ vào sốDiscrete input type(STOP) logic inputs, 3500 Ohm | (RUN) logic inputs, 3500 Ohm | (DI3) programmable as logic input, 3500 Ohm | (DI4) programmable as logic input, 3500 Ohm
Input compatibilitySTOP: discrete input level 1 PLC conforming to IEC 61131-2 | RUN: discrete input level 1 PLC conforming to IEC 61131-2 | DI3: discrete input level 1 PLC conforming to IEC 61131-2 | DI4: discrete input level 1 PLC conforming to IEC 61131-2
Discrete input logicProgrammable digital input at State 0: < 5 V
Relay output number3
Relay output typeRelay outputs R1A 1 NO | Relay outputs R1B 1 NO | Relay outputs RIC NO/NC programmable
Dòng đóng cắt tối thiểuMinimum switching current100 mA at 12 V DC for relay outputs
Dòng đóng cắt tối đaMaximum switching currentRelay outputs 2 A at 250 V AC | Relay outputs 2 A at 30 V DC | Relay outputs
Số ngõ ra sốDiscrete output number2
Loại ngõ ra sốDiscrete output type(DQ1) programmable digital output <= 30 V | (DQ2) programmable digital output <= 30 V
Output compatibilityOpen collector level 1 PLC conforming to IEC 65A-68
Số ngõ vào analogAnalogue input number1
Loại ngõ vào analogAnalogue input typeAI1/PTC PTC/Pt 100 temperature probe | PTC2 PTC/Pt 100 temperature probe | PTC3 PTC/Pt 100 temperature probe
Analogue output number1
Loại ngõ ra analogAnalogue output typeCurrent output AQ1: 0…20 mA or 0…10 V, impedance <500 Ohm
Giao thức truyền thôngCommunication port protocolModbus serial
Connector type1 RJ45
Communication data linkSerial
Giao diện vật lýPhysical interface2-wire RS 485
Tốc độ truyềnTransmission rate1200…256000 bit/s
Transmission frameRTU
Data format8 bits, configurable odd, even or no parity
Type of polarizationNo impedance for Modbus serial
Number of addresses0…227 for Modbus serial
Method of accessSlave Modbus serial
Function availableExternal bypass control | Pre-heating | Smoke extraction | Multi-motor cascade | Second motor set | User management | Ports and services hardening | Security event logging | Cybersecure firmware update | Single direction
Display screen availableTrue
Vị trí lắp đặtOperating positionVertical +/- 10 degree
Chiều caoHeight890.0 mm
Chiều rộngWidth770.0 mm
Chiều sâuDepth329.0 mm
Khối lượng tịnhNet weight115.0 kg
Môi trường & tiêu chuẩn
Tương thích điện từ (EMC)Electromagnetic compatibilityConducted and radiated emissions level A conforming to IEC 60947-4-2 | Conducted and radiated emissions with bypass level B conforming to IEC 60947-4-2 | Damped oscillating waves level 3 conforming to IEC 61000-4-12 | Electrostatic discharge level 3 conforming to IEC 61000-4-11 | Immunity to electrical transients level 4 conforming to IEC 61000-4-4 | Immunity to radiated radio-electrical interference level 3 conforming to IEC 61000-4-3 | Voltage/current impulse level 3 conforming to IEC 61000-4-5
Cấp ô nhiễmPollution degreeLevel 3
[Uimp] Điện áp chịu xung định mức[Uimp] rated impulse withstand voltage6 kV
[Ui] Điện áp cách điện định mức[Ui] rated insulation voltage690 V
Environmental class (during operation)Class 3C3 according to IEC 60721-3-3 | Class 3S2 according to IEC 60721-3-3
Độ ẩm tương đốiRelative humidity0…95 % without condensation or dripping water conforming to IEC 60068-2-3
Nhiệt độ môi trường khi vận hànhAmbient air temperature for operation40…60 °C (with current derating of 2 % per °C) | -15…40 °C (without derating)
Nhiệt độ bảo quảnAmbient air temperature for storage-25…70 °C
Độ cao vận hànhOperating altitude1000…4000 m with current derating 1 % per 100 m
Maximum deflection under vibratory load (during operation)1.5 mm at 2…13 Hz
Maximum deflection under vibratory load (during storage)1.75 mm at 2…9 Hz
Maximum deflection under vibratory load (during transport)1.75 mm at 2…9 Hz
Maximum acceleration under vibrational stress (during operation)10 m/s² at 13…200 Hz
Maximum acceleration under vibratory load (during storage)15 m/s² at 200…500 Hz | 10 m/s² at 9…200 Hz
Maximum acceleration under vibratory load (during transport)15 m/s² at 200…500 Hz | 10 m/s² at 9…200 Hz
Maximum acceleration under shock impact (during operation)150 m/s² at 11 ms
Maximum acceleration under shock load (during storage)100 m/s² at 11 ms
Maximum acceleration under shock load (during transport)100 m/s² at 11 ms

Đóng gói

Cấp đóng góiĐơn vịSố lượngD × R × CKhối lượng
Cấp 1PCE1103.0 × 95.0 × 59.0 cm135.0 kg

Tài liệu

Tài liệu mở tại website Schneider Electric.

Video

Mã liên quan

Thay thế cho mã cũ

ATS48C79Q ATS48C79Y

Thường mua kèm

MãMô tả (Schneider)
LC1G800LSEAHigh power contactor, TeSys Giga, 3 pole (3NO), AC-3 <=440V 800A, advanced version, 200…500V wide band AC/DC coil
LC1G800EHENHigh power contactor, TeSys Giga, 3 pole (3NO), AC-3 <lt/>=440V 800A, standard version, 48…130V wide band AC/DC coil
LC1G800KUENHigh power contactor, TeSys Giga, 3 pole (3NO), AC-3 <=440V 800A, standard version, 100…250V wide band AC/DC coil

Mã khác trong dòng Altivar Soft Starter ATS480

Xem toàn bộ dòng Altivar Soft Starter ATS480 (21 mã) →

Câu hỏi thường gặp

Hỏi đáp về ATS480C79Y

ATS480C79Y còn sản xuất không?

Có. Theo dữ liệu Schneider Electric, ATS480C79Y đang được sản xuất và bán thương mại. Fast Group kiểm tra hàng sẵn và thời gian giao khi báo giá.

Mã vạch (GTIN/EAN) của ATS480C79Y là gì?

GTIN-13 của ATS480C79Y là 3606481089175, dùng để đối chiếu nhãn hàng khi nhận hàng.

Mua khởi động mềm Schneider ATS480C79Y chính hãng ở đâu?

Fast Group cung cấp khởi động mềm Schneider ATS480C79Y chính hãng, CO/CQ đầy đủ theo lô, giao toàn quốc từ TP.HCM và Vũng Tàu. RFQ nhận trước 16:00 được phản hồi trong ngày làm việc.