








ATS430C41S6 Khởi động mềm Schneider Altivar Soft Starter ATS430
Khởi động mềm Schneider Electric ATS430C41S6 thuộc dòng Altivar Soft Starter ATS430: điện áp nguồn Ue 208…600 V AC (- 15…10 %); tần số nguồn 50…60 Hz - 20…20 %; [Ie] Dòng làm việc định mức tải thường: 410 A in line (ở <40 °C); điều khiển mô-men có. Là mã thay thế cho ATS22C41Q, ATS22C41S6, ATS22C41S6U.
- Dùng cho
- Asynchronous motors
- Số pha lưới
- 3 phases
- Loại tải sử dụng
- AC-3A | AC-53a
- Điện áp nguồn Ue
- 208…600 V AC (- 15…10 %)
- Tần số nguồn
- 50…60 Hz - 20…20 %
- [Ie] Dòng làm việc định mức
- Normal duty: 410 A in line (at <40 °C)
- Hệ số dịch vụ tại Ie
- 100
- Điều khiển mô-men
- True
- GTIN / EAN-13
- 3606486948729
- Xuất xứ (tham khảo)
- Indonesia
- Bảo hành hãng
- 18 tháng
- Hàng Schneider chính hãng
- CO/CQ đầy đủ
- Cấp hàng nhanh
Mô tả ATS430C41S6
ATS430C41S6 là khởi động mềm thuộc dòng Altivar Soft Starter ATS430 của Schneider Electric. Ký hiệu thiết bị: ATS430. Thông số định mức chính: Dùng cho động cơ không đồng bộ; Số pha lưới 3 pha; Loại tải sử dụng AC-3A, AC-53a; Điện áp nguồn Ue 208…600 V AC (- 15…10 %).
Khởi động mềm điều khiển điện áp cấp cho động cơ không đồng bộ khi khởi động và dừng, giúp giảm dòng khởi động, giảm sốc cơ khí cho bơm, quạt, băng tải, máy nén.
Đặc tính kỹ thuật nổi bật
- Ứng dụng: Standard industrial machines
- Tần số nguồn: 50…60 Hz - 20…20 %
- [Ie] Dòng làm việc định mức: tải thường: 410 A in line (ở <40 °C)
- Hệ số dịch vụ tại Ie: 100
- Điều khiển mô-men: có
- Cấp bảo vệ IP: IP00
- Công suất động cơ (kW): 110 kW ở 230 V in line tải thường, 220 kW ở 400 V in line tải thường, 220 kW ở 440 V in line tải thường, 250 kW ở 500 V in line tải thường, 250 kW ở 525 V in line tải thường
- Công suất động cơ (HP): 125 hp ở 208 V tải thường, 150 hp ở 230 V tải thường, 300 hp ở 460 V tải thường, 350 hp ở 575 V tải thường
- Giao thức truyền thông: Modbus serial
Lắp đặt
Về lắp đặt, ATS430C41S6 có kích thước rộng × cao × sâu 206 mm × 443 mm × 261.2 mm; khối lượng tịnh 16.50 kg.
Môi trường làm việc
Điều kiện làm việc theo dữ liệu của hãng: cấp bảo vệ IP00; nhiệt độ môi trường khi vận hành -25…40 °C (without derating), 40…60 °C (with current derating of 1 % per °C above 40 °C); nhiệt độ bảo quản -40…70 °C; độ cao vận hành 2000…4800 m with current derating 1 % per 100 m above 2000 m; độ ẩm tương đối 5…95 % without condensation or dripping water theo EN/IEC 60068-2-3; cấp ô nhiễm Level 3.
Tiêu chuẩn, chứng nhận và độ bền
ATS430C41S6 đáp ứng tiêu chuẩn EN/IEC 60947-4-2, UL 60947-4-2, IEC 60664-1; chứng nhận cULus, CE, UKCA, CCC, RCM, EAC, ….
Tình trạng sản xuất
ATS430C41S6 đang được Schneider Electric sản xuất và bán thương mại. ATS430C41S6 là mã thay thế cho: ATS22C41Q, ATS22C41S6, ATS22C41S6U.
Đặt hàng
Thông tin đặt hàng: mã vạch GTIN-13 3606486948729; đóng gói cấp 1: 1 PCE; bảo hành hãng 18 tháng; xuất xứ tham khảo Indonesia (theo dữ liệu thị trường quốc tế, có thể khác theo lô hàng về Việt Nam). Fast Group cung cấp hàng Schneider Electric chính hãng, CO/CQ đầy đủ theo lô; gửi mã ATS430C41S6 và số lượng qua form RFQ để nhận báo giá.
Thông số kỹ thuật ATS430C41S6
Tên thông số giữ thuật ngữ tiếng Anh của Schneider (chữ nhỏ) để tiện đối chiếu datasheet.
Thông số chính
| Dòng sản phẩmRange of product | Altivar Soft Starter ATS430 |
|---|---|
| Loại sản phẩmProduct or component type | Soft starter |
| Dùng choProduct destination | Asynchronous motors |
| Ứng dụngProduct specific application | Standard industrial machines |
| Ký hiệu thiết bịDevice short name | ATS430 |
| Số pha lướiNetwork number of phases | 3 phases |
| Loại tải sử dụngUtilisation category | AC-3A | AC-53a |
| Điện áp nguồn UeUe power supply voltage | 208…600 V AC (- 15…10 %) |
| Tần số nguồnpower supply frequency | 50…60 Hz - 20…20 % |
| [Ie] Dòng làm việc định mức[Ie] rated operational current | Normal duty: 410 A in line (at <40 °C) |
| Hệ số dịch vụ tại IeService factor at Ie | 100 |
| Điều khiển mô-menTorque control | True |
| Cấp bảo vệ IPIP degree of protection | IP00 |
| Công suất động cơ (kW)Motor power kW | 110 kW at 230 V in line normal duty | 220 kW at 400 V in line normal duty | 220 kW at 440 V in line normal duty | 250 kW at 500 V in line normal duty | 250 kW at 525 V in line normal duty |
| Công suất động cơ (HP)Motor power hp | 125 hp at 208 V normal duty | 150 hp at 230 V normal duty | 300 hp at 460 V normal duty | 350 hp at 575 V normal duty |
| Giao thức truyền thôngCommunication port protocol | Modbus serial |
Thông số bổ sung
| Device connection | In line |
|---|---|
| Overload current | 400 % Ie for 13 s |
| On-load factor | 50 % |
| Operating cycles/hour | 10 cyc/h |
| [Us] control circuit voltage | 110…230 V AC 50…60 Hz - 15…10 % |
| Công suất biểu kiếnApparent power | 70 VA |
| Integrated motor overload protection | True |
| motor thermal protection class | Class 10E |
| Kiểu bảo vệProtection type | Phase failure: mains | Thermal protection: mains | Thermal protection: starter | Current overload: motor | Motor underload: motor | Excessive acceleration time: motor | Motor phase loss detection: motor | Protection against line phase inversion: mains | External thermal protection: motor | Short-circuit between motor phase and earth: motor |
| current limiting %In (5 x Ie maximum) | 150…700 % |
| Rated current pwr loss specification | 410 A |
| Power loss static current independent | 19 W |
| Power loss per device current dependent | 76 W |
| Power loss during starting | 3462 W during starting at 40 °C at 400% In |
| Tiêu chuẩnStandards | EN/IEC 60947-4-2 | UL 60947-4-2 | IEC 60664-1 |
| Chứng nhậnProduct certifications | cULus | CE | UKCA | CCC | RCM | EAC | KC |
| Ký hiệuMarking | CULus | CE | UKCA | CCC | RCM | EAC | KC |
| [Uc] Điện áp cuộn hút / mạch điều khiển[Uc] control circuit voltage | 24 V DC |
| Số ngõ vào sốDiscrete input number | 4 |
| Loại ngõ vào sốDiscrete input type | (STOP) digital input, 4.4 kOhm | (RUN) digital input, 4.4 kOhm | (DI3) digital input, 4.4 kOhm | (DI4) digital input, 4.4 kOhm |
| Input compatibility | STOP: digital input level 1 PLC conforming to EN/IEC 61131-2 | RUN: digital input level 1 PLC conforming to EN/IEC 61131-2 | DI3: digital input level 1 PLC conforming to EN/IEC 61131-2 | DI4: digital input level 1 PLC conforming to EN/IEC 61131-2 |
| Discrete input logic | Digital input STOP at State 0: 0… 11 V, >= 5 mA | Digital input RUN at State 0: 0… 11 V, >= 5 mA | Digital input DI3 at State 0: 0… 11 V, >= 5 mA | Digital input DI4 at State 0: 0… 11 V, >= 5 mA |
| Relay output number | 2 |
| Relay output type | Relay outputs R1A, R1C NO | Relay outputs R1B, R1C NC | Relay outputs R2A, R2C NO |
| Dòng đóng cắt tối thiểuMinimum switching current | 100 mA at 12 V DC for relay outputs |
| Dòng đóng cắt tối đaMaximum switching current | Relay outputs 2 A / 250 V AC for AC-15 100000 cycles following IEC 60947-5-1 | Relay outputs 2 A / 30 V DC for DC-13 150000 cycles following IEC 60947-5-1 |
| Số ngõ vào analogAnalogue input number | 1 |
| Loại ngõ vào analogAnalogue input type | PTC1 : PTC temperature probe | PTC2 : PTC temperature probe |
| Analogue output number | 1 |
| Loại ngõ ra analogAnalogue output type | Current output AQ1 : 0…20 mA/4…20 mA , impedance 470 Ohm |
| Giao thức truyền thôngCommunication port protocol | Modbus serial RJ45 | Modbus serial open style (DO, D1, PE, COM) |
| Connector type | 1 RJ45 | Open style |
| Giao diện vật lýPhysical interface | 2-wire RS 485 - connector(s): RJ45 | 2-wire RS 485 - connector(s): open style (DO, D1, PE, COM) |
| Transmission frame | RTU : 1 RJ45 | RTU : open style (DO, D1, PE, COM) |
| Tốc độ truyềnTransmission rate | 4.8…38.4 kbps for Modbus serial RJ45 | 0.3…115.2 kbps for Modbus serial open style (DO, D1, PE, COM) |
| Data format | 8 bits, odd, even or no parity, 1 or 2 bits to stop for Modbus serial RJ45 | 8 bits, configurable odd, even or no parity for Modbus serial open style (DO, D1, PE, COM) |
| Number of addresses | 0…247 for Modbus serial |
| Method of access | Slave Modbus serial |
| Type of polarization | No impedance for Modbus serial |
| Display screen available | True |
| Vị trí lắp đặtOperating position | Vertical +/- 10 degree |
| Chiều caoHeight | 443 mm |
| Chiều rộngWidth | 206 mm |
| Chiều sâuDepth | 261.2 mm |
| Khối lượng tịnhNet weight | 16.50 kg |
| internal bypass | True |
| Function available | Single direction | Pre-heating | Power monitoring | Condition monitoring | User management | Ports and services hardening | Security event logging | Cybersecure firmware update | Small motor test |
| material declaration | True |
Môi trường & tiêu chuẩn
| Tương thích điện từ (EMC)Electromagnetic compatibility | Conducted and radiated emissions level A conforming to IEC 60947-4-2 | Electrostatic discharge level 3 conforming to IEC 61000-4-2 | Immunity to radiated radio-electrical interference level 3 conforming to IEC 61000-4-3 | Immunity to electrical transients level 4 conforming to IEC 61000-4-4 | Voltage/current impulse level 3 conforming to IEC 61000-4-5 | Damped oscillating waves level 3 conforming to IEC 61000-4-18 | Immunity to conducted disturbances radio-frequency level 3 conforming to IEC 61000-4-6 |
|---|---|
| Cấp ô nhiễmPollution degree | Level 3 |
| [Uimp] Điện áp chịu xung định mức[Uimp] rated impulse withstand voltage | 6 kV |
| [Ui] Điện áp cách điện định mức[Ui] rated insulation voltage | 600 V |
| Environmental class (during operation) | Class 3C3 according to IEC 60721-3-3 | Class 3S3 according to IEC 60721-3-3 |
| Nhiệt độ môi trường khi vận hànhAmbient air temperature for operation | -25…40 °C (without derating) | 40…60 °C (with current derating of 1 % per °C above 40 °C) |
| Nhiệt độ bảo quảnAmbient air temperature for storage | -40…70 °C |
| Ambient air transport temperature | -40…70 °C |
| Độ cao vận hànhOperating altitude | 2000…4800 m with current derating 1 % per 100 m above 2000 m |
| Độ ẩm tương đốiRelative humidity | 5…95 % without condensation or dripping water conforming to EN/IEC 60068-2-3 |
| Maximum deflection under vibratory load (during operation) | 1.5 mm at 2…13 Hz |
| Maximum deflection under vibratory load (during storage) | 1.75 mm at 2…9 Hz |
| Maximum deflection under vibratory load (during transport) | 1.75 mm at 2…9 Hz |
| Maximum acceleration under vibrational stress (during operation) | 1 gn at 13…200 Hz |
| Maximum acceleration under vibratory load (during storage) | 1 gn at 9…200 Hz | 1.5 gn at 200…500 Hz |
| Maximum acceleration under vibratory load (during transport) | 1 gn at 9…200 Hz | 1.5 gn at 200…500 Hz |
| Maximum acceleration under shock impact (during operation) | 15 gn at 11 ms |
| Maximum acceleration under shock load (during storage) | 10 gn at 11 ms |
| Maximum acceleration under shock load (during transport) | 10 gn at 11 ms |
Đóng gói
| Cấp đóng gói | Đơn vị | Số lượng | D × R × C | Khối lượng |
|---|---|---|---|---|
| Cấp 1 | PCE | 1 | 59.000 × 47.500 × 26.000 cm | 23.000 kg |
| Cấp 2 | P06 | 3 | 80.000 × 60.000 × 61.000 cm | 96.400 kg |
Tài liệu
- Datasheet ATS430C41S6 (PDF)Datasheet
- Discover catalog for Altivar Soft Starter ATS430Catalog
- Getting started with ATS430Hướng dẫn lắp đặt
- Getting started with ATS430 - Annex SCCRHướng dẫn lắp đặt
- ATS430 User ManualHướng dẫn sử dụng
- ATS430 Embedded Modbus RTU manualHướng dẫn sử dụng
- ATS22 to ATS430 Modernization ManualHướng dẫn sử dụng
- Altivar User Manual - How to update the firmware ? EADM - EcoStruxure Automation Device MaintenanceHướng dẫn sử dụng
- ATS430_S3_CADCAD 2D/3D
- ATS430_SIZE_3_3D-simpl.stepCAD 2D/3D
- ATS430_SIZE_3_2D-bottom.dwgCAD 2D/3D
- ATS490 ATS430 cULus CertificateChứng chỉ
- IEC STR Certificate ATS490 & ATS430Chứng chỉ
- ATS490 & ATS430 EAC CertificateChứng chỉ
- KC Declaration ATS430C21S6 to C41S6Tuyên bố hợp chuẩn (DoC)
- ATS430 UK DECLARATIONTuyên bố hợp chuẩn (DoC)
- ATS430 EU DECLARATIONTuyên bố hợp chuẩn (DoC)
- ATS430 RCM DeclarationTuyên bố hợp chuẩn (DoC)
- ATS430_Product_Firmware_V1.2IE05.cmsFirmware
- ATS430_Product_Firmware_V1.2IE05.fwpFirmware
- ATS430_Product_Firmware_V1.2IE05_ReleaseNote.pdfFirmware
- Altivar Soft Starter ATS430 410A, Product Environmental ProfileHồ sơ môi trường (PEP)
Tài liệu mở tại website Schneider Electric.
Video
- ATS430 Promotional videoVideo giới thiệu
- How to video: Getting started with ATS430Video hướng dẫn
- Video: How to update the Altivar firmware with EcoStruxure Automation Device Maintenance (EADM) ?Video hướng dẫn
Mã liên quan
Thay thế cho mã cũ
ATS22C41Q ATS22C41S6 ATS22C41S6U
Thường mua kèm
| Mã | Mô tả (Schneider) |
|---|---|
C63H31M500 Hỏi giá | Circuit breaker, ComPacT NSX630H, 70kA/415VAC, 3 poles, MicroLogic 1.3M trip unit 500A |
LC1G500KUEN | High power contactor, TeSys Giga, 3 pole (3NO), AC-3 <=440V 500A, standard version, 100…250V wide band AC/DC coil |
LC1G500LSEA | High power contactor, TeSys Giga, 3 pole (3NO), AC-3 <=440V 500A, advanced version, 200…500V wide band AC/DC coil |
LC1G500EHEN | High power contactor, TeSys Giga, 3 pole (3NO), AC-3 <=440V 500A, standard version, 48…130V wide band AC/DC coil |
Mã khác trong dòng Altivar Soft Starter ATS430
Hỏi đáp về ATS430C41S6
ATS430C41S6 còn sản xuất không?
Có. Theo dữ liệu Schneider Electric, ATS430C41S6 đang được sản xuất và bán thương mại. Fast Group kiểm tra hàng sẵn và thời gian giao khi báo giá.
Mã vạch (GTIN/EAN) của ATS430C41S6 là gì?
GTIN-13 của ATS430C41S6 là 3606486948729, dùng để đối chiếu nhãn hàng khi nhận hàng.
Mua khởi động mềm Schneider ATS430C41S6 chính hãng ở đâu?
Fast Group cung cấp khởi động mềm Schneider ATS430C41S6 chính hãng, CO/CQ đầy đủ theo lô, giao toàn quốc từ TP.HCM và Vũng Tàu. RFQ nhận trước 16:00 được phản hồi trong ngày làm việc.